Parts for Ge ZIP360NHA: Doors Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This bracket and bumper assembly secures and cushions the refrigerator door hinge to keep the door aligned and closing smoothly. It replaces worn or broken hinge hardware to restore proper door fit and reduce closing noise. What it does:

• Supports the door hinge mounting and keeps the hinge correctly positioned
• Provides a rubber bumper surface to prevent metal-on-metal contact and absorb impact
• Helps maintain door alignment and an even gap for a proper seal
• Commonly used when the door hangs unevenly, binds, or makes noise while closing

• One bracket and bumper assembly

• Disconnect power to the appliance before starting any work
• Support the door while removing hinge fasteners to prevent the door from shifting or falling
• Use basic hand tools; remove any trim or shelves only if they obstruct access
• After installation, check door alignment and adjust as needed

Size: 10-32 GXTT FLP.595 S

This replacement door gasket seals the refrigerator door to help maintain proper temperature and reduce moisture buildup. It restores a tight seal so your fridge runs more efficiently and keeps food fresher. What it does:

• Creates an airtight seal around the door to help prevent cold air loss and reduce energy waste
• Helps stop warm air and moisture from entering the compartment, limiting frost and condensation
• Reduces temperature swings that can cause food spoilage
• Addresses common symptoms like warm interior temperatures, excess frost build-up, or a door that feels drafty

• One replacement door gasket

• Designed for direct replacement; inspect the door frame and mounting channel before installing
• Clean the gasket channel and let adhesives or sealer dry fully if previously used
• Seat the gasket evenly around the door, checking for gaps; warm the gasket slightly if needed to aid fit
• Always unplug the appliance or disconnect power before servicing

This replacement fresh-food door gasket seals the refrigerator compartment to help keep cool air in and reduce energy loss. Restores an airtight seal so the refrigerator maintains proper temperature and efficiency. What it does:

• Replaces a worn, cracked or torn fresh-food door seal that lets warm air in
• Helps stop condensation and frost buildup around the door edge
• Reduces excessive compressor run time caused by leaking seals
• Restores proper door closure and consistent internal temperatures

• One fresh-food door gasket

• Inspect door frame and magnetic strip for damage before installing the new gasket
• Clean mounting surface and allow to dry for best adhesion and fit
• Seat the gasket evenly around the door, working corners last; trim only if manufacturer documentation explicitly permits
• Disconnect power or follow appliance safety instructions if removing interior door components

This foam-filled freezer door panel provides the insulated inner surface that helps maintain cold temperatures and supports interior components. It replaces a damaged or worn inner door to help reduce frost buildup and improve cooling efficiency. What it does:

• Replaces the freezer's insulated inner door panel to restore proper insulation and structural support.
• Helps reduce temperature loss and potential frost accumulation when the outer door closes correctly.
• Supports door-mounted bins and shelves that attach to the inner panel.
• Common symptoms addressed: visible damage to the inner panel, soft or deformed door surface, or increased frost inside the freezer compartment.

• Disconnect power to the appliance before beginning any repair to avoid electrical shock.
• Installation typically requires removing the outer door trim and fastening hardware; handle the panel carefully to avoid damaging the foam core or mounting tabs.
• Inspect door gaskets and mounting hardware during replacement; replace any damaged components to ensure a proper seal.

The Freezer Drawer Gasket is an OEM replacement part for GE refrigerators. It serves as a critical seal between the freezer drawer and the refrigerator cabinet, preventing cold air from escaping and warm air from entering the freezer compartment.

Symptoms of a need to replace the freezer drawer gasket:

• Frost buildup or condensation inside the freezer compartment
• Difficulty opening or closing the freezer drawer due to a poor seal
• Visible gaps, cracks, or damage to the gasket material
• Gasket feeling brittle or not sealing properly when the drawer is closed

Causes of a faulty freezer drawer gasket can include general wear and tear over time, exposure to extreme temperatures, damage from mishandling or improper cleaning, and loss of flexibility or brittleness of the material.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This top left freezer door trim replaces the damaged or worn decorative trim on the upper edge of the freezer door, restoring a clean finished look and proper edge fit. Ideal for maintaining door appearance and seal alignment. What it does

• Covers and protects the top outer edge of the freezer door from dings and wear.
• Helps maintain correct door alignment and keeps the door edge flush with the cabinet.
• Restores the appliance's finished appearance after damage or cosmetic wear.
• Compatible with left-hand freezer door installations (top position).

• Disconnect power to the appliance before attempting any repair.
• Remove door hardware and existing trim carefully to avoid scratching the door finish.
• Reinstall trim using factory screws/clips; retain original fasteners unless replacements are specified.
• If the door doesn't close properly after install, recheck alignment and fastener tightness.

This replacement freezer door handle trim restores the finished appearance of the freezer door and covers the handle fastening area for a clean, cohesive look. It helps maintain proper grip aesthetics and protects mounting hardware from dirt. What it does:

• Replaces cracked, faded or broken freezer handle trim to improve door appearance
• Covers and protects the handle mounting area from debris and wear
• Restores a smooth, finished surface where the handle meets the door
• Helps maintain user confidence when opening and closing the freezer

• High-level, homeowner-friendly replacement; typically requires basic hand tools
• Follow OEM disassembly order: remove handle or trim fasteners before installing the new trim
• Keep removed screws and fasteners organized for reassembly