Parts for Ge XUF17SMRDWW: Doors Parts

This door gasket seals the washer door to keep water and suds inside the wash tub, helping prevent leaks and maintain proper wash performance. It replaces a torn, stretched, or hardened door seal. What it does:

• Creates a watertight seal between the door and wash tub to stop leaks during cycles
• Helps prevent water damage to flooring and surrounding cabinets
• Reduces odor buildup by sealing the tub and limiting moisture escape
• Restores proper door closure if the original gasket is warped or deteriorated

• One replacement door gasket

• Disconnect power and water supply before removing the old gasket
• Inspect the door and tub rim for debris or damage before installing the new gasket
• Follow OEM instructions for proper alignment and seating; improper installation can cause leaks

The User Interface Control Board and Panel is an OEM replacement part for GE freezers. It is responsible for providing a user-friendly interface that allows you to easily set and adjust the temperature settings of your freezer. It allows you to conveniently monitor and control the temperature inside your freezer, ensuring your food stays fresh and frozen.

A bad user interface control board and panel can occur due to electrical issues, component failure, or damage to the panel or buttons. If you notice symptoms such as the display not lighting up, unresponsive buttons, or incorrect temperature readings, it may indicate a need to replace the control board and panel.

Symptoms of a bad user interface control board and panel include:

• Display not lighting up
• Unresponsive buttons
• Incorrect temperature readings

Restore your freezer by replacing the faulty user interface control board and panel with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Fastener Door Handle is an OEM component specifically designed for GE refrigerators. It securely attaches the refrigerator door handle in place.

Located on the exterior refrigerator door, this fastener provides the mounting point for the handle through a sturdy mechanical connection. Proper fastening of the handle is necessary for its smooth operation and to withstand regular opening/closing.

Causes of a failed fastener can include wear and tear from years of use or stripped threads due to over-tightening.

Symptoms include:

• Loose, unstable, or detached door handle
• Difficulty opening/closing the refrigerator door
• Visible damage or corrosion of fastener head/threads

This genuine OEM GE replacement ensures the handle remains reliably affixed during normal operation. Compatible alternatives include select Hotpoint, RCA, or Kenmore.

The Freezer Door Handle is an OEM part for GE refrigerators. This door handle is designed to provide a sturdy and reliable way to open your freezer door. It allows you to effortlessly open and close the freezer door, providing a comfortable grip for everyday use.

A bad freezer door handle can occur due to wear and tear, accidental damage, or other factors. If you notice symptoms such as a loose or broken handle, difficulty in opening or closing the freezer door, or an unsightly appearance, it may be time to replace the handle.

Symptoms of a bad freezer door handle include:

• Loose or broken handle
• Difficulty in opening or closing the freezer door
• Scratched or worn-out appearance

Restore the function of your GE freezer by replacing the faulty door handle with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fastening to reduce vibration and keep parts aligned for safe, reliable operation. What it does:

• Secures panels, trim, brackets or internal components to prevent loosening
• Helps stop rattling, vibration, or misalignment caused by missing or worn fasteners
• Replaces stripped or corroded screws to maintain safe assembly
• Works wherever the matching screw size and thread are required

• Turn slowly to avoid cross-threading; use the correct screwdriver or bit
• Do not overtighten—tighten until snug and parts are properly seated
• Disconnect power and follow appliance safety guidance when accessing internal components

This door full bin is the removable shelf that snaps into the refrigerator door. Replace a cracked, loose, or missing bin to restore secure, organized door storage for bottles, jars, and condiments.

• Provides a stable storage shelf on the door for bottles, jars, and condiments
• Restores usable door capacity and organization
• Replace if cracked, warped, or if tabs are broken and the bin won't stay seated
• Helps prevent items from tipping or falling when the door opens/closes

• Disconnect power before servicing and wear gloves to avoid injury from sharp or brittle edges
• Remove the old bin; align the new bin with the door rails/slots and press down until fully seated
• Allow plastic to reach room temperature before installation to reduce risk of cracking

The Key Set is an OEM part for GE refrigerators that includes the necessary keys to unlock and secure your refrigerator door. 

A bad key set can be caused by misplacement, loss, or damage to the keys themselves. If you find yourself unable to access certain compartments or features because of a missing or damaged key, it may be time to replace the key set.

Symptoms of a bad key set include:

• Inability to unlock or lock 
• Keys that are bent, broken, or no longer fit into the locks
• Keys that have been misplaced or lost

Replace your missing or damaged key set with this genuine OEM part to regain control over your refrigerator. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

A replacement badge nameplate that restores the exterior appearance of your appliance by covering the brand/name area. Keeps the unit looking finished and professional after repairs or panel replacement. What it does

• Replaces a missing, cracked or faded nameplate badge to restore the appliance's exterior appearance.
• Provides the visible brand/name emblem usually mounted on the control panel or door.
• Helps hide mounting holes or blemishes left from previous badge removal.
• Common symptom: visible missing or damaged emblem that affects the appliance's look.

• Inspect the old badge to determine if clips, screws or adhesive secure the replacement; transfer any reusable fasteners.
• Clean the mounting surface before installing to ensure good adhesion or clip engagement.
• Use appropriate hand tools; avoid forcing tabs or clips to prevent panel damage.