Parts for Mtd 12ABW35T799: Drive & Upper Handles / Console Parts

This part is a replacement hex bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current hex bolt is broken, stripped, or in any way damaged, this part can be used as a replacement. It is intended for use with outdoor power equipment.Hex bolts are named because of their hexagon shape and are a standard piece of hardware with different uses. Bolts are essential for securing parts of the equipment together properly and should be replaced if corroded, stripped, lost, or otherwise defective. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this hex bolt, the appropriate owner's manual and equipment diagrams should be referred to. This hex bolt is suitable for use on outdoor power equipment manufactured by Craftsman, MTD, Troy-Bilt, Cub Cadet, and Yard Man. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This replacement part is a screw. This is a genuine replacement part made by MTD. Screws are small but important to the overall workings of many appliances. Screws work with other small pieces such as nuts and washers to keep parts secure during use.A new screw might be needed if the current one is missing or damaged. This can be caused by normal wear and tear with years of use. Screws endure large amounts of friction over time and can become worn down. If this is the case, be sure the replace the part as it might not be as effective as normal. Refer to the user manual for specific directions on the replacement of this part. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This replacement curved hd. screw is also known as a carriage bolt. The screw can be used on many types of lawn and garden equipment. The purpose of the screw is to hold and support the upper and lower handles of the machine. It works along with the hand knob to help secure the handles, but buyers should know that the knob is sold separately. Owners might need to replace the carriage bolt if it has become corroded or no longer properly secures the handles. If the owner has lost the bolt, they will need to buy a new one before they can use their machine. The replacement for this part is fast and simple. This is an authentic OEM replacement curved hd. screw that is sold individually. It is for use with lawn mowers, tillers, snowblowers, wood chippers, edgers, and leaf blowers. It is compatible with certain models from Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

This clevis pin is a genuine MTD part, sold individually. This clevis pin can be used as a replacement part in a snowblower. The purpose of the clevis pin in a snowblower is to serve as a u-shaped fastening component used in the place of a bolt and rivet to secure various parts within the internal mechanisms of the appliance.The clevis pin in a lawnmower might have to be replaced if the clevis pin can no longer hold one or more components in place within the lawnmower. The clevis pin could suffer damage from general wear and tear with long-term use, due to collision with a hard object, or from exposure to the elements. If any damage occurs that reduces the functionality of the clevis pin, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This clevis pin is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard-Man.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

A cotter pin, also known as a hitch pin, is used to secure pins and shafts in place. Meant for snowblowers, riding lawnmowers, and lawn tractors, this bow-tie shaped cotter pin has a double-end design making it easy to pull or push through either side of a pre-drilled hole. This pin snaps into a locked position without tension, keeping it secure during operation. Designed for lawn and garden maintenance equipment, this part ensures secure fastening. If the power equipment is used frequently, cotter pins may have to be replaced regularly so it would be practical to keep extra bow tie cotter pins on hand. It is highly recommended that work gloves be worn during the installation of this part. This part is compatible with Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut brands of lawn mower, snowblower, and log splitters. This is a genuine OEM replacement part that is sold individually.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

This drive cable is found on lawnmowers to connect the handle drive lever to the transmission. The cable tells the transmission to move the mower to cut the grass when the handle is pulled up. When the handle is let go, the transmission stops, and so does the mower. If the lawnmower does not move forward when the handle is pulled up, the drive cable should be checked to ensure it is still connected. Vibrations from the lawnmower could cause it to come loose. If the cable is damaged or missing, it should be replaced so that the handle drive lever will work correctly.Before replacing the drive cable, remove the spark plug from the lawn mower. Wear safety gloves and eye protection. Release the drive cable from the drive control lever. Remove the drive cover from the lawnmower and remove the drive cable. Connect the new drive cable to the transmission and reinstall the drive cover. Install the new drive cable on the mower handle. Install the spark plug and test the drive cable.This drive cable is a black part that is sold individually. It is designed for use on lawnmowers manufactured by Craftsman and Cub Cadet.

This control cable is a genuine MTD part, sold individually. This control cable can be used as a replacement part in a lawn mower. The purpose of the control cable, otherwise known as a clutch cable or a throttle cable, in a lawn mower is to power on the appliance such that it can be propelled forward when the component is engaged. The control cable of a lawn mower can be subject to damage in the form of puncturing, fraying, eroding, warping, ripping, and tearing. If any of these forms of damage preclude the control cable from propelling the lawn mower forward when engaged or serving any other of its functions, the control cable should be removed and replaced by this genuine OEM replacement part before using the lawn mower again. It is a simple replacement process that will require only basic tools to properly conduct. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is a genuine OEM replacement, directly from the manufacturer. It is sold individually. This control cable is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, and Cub Cadet.

The momentary switch is a part that is unique to self-propelled lawn mowers and used to control the power of the self-propelled movement. The momentary switch provides power when pressed and held, and will ensure that the unit operates properly while in use. Over time, the momentary switch can become worn, short out, or just stop working as it should. This will require a replacement with a compatible part or the self-propelled part of the machine will not work properly. This genuine OEM part is compatible with self-propelled mowers from Cub Cadet, Bolens, MTD, Murray, and Troy-Bilt. It is made of durable materials and sold individually. Replacing this switch requires a wrench and screwdriver, as well as a socket set. Without a self-propelled switch, the mower will still operate but it will require the user to push the machine with their entire body weight. This can make the process of mowing much more difficult and often cause further unnecessary wear to the machine, which is why a replacement is essential.