Parts for Ge GTS16BCSHRWW: 01 - Doors Parts

The Freezer Door Handle is an OEM replacment part for GE refrigerators. This handle allows for easy opening and closing access to frozen food items.

Causes of a problematic handle could include cracked or broken mounting posts after years of use. UV exposure from sunlight may also degrade surface plastics or discolor the finish.

Symptoms of a bad freezer handle include:

• Difficulty opening the door without both hands
• The handle detaching completely from the door
• Inability to securely latch or close the freezer door
• Stress cracks or aged discoloration of plastics

This GE OEM part is also compatible with Hotpoint, RCA and select Kenmore models.

The Fresh Food Door Handle is an OEM part for GE refrigerators. This handle is attached to the refrigerator's fresh food compartment door, providing a sturdy grip for opening and closing the door. Measure: Depth 20 in, Height 3.5 in, Width 3.75 in

Causes of a bad fresh food door handle can include regular wear and tear, accidental impact, or over-tightening of screws during installation. A damaged handle can hinder the door’s operation and affect the refrigerator's usability.

Symptoms of a bad fresh food door handle include:

• The handle being loose or wobbly
• Cracks or visible damage on the handle
• Difficulty in opening or closing the refrigerator door
• The handle completely detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This machine screw secures refrigerator brackets, panels, and hardware. Its 12-24 thread and integrated hex-washer head provide a snug, vibration-resistant hold to keep components properly mounted and aligned.

• Fastens mounting brackets, covers, and other hardware to the refrigerator cabinet or frame
• Replaces a missing, stripped, or corroded screw to restore a secure attachment
• Helps reduce rattles, vibration, or shifting caused by loose fasteners
• Supports proper fit and alignment of serviced components

• Disconnect power before servicing; wear cut-resistant gloves
• Match thread and length to the original; do not force mismatched hardware
• Start by hand to avoid cross-threading; tighten snugly without overtightening, especially into plastic
• Retain and transfer any spacers or clips from the original hardware

The Door Shelf Bar is an OEM part for GE refrigerators, designed to securely hold items within the door shelves. This bar is responsible for maximizing storage space and keeping items in place, preventing them from falling out when the door is opened or closed. Made from durable materials, the door shelf bar is designed to withstand the regular opening and closing of the refrigerator, as well as the weight of items typically stored in door shelves, such as condiments, bottles, and jars.

This shelf bar measures 23” wide by 2.5” high and 7” deep.  

Symptoms of a failing Door Shelf Bar include:

• The bar becoming loose or detached from the door
• Cracks or breaks in the bar 
• Difficulty fitting the bar back into its slots 

Causes of a bad Door Shelf Bar can range from normal wear and tear, which weakens the bar over time, to accidental damage, such as placing too much weight on the bar or mishandling. Additionally, exposure to extreme temperatures or cleaning chemicals can degrade the material of the bar, leading to brittleness.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Freezer Door Gasket is an OEM part for GE freezers. This gasket plays a crucial role in ensuring an airtight seal around the freezer door, preventing warm air from entering and cold air from escaping.  

Over time, freezer door gaskets can wear out or become damaged due to frequent use, accidental damage, or exposure to extreme temperatures. It is essential to replace the gasket if you notice any of the symptoms mentioned above to ensure your freezer operates efficiently and to avoid unnecessary energy consumption.

Symptoms of a bad Freezer Door Gasket include:

• Visible tears, warps, or gaps in the gasket
• Condensation or frost buildup around the door edges
• Difficulty in maintaining consistent freezer temperatures
• An increase in energy consumption as the freezer works harder to maintain its internal temperature

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Refrigerator Door Gasket is an OEM part for GE refrigerators. This essential component forms a seal around the perimeter of the refrigerator door, ensuring that cold air stays inside and warm air stays out. 

Symptoms of a bad Refrigerator Door Gasket include:

• Noticeable gaps or tears in the gasket that allow air to pass through.
• Condensation or frost buildup around the edge of the door.
• The refrigerator running more frequently than usual, indicating a loss of cooling efficiency.
• Difficulty in keeping the door closed or having it pop open.

Causes of a bad door gasket can include regular wear and tear from opening and closing the door, material degradation over time due to exposure to the elements and cleaning chemicals, or physical damage from accidental pulling or stretching.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: white. It measures about 12 inches wide by 6 inches high.

The Freezer Door Shelf Bar is an OEM part compatible with GE refrigerators. This component serves as a support and retaining bar for the shelves located on the inside of the freezer door, ensuring they remain securely in place. This shelf bar measures 23” wide by 2” high and 5” deep

Symptoms that may indicate the need to replace the freezer door shelf bar include:

• Shelves becoming loose or falling out of the freezer door
• The bar itself becoming cracked, bent, or otherwise damaged

Causes of a faulty freezer door shelf bar can include physical impact or mishandling, excessive weight or force applied to the shelves, or general wear and tear over extended use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This reversible door plug fills the unused mounting hole when you switch the door swing on your refrigerator. It restores a finished appearance and helps keep air and moisture from entering through the opening.

• Covers the unused door hole created during a door swing reversal
• Helps maintain proper sealing and resists drafts/condensation at the opening
• Restores a clean, finished, factory look to the door
• Common symptoms: missing or cracked plug, exposed hole, cosmetic gap on door edge

• Disconnect power before servicing any door components
• Gently pry out the old plug with a plastic trim tool to avoid scratches
• Align the new plug with the opening and press until fully seated and flush
• Verify the door closes properly and the gasket seals evenly

Color: white. Measures about 1/2 an inch wide by 2/3 of an inch high.

The Screw is an OEM replacement part for GE refrigerators. Countless screws are used throughout the refrigerator to securely hold parts in place.

Symptoms of a bad or missing screw can include:

• Rattling or vibration noises coming from inside the appliance 
• Doors or other parts that are no longer properly aligned
• Increased frost or cold air leaks due to compromised seals

Causes may include normal wear and tear over time, accidental damage or loss of a screw during repairs, or improper assembly leaving crucial screws omitted. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators.

This plug button is a small snap-in cap used on refrigerators to cover exposed holes on door handles, liners, or trim. It restores a clean, finished look while helping keep dust and moisture out of the cabinet.

• Snaps into a screw or access hole on a handle, liner, or trim panel
• Covers fasteners and gaps for a clean, finished appearance
• Helps block dirt and moisture from open holes
• Typical symptoms: missing cap, broken or loose plug, visible screw hole or cosmetic gap

• Unplug the appliance before servicing and use caution around sharp edges
• Align the plug with the hole and press straight in by hand until fully seated and flush
• For handle screw holes, tighten fasteners first, then install the cap
• Avoid using metal tools on finished surfaces to prevent scratches