Parts for Ge GDE20GGHBRBB: Doors Parts

This bracket support is a small mounting bracket that secures and stabilizes appliance components, helping keep panels and assemblies aligned for proper operation and reduced vibration. It's a direct-fit replacement when the original bracket is broken or missing. What it does

• Provides a sturdy mounting point to hold panels or internal components in place
• Restores proper alignment to doors, panels or assemblies that sit on the bracket
• Reduces rattling or vibration caused by a loose or damaged bracket
• Helps prevent wear or damage from parts shifting during use

• Unplug the appliance and shut off water/gas (if applicable) before starting work
• Use the original mounting screws; replace damaged fasteners as needed
• Handle sharp sheet-metal edges carefully and wear gloves and eye protection

This is a 1/4-20 UNC machine screw used to fasten appliance components securely. It restores proper fit and stability where threaded fasteners are required, preventing loose panels or shifting parts. What it does:

• Secures panels, brackets, or assemblies that use a 1/4-20 UNC threaded hole
• Stops rattling or movement caused by a missing or damaged screw
• Restores correct mechanical connection for safe operation
• Useful when replacing stripped, corroded, or lost fasteners

• Disconnect power to the appliance before servicing.
• Start threads by hand to avoid cross-threading; tighten until snug.
• Do not overtighten — use appropriate torque for the material to avoid stripping threads or damaging parts.
• Ensure proper contact and secure fastening.

Color: Black

A replacement lower right bracket that secures and supports the lower section of the assembly for proper alignment and stable operation. Restores the original mounting point to reduce sagging and movement. What it does:

• Provides a secure mounting point for the appliance's lower assembly so panels, doors or components stay aligned
• Helps prevent sagging, rattling or uneven gaps caused by a damaged or missing bracket
• Maintains correct part-to-frame spacing so connected components operate smoothly
• Fits into the OEM mounting locations and matches factory attachment points

• Disconnect power to the appliance before attempting any repair to avoid shock or injury
• Requires basic hand tools; keep fasteners from the original bracket for reinstallation unless replacements are provided
• Hand-tighten fasteners, then snug to manufacturer torque recommendations—do not overtighten to avoid stripping

This replacement screw secures appliance brackets, panels, and components. It restores a tight, aligned fit when the original hardware is stripped, rusted, or missing, helping reduce vibration and rattling for reliable operation.

• Fastens brackets, panels, or mounts to keep components secure and aligned
• Replaces missing, stripped, or corroded hardware
• Helps reduce vibration, rattling, or loose/misaligned parts
• Matches original spec for reliable hold and fit

• Disconnect power before servicing; use proper PPE
• Match thread and length to the removed screw before installation
• Start threads by hand to prevent cross-threading; tighten until snug—do not overtighten
• Ensure parts are aligned and seating surfaces are clean before tightening

This right-hand replacement slide restores smooth, stable movement for a refrigerator drawer or shelf glide. Designed to support the drawer and keep it aligned for reliable opening and closing. What it does:

• Replaces a worn or broken right-hand drawer/shelf slide to stop sticking or jamming
• Restores proper alignment so the drawer opens and closes evenly
• Reduces rattling or grinding caused by damaged slide hardware
• Helps prevent drawer from falling out or shifting under load

• One right-hand slide

• Remove drawer contents and fully remove drawer before replacing the slide
• Use basic hand tools; keep fasteners and brackets accessible for reassembly
• Inspect the matching left-hand slide and mounting points; replace both if damaged
• If working near electrical components, unplug the appliance before servicing

This refrigerator door gasket creates an airtight seal around the door to help maintain proper internal temperature and energy efficiency. It replaces a worn or damaged seal to reduce air leaks and help prevent frost buildup. What it does:

• Seals the refrigerator door to keep cold air in and warm air out
• Helps maintain consistent internal temperature for food safety
• Reduces frost and moisture buildup caused by leaking seals
• Can improve energy efficiency if original gasket is cracked or deformed

• One door gasket

• High-level replacement: remove the old gasket, position the new gasket into the door channel, and secure per manufacturer guidance
• Inspect the door flange and mounting channel for debris or damage before installing
• Warm the gasket if needed to make it more flexible for proper seating
• Turn off power to the appliance or follow manufacturer safety instructions before starting work

The Fastener Door Handle is an OEM component for GE refrigerators. This door handle provides a comfortable grip for accessing refrigerator shelves and bins. It attaches securely to the refrigerator door through durable metal fasteners. 

Causes for a bad door handle could be cracks, damage, or stripped fastener holes resulting in a loose or detached handle. Regularly gripping and lifting may also cause normal wear over time.

Symptoms of a failing door handle include:

• The handle detaching completely from the door  
• Looseness making the handle wobbly or unstable to hold
• Sharp edges or broken parts posing a safety risk

This OEM GE handle is also compatible with Hotpoint, RCA, and select Kenmore refrigerator models.

This refrigerator shelf module provides a sturdy, level surface for food storage. Replace a cracked, damaged, or missing shelf to restore safe storage space, keep items organized, and ensure the shelf seats securely on the cabinet supports. What it does:

• Creates a flat, stable platform for containers and groceries
• Helps organize the interior by maintaining proper spacing between levels
• Locks into the cabinet rails/supports to stay in position
• Common symptoms: cracked or broken shelf/frame, shelf tilts or sags, won't stay seated, missing shelf

• One shelf module

• Disconnect power before servicing interior components
• Remove food items and any obstacles, then release the old shelf from its supports
• Align and seat the new shelf fully in the correct rails/slots; ensure it is level and secure
• Avoid overloading; verify placement per your model's cabinet diagram

This set screw secures refrigerator components—most commonly door handles—to their mounting studs. Replacing a missing or stripped screw restores a solid, secure feel and helps prevent loose or wobbly handles.

• Locks the handle to its mounting stud to keep it tight and secure
• Helps resolve a loose, wobbly, sliding, or rattling handle
• Replaces a missing, rounded, or damaged set screw
• Helps maintain proper handle alignment and consistent door operation

• Unplug the appliance or switch off power before servicing
• Ensure the handle is fully seated on the studs before tightening
• Start the screw by hand to avoid cross-threading; then tighten until snug
• Do not overtighten to prevent stripping the screw or handle threads

A replacement Phillips flat-head screw sized 10-14 x 3/4 inch for appliance assembly and panel fastening. Replaces worn or missing fastening hardware to keep panels, brackets, and components secure and aligned. What it does:

• Secures panels, trim, brackets, and internal components where a 10-14 x 3/4" Phillips flat-head screw is required.
• Restores proper fit and prevents rattling, vibration, or gaps caused by missing or stripped screws.
• Provides a direct hardware match for repairs calling for this screw size and head style.

• Disconnect power to the appliance before starting any repair work.
• Use the correct size Phillips screwdriver to avoid stripping the screw head.
• Tighten until snug; avoid over-tightening which can strip threads or crack panels.
• Replace any corroded or damaged mating hardware to ensure a secure fit.