Parts for Hot Point HTR16BBEMRCC: Doors Parts

The Door Shelf Bar is an OEM part for GE refrigerators, designed to securely hold items within the door shelves. This bar is responsible for maximizing storage space and keeping items in place, preventing them from falling out when the door is opened or closed. Made from durable materials, the door shelf bar is designed to withstand the regular opening and closing of the refrigerator, as well as the weight of items typically stored in door shelves, such as condiments, bottles, and jars.

This shelf bar measures 23” wide by 2.5” high and 7” deep.  

Symptoms of a failing Door Shelf Bar include:

• The bar becoming loose or detached from the door
• Cracks or breaks in the bar 
• Difficulty fitting the bar back into its slots 

Causes of a bad Door Shelf Bar can range from normal wear and tear, which weakens the bar over time, to accidental damage, such as placing too much weight on the bar or mishandling. Additionally, exposure to extreme temperatures or cleaning chemicals can degrade the material of the bar, leading to brittleness.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Freezer Door Gasket is an OEM part for GE freezers. This gasket plays a crucial role in ensuring an airtight seal around the freezer door, preventing warm air from entering and cold air from escaping.  

Over time, freezer door gaskets can wear out or become damaged due to frequent use, accidental damage, or exposure to extreme temperatures. It is essential to replace the gasket if you notice any of the symptoms mentioned above to ensure your freezer operates efficiently and to avoid unnecessary energy consumption.

Symptoms of a bad Freezer Door Gasket include:

• Visible tears, warps, or gaps in the gasket
• Condensation or frost buildup around the door edges
• Difficulty in maintaining consistent freezer temperatures
• An increase in energy consumption as the freezer works harder to maintain its internal temperature

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Refrigerator Door Gasket is an OEM part for GE refrigerators. This essential component forms a seal around the perimeter of the refrigerator door, ensuring that cold air stays inside and warm air stays out. 

Symptoms of a bad Refrigerator Door Gasket include:

• Noticeable gaps or tears in the gasket that allow air to pass through.
• Condensation or frost buildup around the edge of the door.
• The refrigerator running more frequently than usual, indicating a loss of cooling efficiency.
• Difficulty in keeping the door closed or having it pop open.

Causes of a bad door gasket can include regular wear and tear from opening and closing the door, material degradation over time due to exposure to the elements and cleaning chemicals, or physical damage from accidental pulling or stretching.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: white. It measures about 12 inches wide by 6 inches high.

The Freezer Door Shelf Bar is an OEM part compatible with GE refrigerators. This component serves as a support and retaining bar for the shelves located on the inside of the freezer door, ensuring they remain securely in place. This shelf bar measures 23” wide by 2” high and 5” deep

Symptoms that may indicate the need to replace the freezer door shelf bar include:

• Shelves becoming loose or falling out of the freezer door
• The bar itself becoming cracked, bent, or otherwise damaged

Causes of a faulty freezer door shelf bar can include physical impact or mishandling, excessive weight or force applied to the shelves, or general wear and tear over extended use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This reversible door plug fills the unused mounting hole when you switch the door swing on your refrigerator. It restores a finished appearance and helps keep air and moisture from entering through the opening.

• Covers the unused door hole created during a door swing reversal
• Helps maintain proper sealing and resists drafts/condensation at the opening
• Restores a clean, finished, factory look to the door
• Common symptoms: missing or cracked plug, exposed hole, cosmetic gap on door edge

• Disconnect power before servicing any door components
• Gently pry out the old plug with a plastic trim tool to avoid scratches
• Align the new plug with the opening and press until fully seated and flush
• Verify the door closes properly and the gasket seals evenly

This machine screw secures refrigerator brackets, panels, and hardware. Its 12-24 thread and integrated hex-washer head provide a snug, vibration-resistant hold to keep components properly mounted and aligned.

• Fastens mounting brackets, covers, and other hardware to the refrigerator cabinet or frame
• Replaces a missing, stripped, or corroded screw to restore a secure attachment
• Helps reduce rattles, vibration, or shifting caused by loose fasteners
• Supports proper fit and alignment of serviced components

• Disconnect power before servicing; wear cut-resistant gloves
• Match thread and length to the original; do not force mismatched hardware
• Start by hand to avoid cross-threading; tighten snugly without overtightening, especially into plastic
• Retain and transfer any spacers or clips from the original hardware

This plug button thimble is a small insulating part that supports and protects a push button or plug terminal, helping maintain a secure electrical connection and preventing wear or arcing. It restores proper button fit and function. What it does:

• Cushions and centers a push button or plug terminal for smooth operation
• Provides electrical insulation to reduce risk of shorting or arcing
• Helps keep the button/plug securely seated to prevent intermittent contact
• Commonly replaced when buttons wobble, stick, or have poor electrical connection

• Disconnect power to the appliance before attempting any repair.
• Replacement typically requires removing the control panel or button assembly; handle plastic parts carefully to avoid cracking.
• Verify orientation and seating before reassembling to ensure proper button movement.