Parts for Ge GTE21GTHCBB: Doors Parts

This door gasket forms an airtight seal around the freezer door, keeping cold air in and warm, humid air out. Replace a torn, warped, or compressed gasket to restore proper sealing, reduce frost, and maintain consistent freezer temperatures.

• Seals the freezer door to the cabinet to contain cold air and block warm, moist air
• Helps reduce frost/ice buildup and temperature swings
• Can address issues like visible gaps, tears, hardening/warping, condensation around the door, or the door popping open
• A worn gasket may cause longer run times and difficulty maintaining set temperatures

• Disconnect power before starting
• Remove the old gasket; depending on the model, it presses into a channel or is held by retainer screws
• Warm the new gasket (warm water or low heat) to relax folds, then seat it evenly all the way around
• Close the door and check for uniform contact; adjust seating/retainers to eliminate gaps

This door handle fastener secures the refrigerator's handle to its mounting points, keeping it tight and aligned. Replace a stripped or missing fastener to restore a solid, safe grip when opening and closing the door.

• Secures the handle to the door's mounting studs or brackets
• Helps prevent handle wobble, sagging, and misalignment
• Replaces broken, stripped, or missing hardware
• Common symptoms: loose or wobbly handle, handle pulls off, or handle won't stay tight

• Disconnect power to the refrigerator before servicing
• Protect the door finish and support the handle during removal
• Remove the handle per your model's instructions, replace the fastener at the mounting point, and reattach the handle
• Tighten hardware until snug; do not overtighten

This refrigerator door gasket in Dorian Gray creates a tight seal between the door and cabinet to keep cold air in and humidity out. Replace a warped, torn, or leaky gasket to restore proper cooling performance and reduce frost and moisture problems.

• Seals the door perimeter to maintain temperature and energy efficiency
• Helps prevent condensation, frost buildup, and warm spots near the door
• Replaces gaskets that are cracked, deformed, or no longer sealing
• Common symptoms: visible gaps, door won't close smoothly, moisture/ice around the door, longer run times

• Disconnect power and clear the door area before starting
• Warm the new gasket with hot water or low heat to improve flexibility; do not overheat
• Press the retainer lip fully into the door channel, working evenly around corners
• Close the door and check for uniform contact; adjust hinges/strike as needed and allow the gasket to set

This fixed freezer shelf provides a stable storage surface designed to replace a worn or broken freezer shelf, restoring organization and safe stacking for frozen foods. Fits into existing shelf supports for a straightforward swap. What it does:

• Replaces a damaged or missing fixed freezer shelf to restore storage capacity and organization
• Provides a stable surface to prevent items from falling or blocking vents
• Helps keep frozen items separated for easier access and inventory
• Works with existing shelf supports and slides into place when aligned correctly

• Remove food and packaging from the area before replacing the shelf
• Power disconnect is recommended as a general safety precaution before servicing appliances
• Align shelf with existing supports and carefully lower into place until fully seated
• If the shelf is glass, handle with care and wear gloves to reduce breakage risk

Restore a sturdy, level storage surface in your refrigerator's main compartment with this fresh food fixed shelf. Replace a cracked, broken, or missing shelf to regain intended capacity and keep items organized in the fresh food section.

• Provides a solid, level surface in the fresh food compartment
• Replaces a cracked, shattered, or missing shelf
• Addresses issues like broken frame tabs or a shelf that won't sit level
• Helps prevent items from tipping and restores proper spacing

• Disconnect power and remove food from the area before replacing the shelf
• Slide out the damaged shelf and carefully position the new shelf into the mounting slots
• Ensure the shelf is fully seated on its supports before loading items
• Handle carefully; use two hands and avoid sudden temperature changes

The Fresh Food Fixed Shelf is an OEM part for GE refrigerators. This door shelf is designed to fit within the fresh food section of your GE refrigerator, providing additional storage space for various food items. It offers a convenient place to store bottles, jars, and other items, keeping them easily accessible and organized.

A bad door shelf can occur due to wear and tear, accidental damage, or other factors. If you notice symptoms such as cracks, warping, or the shelf not attaching securely to the refrigerator door, it may be time to replace the door shelf.

Symptoms of a bad door shelf include:

• Cracks or damage
• Warping
• Shelf not attaching securely to the refrigerator door

Restore organization in your GE refrigerator by replacing the faulty door shelf with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Handle Assembly is an OEM component specifically designed for GE refrigerator doors. It includes the handle, mounting bracket, and all necessary attachment hardware.

This assembly provides the primary grip location for easy door access. Its precisely designed fitment streamlines installation while maintaining structural integrity. 

Over many years of frequent opening and closing cycles, normal wear can cause issues like:

• Loose handles that detach easily from the door 
• Brackets that have bent or become misshapen
• Missing or damaged fasteners

Proper handle attachment is crucial for door stability and safety. Loss of grip could potentially lead to unwanted opening incidents.

Symptoms of a bad handle assembly include looseness, difficulty opening the door, and an unsecured feel during use. 

This authentic GE replacement restores the factory-grade assembly with all required components. Customers appreciate its straightforward installation without fuss. It ensures a structurally sound and dependable door handle for years to come.
 

Badge assembly that restores the exterior nameplate on compatible refrigerators, returning factory appearance and clear appliance identification. Ideal for replacing faded, cracked or missing emblems for a like-new finish. What it does:

• Restores the appliance's exterior identification and cosmetic finish where the original emblem is faded, cracked, or missing.
• Covers the mounting area and provides the finished look customers expect from the door surface.
• Matches factory styling so the appliance maintains a consistent, OEM appearance.
• Useful whenever visible badge damage detracts from the refrigerator's appearance.

• High-level surface-mount part—inspect the door surface and remove any old adhesive or residue before installing.
• Alignment is important; position carefully and press firmly to engage any snap-in tabs or adhesive backing.
• No electrical disconnection is typically required for exterior cosmetic badges, but avoid prying behind panels that expose wiring or components.

Replacement dairy bin assembly for refrigerator door. Restores enclosed door storage to keep butter, cheese and other small items organized and contained, preventing spills and making everyday access easier. What it does:

• Replaces a cracked, broken or worn door dairy bin to restore proper storage and containment for small food items.
• Mounts to the refrigerator door shelf to secure butter, cheese and other small items so they don't fall or shift during use.
• Helps eliminate common symptoms like loose or missing door storage, items falling from the door shelf, or a chipped/ruined dairy bin.

• Remove food and any adjustable door shelves before replacing the bin to avoid spills or damage.
• Align the bin with the door shelf rails and seat it until fully engaged; some models snap or slide into place.
• Inspect door shelf rails and catches for damage and clean mounting surfaces before installing.