Parts for Craftsman 917378040: Drive Control / Wheels Parts

This genuine Husqvarna replacement part is a zinc coated drive belt for use with rear wheel drive lawn mowers. It is also called a mower belt, ground drive belt, or V belt.A properly functioning drive belt is essential for the safe and reliable use of a lawn mower. The drive belt works to drive the transmission, which in turn allows the mower wheels to turn. The drive belt may become worn out or damaged due to extended use, requiring a replacement. Remember to check the drive belt periodically to spot any wear or damage. This part is an identical replacement for a drive belt that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. Please note: original part number 532406557 is now obsolete, and manufacturer has replaced the original part number with this part.

This is a transmission that is intended for use with lawnmowers. A transmission rotates the axle to drive the wheels so that the lawnmower can move. The drive cable component pushes the transmission forward so that it engages the drive belt and spins the transmission pulley when the operator pulls the drive lever up. A new transmission may be needed if the transmission is locked up or if it won't drive the wheels when it is engaged. If, upon visual inspection, it is determined that the transmission is cracked, broken, or damaged in any way, it will need to be replaced if it is affecting the performance of the lawnmower unit. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This transmission is a genuine OEM Husqvarna part. It is sold individually. This particular transmission is compatible with lawnmowers that are manufactured by Husqvarna and Jonsered.

This replacement part is a pulley drive assembly. This is a genuine replacement part made by Husqvarna. Pulley drive assemblies are commonly found in different types of lawnmowers and are able to establish a connection between certain parts. These parts are then able to work together to ensure that everything is working properly. A new pulley drive assembly might be needed if the current one is damaged or not operating properly. Due to the nature of the pulley's job, it can easily become worn down over time and need to be replaced. If the user hears unusual noises coming from inside the engine it can be due to a pulley. Be sure the engine is shut down before replacing this part. This pulley drive assembly is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This is a replacement height adjuster assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a faulty or damaged height adjuster assembly on a variety of different lawnmower models. This height adjuster fits onto the right-hand side of the lawnmower's deck. This part allows the mower deck to be easily maneuvered to the desired height. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools are required to replace this part, including a wrench. For more accurate information on how and where to install this height adjuster assembly, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this height adjuster is suitable for use on several different lawnmower models manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a genuine OEM left front wheel adjuster kit that is sourced directly from the manufacturer. It is designed for use on lawn mowers and lawn tractors. The front wheel adjuster is responsible for the cutting height of the blades. The part is moved up or down to set the height for the desired lawn length. Over time, the part may become worn and will need to be replaced. If the wheel will not turn or the cutting pattern is not level, the wheel adjuster could be the cause. If the adjuster doesn't engage, it will need to be replaced.A nut driver and screwdriver are required to remove and replace this part. Removal and replacement is a relatively simple task that takes less than half an hour. Remove the spark plug before working on the machine to prevent accidental powering. Remove the old unit and install the new one. This kit is the left side front wheel adjuster. The right side wheel adjuster is sold separately. This left front wheel adjuster kit is made of metal; it is sold as a pre-assembled individual unit. This left front wheel adjuster kit is compatible with lawn tractors and lawnmowers manufactured by Craftsman, Husqvarna, and Poulan.

A lawnmower, weed whacker, or trimmer is exposed to a lot of flying debris, and this puts many parts at risk of becoming clogged with grass and other materials. This cover is designed to prevent any debris from reaching the interior of the wheel or the axle. If a large amount of grass or clippings accumulate inside of the assembly, the machine will be almost impossible to move forward - whether self-propelled or manually operated. This cover prevents that from occurring and simply kicks it back in the direction it came. It does take a lot of wear and tear. Installing it is extremely easy and requires little more than a wrench. Even if the cover is aged, or broken, it will remove easily and take minutes to replace. Expect to replace this at least once over the average lifespan of a trimmer. This works with Husqvarna, Poulan, Craftsman, Ariens, Weed Eater, Jonsered, and Murray makes and models. It is a genuine OEM part sold individually.

This spring is a genuine Husqvarna part, sold individually. This spring can be used as a replacement part in a lawn mower. This part secures various internal components while allowing for some flexibility in placement. The spring in a lawn mower might have to be replaced if it can no longer secure internal components.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This genuine Husqvarna idler pulley can be used as a replacement part for lawn mowers. The function of an idler pulley for a lawn mower is to steer the drive belt and maintain its overall position through tension as the lawn mower is in operation. An idler pulley can be subject to damage from long-term usage, exposure to the elements, or direct impact collisions that can warp the component beyond its ability to continue to function. Symptoms of damage can include frequent belt slippage, engine stalling, and engine overheating. If these symptoms can be directly attributed to a broken or malfunctioning idler pulley, the part should be immediately removed and replaced with this genuine OEM replacement part before using the lawn mower again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This idler pulley is compatible with Husqvarna brand lawn mowers.