Parts for Ge PFSF2MJYFBB: 01 - Doors Parts

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Hex washer head screw secures panels, brackets, and small assemblies inside refrigerators and ranges. Replace stripped, missing, or damaged screws.

Mounting bracket that secures and stabilizes refrigerator panels and assemblies. Replace when the original bracket is broken, cracked, or missing.

Machine screw for refrigerator panels, brackets, and assemblies. Replaces lost, stripped, or damaged fasteners to restore secure fit and stability.

Creates an airtight seal between door and cabinet. Replace if worn, torn, or causing air leaks and frost buildup. Verify fit with your model number.

Creates an airtight seal to keep cold air in and moisture out. Replace when worn, cracked, or loose to restore temperature stability and efficiency.

Color: Black

Color: White

Right-hand cam closure secures your refrigerator freezer door for a proper latch and tight seal. Replace if cracked, broken, or missing to restore door function.

Freezer door cam closure for right-hand side installation. Replace if cam is cracked, broken, or missing to restore proper door alignment and closure.

This cam closure is the left-side closing cam that secures and aligns the freezer door, helping the door latch properly and maintain an even seal to keep the compartment cold. A direct-fit replacement that restores proper door action. What it does:

• Guides and locks the freezer door into the correct closed position
• Helps maintain an even door seal to reduce cold air loss and frost buildup
• Prevents door sagging or misalignment that can keep the door from latching
• Works with the door hinge/latch mechanism to ensure smooth opening and closing

• Disconnect power to the appliance before starting any repair
• Installation may require removing the freezer door or inner door panel; keep fasteners organized
• Handle plastic components carefully to avoid cracking; align cam to hinge before tightening

This cam closure secures the freezer door hinge, helping the door latch properly and maintain a tight seal for consistent cooling. It replaces a worn or broken left-side closure to restore reliable door movement. What it does:

• Acts as the left-s

Replacement mounting screw for refrigerator panels, brackets, door handles, and trim. Needed when original hardware is missing, stripped, or corroded.

Replacement lower bracket that secures the lower assembly in your refrigerator. Needed when original bracket is cracked, broken, or worn causing misalignment.

Secures brackets, panels, and components inside your refrigerator. Replace stripped, rusted, or missing hardware to restore tight alignment and stability.

2 Per Kit

2 Per Kit

Lower freezer basket for GE refrigerators. Installs in the bottom freezer compartment to organize frozen items. Replace if cracked, broken, or worn.

Restores airtight seal on French door refrigerators. Replace when torn or loose to prevent warm air entry and condensation. Verify fit with your model.

Replace worn or torn French door gaskets to restore your refrigerator's seal and energy efficiency. Easy DIY install—soak in hot water first. Confirm fit.

Black door handle assembly for your refrigerator. Replaces broken, cracked, or worn handles. Direct fit replacement part for fresh food compartment.

White refrigerator door handle assembly. Replaces broken, cracked, or worn handles. Mounts to the front of your refrigerator door for opening access.

Stainless steel fastener secures your refrigerator door handle to the door assembly. Replace worn, loose, or missing hardware for solid grip and alignment.

Plastic retaining clip that secures drawer divider modules in place. Replaces broken, cracked, or missing snuggers to restore proper fit and separation.

This plastic thimble fits into the appliance cabinet where the door or dispenser mates with the opening, helping provide a smooth seal and protecting surrounding trim from wear. It restores proper fit and reduces rubbing or chafing. What it does:

• Replaces worn or cracked door thimble that can allow rubbing or misalignment at the door opening
• Guides and cushions the door edge or dispenser as it closes, helping reduce noise and abrasion
• Helps maintain a cleaner seal area by covering damaged or missing trim
• Useful when repair requires restoring proper door fit or preventing further trim damage

• One plastic door thimble as described

• Remove power to the appliance before beginning any repair; follow manufacturer's safety guidance
• Typically installs by snapping into the opening or securing with existing fasteners—inspect surrounding clips or screws for damage
• No special tools usually required, but a flat tool can help remove the old thimble; avoid excessive force to prevent cabinet damage
• If replacement does not correct fit or sealing issues, further inspection of hinges, strikes, or surrounding trim may be needed

Plastic thimble bushing for refrigerator door hinges. Replaces worn, cracked, or missing thimbles that cause door misalignment or loose hinge pins.

Left-hand door closure cam for refrigerators. Installs on the door hinge assembly to control door closure. Replace if cracked, broken, or worn.

Replacement dairy door for refrigerator inner door storage. Restores a sealed compartment for butter and cheese when original is cracked, broken, or missing.

Replaces a cracked, broken, or missing door shelf module in your refrigerator. Restores secure storage space for condiments and beverages on the door.

Door hinge thimble for refrigerator freezer doors. Installs on door hinge pivot points. Replace if cracked, worn, or missing to restore proper alignment.

This thimble door is the molded trim piece that surrounds the refrigerator/freezer door opening, restoring proper fit and finish. It replaces damaged or worn trim to reduce drafts and improve door alignment and appearance. What it does

• Covers an

Lever lock secures your refrigerator door handle assembly. Replaces broken or missing locks that allow handle to loosen or detach from door.

Sheet metal screw secures refrigerator panels, trim, and brackets. Replace missing, stripped, or corroded screws to restore proper fit and assembly.

Fix an unresponsive water or ice dispenser with this refrigerator dispenser touchpad control panel. Restores button functionality and display readout.

Fix a refrigerator door that won't stay closed or latch properly. This latch lever lock secures the door and dispenser for smooth operation.

The Dispenser Shield is an OEM part for GE refrigerators equipped with water and ice dispensers. This shield acts as a protective cover for the dispenser area, preventing accidental spills or debris from entering the internal mechanisms.

Sympto

This paddle dispenser is the front lever used to activate a refrigerator's dispenser—pressing the paddle operates the water or ice dispensing mechanism for convenient, hands-free filling. Designed to restore normal dispenser control and appearance. What it does:

• Serves as the user-accessible lever that signals the dispenser switch to release water or ice
• Replaces a cracked, loose, or worn paddle that doesn't engage the switch reliably
• Helps stop unintended dispensing from a broken or jammed lever
• Restores a secure surface for pressing with a cup or glass

What's included: One paddle dispenser Install notes:

• Disconnect refrigerator power and turn off the water supply before starting
• Typically installs from the dispenser front; some panels or trim may need removal
• Handle plastic parts gently to avoid cracking during installation
• If dispenser still doesn't work after replacement, check the dispenser switch and actuator linkage

Color: Black

The Door Mullion is an OEM part for GE refrigerators. It is a vertical component that separates the fresh food and freezer compartments, while allowing for the seal and closure of the refrigerator doors.

Causes of a bad door mullion may include

Door bumper for French door refrigerators. Cushions and stops door travel. Replace if cracked, missing, or worn to prevent door damage.

Small cushioning bumper for French-door refrigerators. Prevents door rattling and protects against wear. Replace if cracked, missing, or worn out.

Fix unresponsive or malfunctioning refrigerator dispenser controls with this touchpad interface assembly. Restores water and ice dispensing functions.

Refrigerator door stop that secures the door in the open position. Replace if cracked, broken, or missing to prevent door from swinging shut unexpectedly.

10-32 x 5/16 machine-thread screw secures refrigerator panels, trim, and internal brackets. Replaces missing or damaged fasteners to prevent rattles.

Wheel sprocket for refrigerator shelf slide assembly. Needed when the slide mechanism is damaged, worn, or no longer glides smoothly. Ensures proper shelf operation.

Wheel axle sprocket for refrigerator roller assembly. Replaces worn, cracked, or broken axles that cause wheels to detach or not rotate smoothly.