Parts for Ge PFSS2MIXBSS: 01 - Doors Parts

Purifies water before reaching your dispenser and ice maker. Replace every 6 months for clean, safe drinking water. Verify fit with your model number.

Hex washer head screw secures panels, brackets, and small assemblies inside refrigerators and ranges. Replace stripped, missing, or damaged screws.

Mounting bracket that secures and stabilizes refrigerator panels and assemblies. Replace when the original bracket is broken, cracked, or missing.

Machine screw for refrigerator panels, brackets, and assemblies. Replaces lost, stripped, or damaged fasteners to restore secure fit and stability.

Outer door panel assembly for refrigerator freezer section. Replaces cracked, dented, or discolored panels. Includes insulation foam core.

Creates an airtight seal to keep cold air in and moisture out. Replace when worn, cracked, or loose to restore temperature stability and efficiency.

OEM mounting screw secures interior panels, trim, and brackets in your refrigerator. Replace lost, stripped, or worn fasteners to restore fit.

Freezer door cam closure for right-hand side installation. Replaces cracked, broken, or worn cam closures that prevent proper door alignment and sealing.

Replacement mounting screw for refrigerator panels, brackets, door handles, and trim. Needed when original hardware is missing, stripped, or corroded.

Replacement lower bracket that secures the lower assembly in your refrigerator. Needed when original bracket is cracked, broken, or worn causing misalignment.

Secures brackets, panels, and components inside your refrigerator. Replace stripped, rusted, or missing hardware to restore tight alignment and stability.

2 Per Kit

2 Per Kit

Lower freezer basket for GE refrigerators. Installs in the bottom freezer compartment to organize frozen items. Replace if cracked, broken, or worn.

Replace worn or torn French door gaskets to restore your refrigerator's seal and energy efficiency. Easy DIY install—soak in hot water first. Confirm fit.

Replaces a cracked, loose, or broken fresh-food door handle on your refrigerator. Restores secure grip and straight appearance where the original mounts.

This stop door is the replacement dispenser door that covers the ice/water chute and helps control dispensing. It restores proper closure to prevent drips and ice spillover and keeps the dispenser area sealed when idle. What it does

• Replaces the dispenser stop/cover to block the chute when not in use
• Helps prevent water drips and ice from falling into the dispenser well
• Restores a tight closure to reduce cold air loss from the cabinet
• Can resolve symptoms like a stuck or broken dispenser door or visible gaps at the chute

• One stop door

• Disconnect power to the appliance before beginning any service
• Usually installs with a few screws or snap clips; basic hand tools typically required
• Inspect surrounding trim and actuator parts for wear while replacing the door

Plastic retaining clip that secures drawer divider modules in place. Replaces broken, cracked, or missing snuggers to restore proper fit and separation.

Plastic bushing that fits into the refrigerator door hinge assembly. Replace if cracked, worn, or missing to restore proper door alignment and function.

Right-hand cam closure for refrigerator door hinges. Guides door alignment and secure closing. Replace if cracked, broken, or causing door misalignment.

Replacement dairy door for refrigerator inner door storage. Restores a sealed compartment for butter and cheese when original is cracked, broken, or missing.

Replaces a cracked, broken, or missing door shelf module in your refrigerator. Restores secure storage space for condiments and beverages on the door.

Sheet metal screw secures refrigerator panels, trim, and brackets. Replace missing, stripped, or corroded screws to restore proper fit and assembly.

Set screw secures refrigerator door handles in place. Replace if lost, stripped, or missing after repairs. Requires hex wrench for installation.

The Door Mullion is an OEM part for GE refrigerators. It is a vertical component that separates the fresh food and freezer compartments, while allowing for the seal and closure of the refrigerator doors.

Causes of a bad door mullion may include physical damage from impact or mishandling, wear and tear over time, or compatibility issues with the specific refrigerator model.

Symptoms that may indicate a need to replace the door mullion include:

• Air leaks or drafts between the fresh food and freezer compartments
• Difficulty in closing or sealing the refrigerator doors properly
• Visible cracks, breaks, or damage to the mullion itself
• Condensation or frost buildup around the mullion area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

Small cushioning bumper for French-door refrigerators. Prevents door rattling and protects against wear. Replace if cracked, missing, or worn out.

Refrigerator door stop that mounts to the door and catches in the slot to ensure proper door closure. Replace if cracked, broken, or missing.

10-32 x 5/16 machine-thread screw secures refrigerator panels, trim, and internal brackets. Replaces missing or damaged fasteners to prevent rattles.

Wheel sprocket for refrigerator shelf slide assembly. Needed when the slide mechanism is damaged, worn, or no longer glides smoothly. Ensures proper shelf operation.

Wheel axle sprocket for refrigerator roller assembly. Replaces worn, cracked, or broken axles that cause wheels to detach or not rotate smoothly.