Parts for Ge GTS18FSLCSS: Doors Parts

This badge is the small decorative nameplate used on the appliance exterior to display the manufacturer's emblem. It restores factory appearance and covers the original mounting location for a clean, finished look. What it does

• Replaces a damaged, faded, or missing exterior emblem to restore the appliance's original look
• Snaps or adheres into the existing badge location for a factory-correct appearance
• Helps identify the appliance visually without affecting function
• Common symptom: missing, scratched, or peeled badge on the appliance front

• One replacement badge/nameplate (exact fit for the listed part number)

• Installation is typically simple: align badge with mounting location and press into place; adhesive backing or snap clips may be used depending on model
• Clean mounting surface before installing to ensure good adhesion
• Use gentle pressure; avoid sharp tools that could scratch the finish
• If clips break during removal, replace clips only if explicitly listed as included

This reversible door plug is a small trim cap that fills the unused holes on a refrigerator door after changing the door swing. It restores a clean, finished look and helps keep dust and moisture out.

• Covers unused hinge/handle screw holes created during a door reversal
• Press-fit cap designed to match lighter gray door trim
• Helps maintain appearance and reduce entry of dirt and moisture
• Replace if missing, cracked, discolored, or won't stay seated

• Disconnect power if removing or repositioning the door/hinges
• Use your model's parts diagram to confirm the plug location and color
• Align with the hole and press in by hand until flush with the surface
• Do not force; verify correct part if the plug will not seat properly

The Stainless Steel Handle Set is an OEM replacement part for GE refrigerators. This comprehensive set includes both the refrigerator and freezer door handles, along with the necessary mounting hardware for a complete installation.

Symptoms of a bad Stainless Steel Handle Set include:

• Handles becoming loose or detached
• Difficulty in opening the refrigerator or freezer doors
• Visible wear, tarnish, or damage to the handles affects aesthetics and grip

Causes for a malfunctioning Stainless Steel Handle Set can include wear and tear from frequent use, mechanical issues with the attachment points, or environmental factors that affect the material's integrity.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This fresh food door gasket replaces the worn seal around the refrigerator's fresh-food compartment door to restore an airtight seal, helping keep cold air in and reduce warm-air leaks that can cause frost or spoilage. What it does:

• Replaces torn, cracked, or deformed door gasket to restore proper door sealing.
• Helps prevent warm, moist air from entering the fresh-food compartment, which can lead to frost build-up and uneven cooling.
• Restores consistent compartment temperature for better food preservation and appliance performance.
• Can reduce strain from frequent compressor cycling caused by a failing door seal.

• Disconnect power to the appliance before beginning any service to avoid electrical shock.
• Remove the old gasket and clean the door channel of debris or adhesive before installing the new gasket.
• Start installation at a top corner and press the gasket firmly into the channel; warming the gasket slightly (hot water or low-heat hair dryer) can improve flexibility for easier seating.
• After installing, check the door alignment and seal at multiple points; allow time for the gasket to fully seat before judging fit.

This freezer door gasket creates a tight seal around the freezer door to help maintain cold temperatures and reduce frost buildup. Replacing a damaged gasket restores proper sealing and helps the freezer run efficiently. What it does:

• Seals the freezer door to keep cold air in and warm air out
• Helps reduce frost buildup and moisture inside the freezer
• Restores proper cooling when a cracked, torn, or deformed gasket is the cause
• Can improve energy efficiency by preventing air leaks

• Disconnect power to the appliance before starting any repair
• Remove the old gasket and clean the gasket channel and mating surfaces before installing
• Gasket requires gentle warming or careful stretching to seat; avoid excessive force
• Use non-marring tools and follow OEM instructions for any fasteners or retainer strips

The Door Rack is an OEM replacement part for GE refrigerators. It is designed to fit on the refrigerator door, providing storage space for bottles, jars, and other items.

A bad door rack can occur due to wear and tear, accidental damage, or misalignment. If you notice symptoms such as a cracked or broken rack, difficulty in storing items on the door, or items falling off the rack, it may indicate a need to replace the door shelf.

Signs of a faulty door rack include:

• Cracked or broken rack
• Difficulty in storing items on the door
• Items falling off the rack

Restore your refrigerator's door by replacing the faulty door rack with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This dairy bin cover replaces the removable lid that protects and separates dairy items in the refrigerator compartment, helping keep cheeses, butter and other dairy fresher and organized. Fits the dedicated dairy/covered bin area. What it does:

• Replaces a cracked, warped or missing dairy bin lid to restore a sealed cover for the dairy compartment
• Helps contain odors and protects dairy items from spills and cross-contamination
• Maintains proper placement and stacking of small dairy containers on the shelf
• Compatible with the refrigerator's dairy bin track and snaps into place when aligned

• Remove the old cover by lifting and sliding it out of the dairy bin track; align new cover and snap into place
• Handle with care to avoid cracking the plastic; do not force if resistance is felt
• Clean surfaces and remove food before installing; dishwasher use not recommended
• If fit is tight or hardware is damaged, inspect the dairy bin housing for wear before forcing installation

This shelf door half is a molded freezer door bin that restores storage and containment for small frozen items. The durable white finish replaces a cracked or missing half door to help organize freezer shelves. What it does:

• Replaces a broken or warped freezer door half so items stay contained on the shelf
• Restores a flush door seal area and prevents small items from falling out
• Matches factory-fit mounting points for proper alignment and operation
• Helps maintain neat shelf organization and easier access to stored food

• Unplug or disconnect power to the appliance before servicing
• Empty and remove items from the affected shelf area before installing
• Typically snaps or slides into existing mounting rails; may require gentle pressure to seat
• Keep original fasteners; if hardware is missing, a parts list for replacement fasteners

The Handle Mount is an OEM component specifically designed for GE French door refrigerators. It serves as the attachment point for refrigerator door handles.

The handle mount connects the handle assembly securely to the refrigerator door itself. Its sturdy construction manages stress from frequent usage while allowing for smooth operation.

Symptoms of a bad handle mount include:

• Loose, unstable, or detached door handles
• Handles difficult-to-operate or open doors with  
• Visible bending, cracks, or damage to the mount
• Reduced grip strength or door control

Causes can involve normal wear over extended periods, imprecise impacts, or repeated stress from heavy handling exceeding the mount’s limits. 

Replace with this genuine GE OEM part to restore a tight, lasting connection between handles and doors. Compatible also with Hotpoint, RCA, and Kenmore French door refrigerator models.
 

A small plastic thimble that fits behind a push-style control button to hold it squarely in the housing and restore smooth button travel. Replaces a worn or missing retainer to improve button feel and alignment. What it does:

• Secures push-style control buttons in the panel to stop wobble or uneven movement
• Restores proper button travel so controls depress and release cleanly
• Helps keep the button centered in its bezel for consistent operation
• Addresses symptoms like buttons that fall out, sit crooked, or don't return smoothly

• Disconnect power to the appliance before beginning any repair
• Remove the knob or access the control panel per your model's service instructions
• Press the thimble into the button housing until it snaps or seats fully; then reinstall the button/knob

A small plastic thimble that fits behind a push-style control button to hold it squarely in the housing and restore smooth button travel. Replaces a worn or missing retainer to improve button feel and alignment. What it does:

• Secures push-style control buttons in the panel to stop wobble or uneven movement
• Restores proper button travel so controls depress and release cleanly
• Helps keep the button centered in its bezel for consistent operation
• Addresses symptoms like buttons that fall out, sit crooked, or don't return smoothly

• Disconnect power to the appliance before beginning any repair
• Remove the knob or access the control panel per your model's service instructions
• Press the thimble into the button housing until it snaps or seats fully; then reinstall the button/knob

This is a #8 x 9/16" pan head Phillips screw used to fasten trim, panels, and small components on compatible appliances. It replaces lost or damaged mounting screws to restore secure fittings and proper alignment. What it does:

• Secures plastic trim, panels, and brackets to appliance housings
• Provides a flush, rounded head for a clean finished appearance
• Phillips drive allows easy installation with common screwdrivers
• Resists loosening under normal appliance vibration

• Use the correct-size Phillips driver to avoid stripping the head
• Thread the screw in straight and tighten until snug; avoid over-tightening
• Replace any corroded or damaged screws to maintain secure attachments
• Disconnect power to the appliance before accessing internal components

This right-side refrigerator door corner cap in Dorian Gray replaces a cracked or missing trim piece to restore the door's finished appearance and help protect the edge from damage. Easy cosmetic replacement for worn or broken corners. What it does:

• Covers and protects the upper right corner of the refrigerator door, preventing exposure of the door edge
• Restores a clean, finished look after chips, cracks, or impact damage
• Helps keep the door gasket seating area visually intact by replacing damaged trim
• Matches Dorian Gray finish to blend with the existing door color

• One (1) right-side door corner cap in Dorian Gray, as shown

• High-level replacement: remove any damaged cap, snap or fasten the new cap into place; retain screws/clips if present
• Use basic hand tools (screwdriver, trim tool) and avoid excessive force when seating the cap
• Power off and empty nearby shelves if removing the door or hinge hardware for access

This left-corner refrigerator door cap restores the finished edge and appearance of the door in Dorian Gray. It covers the corner, protects the trim, and keeps the door looking neat after damage or wear. What it does:

• Replaces a cracked, chipped, or missing left corner trim piece to improve appearance
• Protects the door edge from further damage and hides exposed screw holes or rough edges
• Helps maintain a smooth seal area by preserving the outer trim profile
• Matches the Dorian Gray finish for consistent cosmetic restoration

• One left door corner cap (Dorian Gray)

• High-level snap-on/fasten replacement; may require removing nearby trim or loosening hinge hardware for access
• Use care to align tabs before pressing to avoid breaking clips
• Follow manufacturer instructions for disassembly; unplug the appliance or turn off power when working near electrical components