Parts for Kenmore 253.9366011 (2539366011, 253 9366011): Doors Parts

Color: White

The Freezer Door Gasket is an OEM part for Frigidaire refrigerators. This gasket creates a seal around the freezer door to prevent warm air from entering and cold air from escaping, ensuring the freezer maintains its optimal temperature.

Causes of a bad freezer door gasket can include wear and tear over time, exposure to harsh cleaning chemicals that degrade the material, or physical damage from frequent use or mishandling.

Symptoms of a bad freezer door gasket include:

• Noticeable gaps or cracks in the gasket
• Frost buildup inside the freezer
• Increased energy consumption
• The freezer door not closing properly

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Refrigerator Gasket is an OEM replacement part for Frigidaire models. It provides a sealing barrier around the door frame, preserving cool air inside the refrigerator compartment. Composed of durable synthetic materials, the contoured gasket creates an insulating shield.

Causes of a faulty gasket include cracks or breaks from over-closure of the refrigerator door. Deterioration from extended exposure to temperature extremes can also impact integrity over time.

Symptoms of a bad refrigerator gasket include: 

• Inability to maintain a consistent internal cooling temperature
• Accumulation of moisture or frost at door edges  
• Visible gaps allowing warm external air to infiltrate
• Air leaks around the refrigerator opening

Compatible models include brands produced by Electrolux, Gibson, and Kelvinator.

The Door Shelf Bar is an OEM part for Frigidaire refrigerators. It is designed to secure items on the refrigerator door, providing additional storage space and helping to keep items organized and easily accessible. The sturdy construction ensures that it can hold bottles, jars, and other items securely. It measures approximately 31 inches in length. 

You should replace the door shelf bar if it becomes damaged or worn out. Common causes include regular use, accidental impacts, or the weight of heavy items over time, which can cause the bar to crack or break.

Symptoms of a bad door shelf bar include:

• Items falling from the door shelf
• Visible cracks or breaks in the bar
• Difficulty keeping items securely in place
• The bar not fitting properly or staying attached

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Shelf Support is an OEM part for Frigidaire refrigerators, designed to hold and support the shelves on the inside of the refrigerator door. This part ensures that door shelves are securely mounted, providing stable storage for bottles, condiments, and other items.  

Symptoms of a failing Door Shelf Support include:

• Shelves becoming loose or sagging
• Difficulty in keeping items securely on the door shelves
• Cracks or breaks in the support

Causes of a bad Door Shelf Support can range from normal wear and tear, to accidental damage, such as overloading the door shelves with too much weight or impact from moving items in and out. Over time, the stress of weight and use can lead to the supports becoming damaged. 

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Door Shelf Support is an OEM part for Frigidaire refrigerators. It serves as a critical component in the refrigerator's door, providing support for the shelves that hold various items like bottles, jars, and other containers. This support measures approximately 2 1/2" tall x 1 1/2" deep. 

Causes of a bad door shelf support can include cracking due to overloading, material fatigue from regular use, or accidental damage. When the supports weaken or break, it affects the structural integrity of the door storage, leading to potential spills or damaged goods.

Symptoms of a bad Door Shelf Support include:

• Shelves leaning or sagging noticeably
• Difficulty in fitting the shelf into the door
• Cracks visible in the support
• Shelves falling off or failing to hold items securely

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Color: White

This replacement screw secures appliance components so brackets, shelves, trim, or panels stay firmly in place. Install a new screw when the original is missing, stripped, or corroded to restore a tight, rattle-free fit.

• Fastens brackets, panels, trim, or covers to the cabinet or liner
• Helps maintain alignment and reduce vibration and noise
• Direct replacement for a missing, rusted, or stripped fastener
• Use wherever your model's parts diagram specifies this screw

• Disconnect power before servicing; shut off water if working near water lines
• Match thread and length to the original location as shown in your model's parts diagram
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening (especially into plastic)
• Retain and transfer any original spacers or clips used with this fastener

This service data sheet provides the factory service and diagnostic information technicians use to troubleshoot and repair appliances. It includes key wiring, calibration, and specification details so repairs are accurate and faster. What it does:

• Summarizes system wiring, component locations, and electrical ratings for reference during service
• Lists control settings, diagnostic codes, and test points to help identify failures
• Clarifies manufacturer-recommended adjustments and calibration values
• Supports correct part selection and verification of symptom causes

• For technician use only; read entire sheet before beginning repair
• Keep sheet dry and with the appliance or service records for future reference
• Follow all safety precautions and disconnect power before testing or servicing
• Use the sheet alongside the appliance's official service manual and wiring diagrams

Size: Approximate 2.5 inches thick, 33 inches wide and 70 inches long.

The Frigidaire Touch-Up Paint is white in color in a .6 fl oz bottle. For almond order 5303321320. For black order 5303321321.

The Touch Up Paint is an OEM part for Frigidaire appliances. Whether you're dealing with scratches, chips, or other minor cosmetic damage, this touch-up paint provides an easy and effective solution for maintaining the appearance of your appliance. It's designed to adhere well to metal surfaces, offering durability and resistance to further wear and tear.

Over time, appliances can accumulate minor surface damage from regular use, cleaning, and accidental impacts. Using the Touch Up Paint not only improves the aesthetic appeal of your appliance but also helps protect exposed areas from rust and corrosion, which can extend the life of the appliance.

Symptoms of needing Touch Up Paint include:

• Visible scratches or chips on the appliance's surface.
• Areas of rust or corrosion that need to be covered after treating the rust.
• The desire to maintain or improve the appliance's appearance for aesthetic reasons or to maintain its value.