Parts for Ge GTE21GTHCBB: Shelves & Drawers Parts

This chrome-plated freezer wire shelf replaces a damaged or missing shelf to restore storage capacity and keep frozen items organized. It provides a sturdy, ventilated surface that promotes cold-air circulation for even cooling. What it does:

• Supports frozen foods and containers on the freezer compartment
• Restores proper shelf spacing and usable storage area after a bent or broken shelf
• Wire design allows frost and air circulation to reduce cold spots
• Fits into existing shelf tracks or supports for secure placement

• One chrome-plated freezer wire shelf

• Slide shelf into existing tracks or rest on factory shelf supports; no special tools typically required
• Check that shelf is fully seated and level before loading items
• Handle with care to avoid scratching the finish; wear gloves if needed
• Replace supports before installing the shelf

This replacement shelf endcap secures and supports a refrigerator shelf edge to keep shelves seated and stable. It restores a worn or broken shelf corner so food stays level and the shelf stays in place. What it does:

• Replaces a cracked, broken, or missing shelf endcap that lets a shelf tilt or shift
• Anchors the shelf edge to the shelf track or frame for proper alignment
• Prevents shelf movement that can cause items to slide or fall
• Matches OEM fit to restore original shelf stability and function

• One shelf endcap

• Remove food and the affected shelf before starting; reinstall shelf after part is secure
• Typically snaps or clips into place—no special tools required, but use care to avoid cracking adjacent trim
• If plastic is brittle, wear gloves and eye protection when removing broken pieces
• Verify correct orientation before pressing fully into position

The Snack Pan Rail is an OEM replacement part for GE refrigerators. It is designed to secure and support the snack pan or deli drawer in your refrigerator, providing a storage solution for your favorite snacks and deli items.

A bad snack pan rail can occur due to factors such as wear and tear, damage, or misalignment. If you notice symptoms such as a loose or broken rail, difficulty in sliding the snack pan, or an unstable or sagging drawer, it may indicate a faulty or malfunctioning snack pan rail.

Symptoms of a bad snack pan rail include:

• Loose or broken rail
• Difficulty in sliding the snack pan
• Unstable or sagging drawer

Restore your refrigerator's snack pan or deli drawer by replacing the faulty rail with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Snack pan rail (Left) is an OEM part for GE refrigerators. It sits inside the fresh food compartment and provides a shelf area along the left wall for convenient storage of smaller items like drinks, condiments, and snack foods.

Causes of a bad rail can be normal wear and tear over time from repeated loading/unloading of items. Exposure to sharp edges or heavy/imbalanced items may also damage plastic components. 

Symptoms of a bad Snack pan rail (Left) include:

• Sagging or inability to fully support the weight of items placed on it
• Broken or cracked plastic parts that cause gaps or instability  
• Failure to securely stay attached to refrigerator side wall mounting points

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This slide humidity veg pan is the replacement humidity-control slider for the refrigerator crisper/vegetable drawer. It restores adjustable venting so you can better manage moisture for stored produce. What it does:

• Replaces a broken or missing humidity-control slider that opens and closes the crisper vent
• Allows you to adjust airflow to help reduce excess moisture or retain humidity for fruits and vegetables
• Stops noisy or jammed drawer operation caused by a damaged slider
• Helps the drawer seal and slide smoothly when the control is intact

• One humidity-control slide for the vegetable/crisper drawer

• Removal typically requires pulling out the crisper drawer and sliding the old control off the track; no special tools usually needed
• Align the new slide on the vent track and snap it into place, confirming smooth movement across its full range
• Inspect surrounding tabs and tracks for damage—replace the drawer or trim if needed for proper fit
• Always follow the refrigerator manufacturer's service instructions and disconnect power if recommended for your model

The Veg Pan is an OEM part for GE refrigerators. It provides designated storage for fruits and vegetables to extend their freshness. Positioned optimally to receive airflow, the veg pan helps keep produce crisp. 

Causes of a bad pan include cracks or leaks from years of use, and discoloration resulting in odors transferred to other stored items.  

Symptoms of a failing veg pan include:

• Mold or premature spoilage forming inside the pan
• Difficulty removing or replacing produce due to cracks
• Stains or odors affecting other foods from leaked fluids

Note: Right Side

This OEM GE replacement restores a dedicated crisper to help fruit and veggies last. It also fits Hotpoint, RCA, and compatible Kenmore models for years of reliable performance. 

The VEG PAN LH is an OEM part for GE refrigerators. As the name suggests, it is a vegetable pan located on the left side of the fresh food compartment. This pan provides a dedicated storage space for fruits and vegetables to extend their freshness.

Causes of a bad vegetable pan can include cracks or breaks from the repeated impact of added/removed produce, worn plastic parts that allow for leaking/mingling of moisture, or a warped shape preventing proper drainage and organization.

Symptoms of a failing vegetable pan include: 

• Fruit/veggie juices and moisture leaking into other areas of the refrigerator 
• Odors and premature spoilage transferred to other stored items
• Difficulty removing or replacing produce due to poor fit of the pan

Note: Left Side

It is also compatible with Hotpoint, RCA and select Kenmore side-by-side refrigerator models.
 

The Vegetable Crisper Cover Assembly is an OEM component specifically designed for GE refrigerators. Installed in the refrigerator door, it provides an enclosed storage compartment with humidity control for maintaining the freshness of vegetables and other produce.

Causes of a bad crisper cover can include normal wear and tear leading to cracked seals or broken hinges over time. Exposure to moisture may cause condensation buildup.

Symptoms of a failing crisper cover assembly include:

• Damaged or loose hinges impairing proper closing/sealing  
• Brittle cracking or missing sections of the cover panels
• Excess moisture and inability to adequately control humidity

Replacing with this genuine GE assembly restores optimal storage. Compatible with GE side-by-side models, its enclosed design keeps produce fresher longer per GE's quality standards. This OEM replacement cover is also compatible with Hotpoint, RCA, and Kenmore fridges for convenient veggie storage.