Parts for Mtd 41DDZ45C799: Drive Shaft / Handle / Shield Parts

This replacement part is an air filter. This is a genuine replacement part made by MTD. This filter is able to ensure that the air coming in and out of the machine is free of dust and other debris. This part is able to keep the engine safe and allows it to run smoothly. A new air filter might be needed if the current one is damaged or too dirty to clean. If the current part does not filter air properly, it might be best to replace it. If not up to working standard, the filter can cause the engine to become damaged if too much dust or debris gets inside. Be sure that the engine is completely shut down before replacing this part. This part is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This replacement part is cutting line. It is a genuine replacement part made by MTD. This part is used in lawnmowers to ensure clean, even cuts during use. Cutting line might be needed if the user desires a more professional look when cutting grass. This line is used to create lines so the user may follow the pattern while working. Be sure to purchase enough of the cutting line to ensure it fits the entire yard. Be sure to find other resources on how to use the cutting line prior to putting it to use. This cutting line is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

This replacement part is a shoulder strap. This is a genuine replacement part made by MTD. This specific shoulder strap is typically found on edgers or grass trimmers. This enables the user to work more effectively and allows for the weight to be dispersed more evenly when maneuvering the appliance. A new shoulder strap might be needed if the current one is missing or damaged in any way. This could include being worn down or torn due to regular wear and tear over time. If the shoulder strap has become too loose and is unable to be tightened, it is recommended that it be replaced. This is a fairly simple repair and should only take a few minutes. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part which ensures proper fit.

The On/Off Switch is an OEM part for MTD outdoor power equipment. This switch is a crucial component for the safe operation of various types of lawn and garden equipment, including lawn mowers, snow blowers, and other powered tools. 

Causes of damage to the On/Off Switch often involve wear and tear from regular use, exposure to harsh outdoor conditions that can corrode or damage electrical components, or accidental impacts that can physically damage the switch.

Symptoms of a bad On/Off Switch include:

• The equipment failing to start
• The machine not stopping when the switch is turned to the off position
• Intermittent power or erratic starting and stopping

This OEM replacement part can be used on trimmers from Craftsman, Yard-Man, Cub Cadet, Bolens, Ryobi, Huskee, Troy-Bilt, MTD, Murray, and Yard Machines.

This replacement part is a throttle trigger. This is a genuine replacement part made by MTD. This part is responsible for allowing the user to move the throttle and adjust the settings as needed. A new throttle trigger might be needed if the current one is damaged at all. This can be due to normal wear and tear after years of use. If the throttle trigger is no longer allowing the engine to be controlled, it is recommended that it be replaced as soon as possible. Refer to the proper user manual for more information on how to replace and repair this part. Work gloves are also recommended the prevent injury. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is an accessory hanger that is intended for use with a variety of lawn and garden equipment. It attaches to equipment so the tool can be hung up for storage. The hanger can help to ensure that tools are easy to access in an out of the way space.The hanger that is currently on the machine could be damaged or could crack after a lot of use, and it might need to be replaced. It is an easy replacement and should only take a matter of minutes at most.This hanger can be used with trimmers, edgers, pruners, blowers, and cultivators from Ryobi, Troy-Bilt, MTD, and Cub Cadet. Each hanger is sold individually. Owners with multiple pieces of equipment will want to buy as many as needed. This is a genuine OEM part sourced from the manufacturer.

This replacement part is a bolt. This is a genuine replacement part made by MTD. Bolts are small but important to the overall workings of the machine. They work with other parts such as screws and nuts to ensure that certain pieces are held in place and are secure during use. A new bolt might be needed if the current one has become loose, is missing, or has been damaged in any way. If the bolt had been dented, bent, or logged in place, be sure to replace it as soon as possible. This should be a fairly simple repair and only require common household tools such as a screwdriver and pliers. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This MTD link assembly is available individually as an individual component. The click link assembly fastens to the front of the mower and connects it to the mower's body. This setup keeps the deck from dragging the ground during mowing. When the click link assembly malfunctions, the front of the mower will drag the ground and create resistance. A dragging deck can make it nearly impossible to mow, and the deck could become jammed and damage the mower. The deck may begin shaking or rattling severely from excessive movement before the piece breaks completely. Replacing the click link assembly means the fuel tank must be removed. Use care when removing the tank. After completing the fuel tank removal, locate the click link assembly and remove the link pin with a pair of pliers. Next, remove the suspension arm on the frame and deck. Put the new link through the suspension arm and repeat these steps in reverse.This part is a genuine OEM product and is sourced from the original manufacturer. This part is compatible with Remington, Columbia, and MTD brands.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement in lawnmowers, snowblowers, string trimmers, pole pruners, and pole saws. The purpose of a screw in these devices is to affix and fasten components to one another through the process of rotation and piercing through the materials. A screw might have to be replaced in the standard lifespan of an outdoor appliance if it is lost, misplaced, or damaged. Check for punctures, tears, loosening, warping, or corrosion to the metal. This damage can stem from general wear and tear or from direct impact with a falling object or a surface. It can warp the component beyond repair, in which case it must be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, Murray, and Yard Man.