Parts for Mtd 41EDZ24C799: Drive Shaft / Shield / Handle Parts

This replacement part is cutting line. It is a genuine replacement part made by MTD. This part is used in lawnmowers to ensure clean, even cuts during use. Cutting line might be needed if the user desires a more professional look when cutting grass. This line is used to create lines so the user may follow the pattern while working. Be sure to purchase enough of the cutting line to ensure it fits the entire yard. Be sure to find other resources on how to use the cutting line prior to putting it to use. This cutting line is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

The On/Off Switch is an OEM part for MTD outdoor power equipment. This switch is a crucial component for the safe operation of various types of lawn and garden equipment, including lawn mowers, snow blowers, and other powered tools. 

Causes of damage to the On/Off Switch often involve wear and tear from regular use, exposure to harsh outdoor conditions that can corrode or damage electrical components, or accidental impacts that can physically damage the switch.

Symptoms of a bad On/Off Switch include:

• The equipment failing to start
• The machine not stopping when the switch is turned to the off position
• Intermittent power or erratic starting and stopping

This OEM replacement part can be used on trimmers from Craftsman, Yard-Man, Cub Cadet, Bolens, Ryobi, Huskee, Troy-Bilt, MTD, Murray, and Yard Machines.

This replacement part is a throttle trigger. This is a genuine replacement part made by MTD. This part is responsible for allowing the user to move the throttle and adjust the settings as needed. A new throttle trigger might be needed if the current one is damaged at all. This can be due to normal wear and tear after years of use. If the throttle trigger is no longer allowing the engine to be controlled, it is recommended that it be replaced as soon as possible. Refer to the proper user manual for more information on how to replace and repair this part. Work gloves are also recommended the prevent injury. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is an accessory hanger that is intended for use with a variety of lawn and garden equipment. It attaches to equipment so the tool can be hung up for storage. The hanger can help to ensure that tools are easy to access in an out of the way space.The hanger that is currently on the machine could be damaged or could crack after a lot of use, and it might need to be replaced. It is an easy replacement and should only take a matter of minutes at most.This hanger can be used with trimmers, edgers, pruners, blowers, and cultivators from Ryobi, Troy-Bilt, MTD, and Cub Cadet. Each hanger is sold individually. Owners with multiple pieces of equipment will want to buy as many as needed. This is a genuine OEM part sourced from the manufacturer.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement in lawnmowers, snowblowers, string trimmers, pole pruners, and pole saws. The purpose of a screw in these devices is to affix and fasten components to one another through the process of rotation and piercing through the materials. A screw might have to be replaced in the standard lifespan of an outdoor appliance if it is lost, misplaced, or damaged. Check for punctures, tears, loosening, warping, or corrosion to the metal. This damage can stem from general wear and tear or from direct impact with a falling object or a surface. It can warp the component beyond repair, in which case it must be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, Murray, and Yard Man.

This lower boom assembly is a genuine MTD part, sold individually. This lower boom assembly can be used as a replacement part for a string trimmer. The purpose of the lower boom assembly for a string trimmer is to fasten, secure, and maintain the placement of the gearbox as it is affixed to the appliance.The lower boom assembly of a string trimmer might eventually have to be replaced within the lifespan of the appliance if it can no longer securely hold the gearbox in place. If the component loosens over time and cannot be repaired, if the component suffers from general wear and tear from long-term use, or if the component is struck by a hard object such as a rock or a curb, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This lower boom assembly is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, and Craftsman.

A lower flexible drive shaft is located inside lawn trimmer attachments. It is mounted inside the lower boom housing. The function of the part is to drive the trimmer head. The drive shaft will deteriorate and become more round with use. The rounded ends will ultimately fail to engage the trimmer head. The lower flexible drive shaft may also break or kink. The trimmer head stops quickly when this occurs. The trimmer will no longer function properly, and a replacement part is required.When replacing the lower flexible drive shaft in a trimmer, wear protective gloves. Start by removing the trimmer head, reel, and line assembly. Use a screwdriver to remove the outer head. Remove the guard assembly. Remove the bushing housing assembly. Access the lower flexible drive shaft and remove the damaged part. Lubricate the new part and install it with the lower flexible drive shaft's ring closest to the trimmer head. Reassemble the trimmer.This replacement part is an OEM genuine part supplied by the manufacturer. The lower flexible drive shaft can be used in MTD, Cub Cadet, Troy-Bilt, and Craftsman brand lawn trimmers. The part is sold individually. The lower flexible drive shaft is made of durable materials.

The guard assembly on trimmers is a safety feature that should not be removed and should be replaced if it is missing. The guard has several important functions on the trimmer. The guard prevents debris and trimmings from flying back on the operator. The trimmer guard also controls the amount of trimmer line out, which helps maintain engine life. If the guard is missing, the engine is put under more stress. Lastly, the guard cuts the line when necessary. If the guard is damaged, it should be replaced to extend the life of the trimmer engine and protect the operator. Remove the spark plug before replacing the guard assembly. Wear work gloves when working on the trimmer. Turn the trimmer over and locate the screws holding it in place. Remove the screws and take the guard off the trimmer. Install the new guard with the screws from the original guard and reinstall the spark plug. This guard assembly is an authentic OEM part that is sourced directly from the manufacturer for use on trimmers manufactured by Craftsman and MTD. It is a black molded plastic part that is sold individually. It does not come with screws.

This genuine part is a MTD line trimmer cutting head assembly. The cutting head assembly attaches to the drive shaft and houses the cutting line. The line trimmer head is one of the most important parts of the line trimmer and is required for the trimmer to function properly. If a line trimmer is performing inefficiently, the main cause is often a worn out line trimmer head. For uninterrupted lawn care maintenance, it is recommended to have a backup for the currently installed line trimmer head. This part is an identical replacement for a line head assembly that is damaged, faulty, or missing. This line trimmer head is fully assembled, but is made up of several parts. For a complete list of included parts and installation instructions, please refer to the original manual. For safety, always wear gloves and ensure unit is powered down prior to performing installation or repair.This is an OEM replacement part sourced directly from the manufacturer and sold individually. It is compatible with MTD and Craftsman brand line trimmers. It is also compatible with line trimmers requiring part 75308689, but please note that this part may differ in appearance.