Parts for Poulan PR1742STD: Drive Parts

This part is a replacement brake return spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective brake return spring return in a variety of lawn tractor models.The brake return spring allows the brake itself to release. This part attaches to the brake lever and is essential for the safe use of the lawn tractor. Springs such as this one will need to be replaced when stretched, snapped, corroded, or no longer effective. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this brake return spring, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this brake return spring is suitable for use on lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This is a genuine OEM replacement drive V-belt for a riding lawn mower. The drive V-belt attaches to the drive pulley and transfers rotational motion from the transmission to the mower blade. This causes the blade to then spin and cut grass. By using a belt to transfer motion, the engine does not have to work as hard to spin multiple parts, meaning that it runs more efficiently. Drive V-belts are made of a rubber composite material that will begin to fray and stretch over time. Due to continuous motion, these belts absorb a lot of wear and tear, and if left for too long, they can eventually snap and leave the mower blade non-functional. Therefore, it is wise to check the condition of a V-belt during regular maintenance. As soon as it appears to be wearing away, replace it with a new part using a nut driver and screwdriver. When detaching the lower deck, be sure not to lose the bolt clips, as they are required for reassembly. As a high-quality replacement part, this drive V-belt is directly sourced from its original manufacturer. It is compatible with riding lawn mowers made by Husqvarna, Poulan, Craftsman, and Jonsered. This part ships individually.

This replacement part is a belt keeper, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Belt keepers are an important part in many different types of lawn mowers. This part ensures that the belt inside the device is attached and held in place properly. A new belt keeper might be needed if the current one is becoming loose or slipping off. If the user is unable to tighten the belt keeper, it should be replaced immediately. It is possible that the screws become stripped overtime and the belt keeper is unable to stay steady. This can cause the belt to be out of place and can ruin the overall performance of the device. This part is sold individually. This is a genuine OEM replacement part sourced directly from the manufacturer. Be sure the engine is powered off before replacing the belt keeper.

This spring is a torsion spring. It is a genuine Husqvarna part. It is a replacement part for lawn mowers, lawn tractors, and riding mowers. On these machines, the torsion spring is part of the pivot bracket. It helps keep the shift rod in the right position.The torsion spring also creates tension and torque. Without it, the mower will not operate correctly. Before starting this repair, be sure the engine is completely cool and disconnect the spark plug to prevent accidental starting.This spring or torsion spring is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is designed to be compatible with equipment made by Husqvarna, Poulan, Weed Eater, and Craftsman. It also replaces obsolete part number 123782X.

This torque strap is a genuine Husqvarna part, sold individually. This torque strap can be used as a replacement part in a lawn mower. The purpose of the torque strap, otherwise known as a torque bracket, in a lawn mower is to support and stablize the engine so that it does not move side to side when the appliance is in operation.The torque strap could be subject to damage that would necessitate a complete removal and replacement if the component can no longer protect and stabilize the mower's engine. This could occur if the torque strap has been compromised or damaged from general wear and tear over long-term use or as the result of a direct impact collision with a hard object such as a rock or a curb. It is a simple replacement process that will require only basic tools.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This torque strap is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Murray, and Ariens.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.