Parts for HA10TG31SS: Doors Parts

This small machine bolt secures internal panels and components in compatible appliances, restoring proper fit and reducing vibration or rattling. Use it to replace a stripped, missing, or damaged fastener for a solid, reliable connection. What it does:

• Fastens panels, brackets, and small assemblies to maintain alignment and structural support
• Stops loose parts that cause vibration, rattling, or misalignment
• Replaces corroded, stripped, or missing bolts to restore secure connections
• Works where a 2.9 mm shaft diameter and ~9.5 mm length bolt is specified

• One bolt (ST 2.9 x 9.5 mm)

• Use the correct screwdriver or driver bit and apply moderate torque to avoid stripping the head
• Disconnect power and follow appliance safety guidelines before accessing internal components
• If other fasteners show wear, consider replacing them together for consistent fit

This door gasket seals the freezer compartment to help maintain consistent cold temperatures and improve efficiency. It replaces a worn, torn, or misshapen gasket to reduce air leaks and help the appliance cool properly. What it does:

• Forms an airtight seal around the freezer door to help keep cold air in and warm air out
• Helps reduce frost buildup and keeps stored food at proper temperatures
• Restores proper door closure when the original gasket is cracked, warped, or split
• Supports efficient compressor cycling by minimizing unnecessary run time

• One door gasket (color: black)

• Inspect the door flange for damage and clean the mounting surface before installation
• Remove the old gasket carefully; warm water may help soften adhesive or clips if present
• Align the new gasket and press into the channel evenly; some gaskets require screws or clips
• Unplug the appliance or turn off power before working on door components and avoid sharp tools that could damage the gasket

The Freezer Door Gasket is an OEM replacement part for GE refrigerators responsible for creating an airtight seal around the freezer door, keeping the cold air inside and maintaining the set temperature and preserving the freshness of your frozen items.

A bad freezer door gasket can occur due to wear and tear over time or damage caused by mishandling. If you notice symptoms such as frost buildup inside the freezer, the door not closing properly, or increased energy consumption, it may indicate a need to replace the gasket.

Symptoms of a bad freezer door gasket include:

• Frost accumulation inside the freezer
• Warm spots or uneven cooling in the freezer
• Excessive energy consumption

Restore your refrigerator by replacing the faulty freezer door gasket with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This fixed half shelf restores usable storage space inside the refrigerator by providing a stable, low-profile surface for small items and containers. It replaces a missing, cracked, or damaged half-width shelf to help keep food organized. What it does:

• Replaces a broken, cracked, or missing half-width shelf so items no longer slide or fall through
• Provides a stable surface for jars, bottles, and small containers in the fresh-food compartment
• Maintains original shelf layout and storage spacing without modifying the cabinet
• Works with the existing shelf supports and rails for a secure fit

• Empty the shelf area and remove all contents before installing
• Install into existing shelf supports; do not force or bend supports
• Wear gloves if the shelf is glass and handle carefully to avoid chips or breakage
• If mounting hardware or supports are damaged, replace those parts before installing the shelf

This fixed half-width shelf replaces the lower fresh-food shelf in compatible refrigerators to restore usable storage space and keep items stable. Durable design supports food containers and helps organize the compartment. What it does:

• Replaces a broken, cracked or missing lower fresh-food shelf
• Restores a level, secure surface for storing small containers and produce
• Prevents items from slipping into drawers or blocking vents
• Helps maintain organized shelving and proper airflow in the compartment

• Install by sliding into the existing shelf tracks or seating into shelf supports; no tools typically required.
• Handle carefully to avoid chipping; inspect supports for damage and replace if worn.
• Disconnect power only if removing nearby interior lighting or electrical components; otherwise no electrical work is required.

This lower fresh-food door bottle rack secures bottles and tall containers on the refrigerator door, helping keep items organized and preventing tipping or breakage. It restores proper storage where a shelf or rack is cracked, loose, or missing. What it does:

• Provides a stable ledge to hold bottles, cartons and tall containers on the lower fresh-food door
• Replaces broken, cracked or warped door racks that allow items to tilt or fall
• Snaps or mounts into the door trim to restore original storage capacity
• Fits the lower position specifically; use for items that need upright support

• One lower fresh-food door bottle rack

• Unplug the appliance or disconnect power before starting any door work to reduce electrical hazards
• Remove damaged rack and align new rack with the door mounts; press until it snaps or seats fully
• Do not force parts; check for proper engagement and even seating before loading with heavy items
• Handle glass containers carefully during installation and initial use

This is a stainless-steel freezer door assembly that replaces a damaged or dented outer door on compatible refrigerators. Restores a proper seal and the appliance's finished appearance while keeping cold air inside. What it does:

• Replaces the outer freezer door to restore proper closing and insulation
• Helps stop common symptoms like visible dents, chipped finish, or difficulty closing
• Restores the door's trim and mounting points so handles and hinges align correctly
• Returns the exterior appearance to match stainless-steel panels

• Intended for technicians or experienced DIYers; may require door removal, hinge support, and alignment
• Keep power disconnected and empty/remove contents from the door area before starting
• Use appropriate tools and follow OEM torque and alignment specifications to avoid damage

This left-hand stop door is a direct-fit replacement that helps the refrigerator door stop, align and close properly. It restores secure door positioning and prevents over-travel for reliable operation. What it does:

• Replaces the left-hand door stop that limits door movement and holds the door in the correct position
• Prevents over-travel that can cause misalignment, rubbing or incomplete door closure
• Commonly replaced when the stop is cracked, broken or missing and the door wobbles or won't stay closed
• Matches OEM shape and mounting points for proper fit on compatible GE refrigerators

What's included:

• One left-hand stop door (black)

Install notes:

• Disconnect power and remove food from the door area before starting work
• Typically secures with clips or screws; use appropriate hand tools and avoid over-tightening
• Inspect surrounding hinge and mounting area for damage and replace if needed
• Handle plastic parts carefully to avoid cracking during installation