Parts for Ge GTS18KHPVRCC: 01 - Doors Parts

The GE refrigerator water filter is an OEM replacement part responsible for ensuring the quality of the water dispensed on GE Profile top and bottom freezer refrigerators. It is responsible for purifying the water before it reaches your glass or ice maker, providing you with clean and safe drinking water directly from your refrigerator. To maintain optimal water quality and ensure the filter's effectiveness, it is recommended to replace the filter every 6 months or when the rated capacity of 750 gallons is reached.

Over time, the water filter can become clogged with sediment, reducing its effectiveness. Regular use and the accumulation of minerals and contaminants can lead to the need for replacement.

Symptoms of a bad water filter include:

• Reduced water flow from the dispenser
• Ice cubes with an unusual taste or odor
• The filter indicator light staying on
• Visible particles in the water or ice

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. For the best performance, it is recommended to replace the water filter every six months or as indicated by the filter change light on your refrigerator.

This small handle assembly replaces a worn or broken appliance door handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed for fast cosmetic and functional repair. What it does:

• Replaces a damaged or cracked small handle to stop slipping and improve door access
• Restores proper leverage for opening and closing the appliance door
• Matches the original fit and mounting points for a straightforward swap
• Helps eliminate rattling or movement caused by a loose or broken handle

• Basic hand tools typically required;
• Disconnect power and empty the door/drawer before beginning work for safety and easier handling
• Keep mounting screws and trim in a safe place and compare the new part to the old one before installing

This small handle assembly replaces a worn or broken appliance door handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed for fast cosmetic and functional repair. What it does:

• Replaces a damaged or cracked small handle to stop slipping and improve door access
• Restores proper leverage for opening and closing the appliance door
• Matches the original fit and mounting points for a straightforward swap
• Helps eliminate rattling or movement caused by a loose or broken handle

• Basic hand tools typically required;
• Disconnect power and empty the door/drawer before beginning work for safety and easier handling
• Keep mounting screws and trim in a safe place and compare the new part to the old one before installing

The Screw Package is an OEM replacement part for GE refrigerators. It contains a pack of 12 identical screws for miscellaneous securing and assembly needs.

These screws play a supporting role, helping attach shelf tracks, cover panels, door hinges, and other interior parts. By maintaining components securely in place, they help ensure smooth operation and prevent rattling or other noises. 

Symptoms of insufficiently secured parts include:

• Noises heard from loose shelves or door components  
• Detaching handles, hinges, or panels
• Shelves shifting positions or becoming misaligned

Causes of needing replacement screws can include loss, stripping, or wear over time from repeated securement and removal of parts during cleaning or repairs. 

This multipack of GE screws is perfect for minor refrigerator maintenance or to stock up on extras. They are also compatible with replacement hardware from Hotpoint, RCA, and certain Kenmore models. 

This freezer door gasket fits around the door to keep cold air in and moisture out. Replacing a worn or damaged gasket restores proper temperature performance and helps prevent frost and condensation around the freezer opening.

• Creates a tight seal between the freezer door and cabinet
• Helps maintain correct freezer temperature and humidity
• Reduces frost/ice buildup and moisture near the door
• Replaces gaskets that are torn, warped, cracked, shrunken, or not sealing
• Common signs: visible gaps, door not closing fully, frost along the liner, longer run times, or a warming freezer

• Disconnect power; unload items from the freezer door before starting
• Seat the gasket lip evenly into the door channel/retainer all the way around
• Warm the gasket with hot water or a hair dryer on low to help it relax and seal—do not overheat
• Close the door and check for uniform contact; allow time for the gasket to conform

The Gasket Door FF is an OEM part for GE refrigerators. This gasket creates a seal around the door frame of the fresh food compartment, helping to maintain the internal temperature by preventing warm air from entering and cold air from escaping. The white gasket measures approximately 28 x 44 inches.

Causes of a bad door gasket can include regular wear and tear, exposure to temperature fluctuations, or physical damage from repeated opening and closing of the door. A compromised gasket can lead to inefficient cooling and increased energy consumption.

Symptoms of a bad gasket door include:

• Warm spots inside the refrigerator
• Condensation or frost buildup around the door
• The door not closing properly
• Visible cracks, tears, or warping of the gasket

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This flip-up dairy door covers the refrigerator's dairy compartment. Replace a cracked or missing cover to keep butter, cheese, and other small items organized and protected while restoring a clean, finished look to the fresh food door.

• Attaches to the dairy bin on the fresh food door and flips up/down for access
• Helps keep contents contained and protected during door opening/closing
• Restores proper hinge/latch engagement so the bin stays closed
• Common symptoms: cracked cover, broken hinge tabs, loose hinge, or missing door

• Empty the dairy bin and remove the old cover
• Align hinge tabs with the bin's pins and snap into place; no tools typically required
• Handle carefully; if very cold, let the plastic acclimate to room temperature before installation
• Open and close to confirm smooth operation and full seating

This reversible door plug covers the unused hinge or mounting hole after changing a door swing, restoring a clean appearance and helping keep out dirt and drafts. Simple, color-matched replacement for a neat finish. What it does:

• Covers exposed hinge or mounting holes on the door edge for a finished look
• Helps block dust, pests and drafts from entering through unused openings
• Matches original geometry to sit flush with the door surface
• Designed to work with reversible door installations where a hole is no longer used

• One (1) reversible door plug

• No tools are typically required; press plug into the unused hole until it seats securely
• Confirm correct orientation before installing to ensure a flush fit
• Inspect surrounding sealing surfaces and clean area before installation
• If plug is damaged or does not seat properly, replace with the exact part number

The Screw is an OEM replacement part for GE refrigerators. Countless screws are used throughout the refrigerator to securely hold parts in place.

Symptoms of a bad or missing screw can include:

• Rattling or vibration noises coming from inside the appliance 
• Doors or other parts that are no longer properly aligned
• Increased frost or cold air leaks due to compromised seals

Causes may include normal wear and tear over time, accidental damage or loss of a screw during repairs, or improper assembly leaving crucial screws omitted. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators.