Parts for Poulan 031: Driveshaft / Handle / Shield Parts

This throttle wire is a genuine Husqvarna part, sold individually. This throttle wire can be used as a replacement part for a string trimmer. The purpose of the throttle wire for a string trimmer is to regulate the speed and rotation of the appliance so the operator can specify the pace at which the appliance is used.A throttle wire might have to be replaced at some point within the standard lifespan of a string trimmer in the event that it suffers damage that renders it useless, broken, or malfunctioning. The throttle wire might be punctured, torn, frayed, eroded, or warped to the point that it cannot regulate the speed of the string trimmer. If this occurs, the throttle wire should be removed and replaced by this genuine OEM replacement part before using the string trimmer again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This throttle wire is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Weed Eater.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

Designed for use with a wide range of string trimmers, this momentary switch is a genuine OEM replacement part. A momentary switch, also known as a kill switch, is a safety precaution that kills an appliance's engine in a moment, even if the engine is not set to the off position. This helps prevent accidents if the operator begins to lose control of the trimmer. At the touch of a button, the engine cuts and cannot be restarted for a short period (usually about five seconds). Momentary switches are positioned in a way that they don't often sustain damage but, over time, they can wear out. Once a switch stops working, it will need to be replaced to ensure safe operation. This is a fairly straightforward fix that only requires a screwdriver to open the tiller's handle and pliers to safely remove the wiring. This part is designed for string trimmers made by Poulan, Weed Eater, Paramount, and Husqvarna. It ships individually of any other hardware is comes sourced from the original manufacturer.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

This trigger is used on trimmers and pruners. By applying different levels of pressure to the trigger, the operator can control how fast or slow the motor inside the device will operate. Pulling the trigger engages the throttle, which directs the lawn equipment to work harder. Releasing pressure slows down the operation. The trigger may wear out or become damaged through use, from dropping, or by accident. A trigger replacement is required to use the equipment, as it won't function safely or correctly without it.Wear gloves when replacing the trigger. The process is completed quickly and easily by attaching the replacement trigger to the throttle cable. Be sure the throttle cable is attached to the carburetor accurately first. Check the manufacturer manual for precise instructions on installation.This trigger is a genuine OEM part that can be used in Husqvarna, Craftsman, Poulan, Weed Eater, AYP, Jonsered, RedMax, and McCulloch products. It is sold individually. The trigger is made of durable, high-quality plastic. The part is for lawn tools and equipment, including various trimmers and some pruners. If a screw is required to complete the installation, it must be purchased separately.

This replacement part is a drive shaft assembly. It is a genuine replacement part made by Husqvarna. This part is typically found in machines or appliances that use wheels to move. The drive shaft assists the user in providing torque from the engine to the wheels. A new drive shaft assembly might be needed if the user notices that the machine is not working properly. This can be due to the engine being unable to relay the force to the wheels, which prevents it from moving forward. Be sure to wear work gloves when working close to the engine of any machine. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This drive shaft assembly is a genuine OEM replacement part to ensure long-lasting use.

This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.

This replacement part is an assembly wire guard. This part is commonly found in line trimmers or edgers and is responsible for assisting the user in performing an accurate cut during any job. A new assembly wire guard might be needed if the current one is missing or damaged in any way. This can be from wear and tear after years of normal use or from a single incident that may have caused it to no longer work properly. If the assembly has become dented, bent, or cracked, it might be time to replace it. This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This replacement part is a line guide, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This line guide is small but aids in creating straight lines while cutting the grass in many different lawn mowers. A new line guide might be needed if the user notices the current one is not working properly. If the cutting lines of grass are not as straight as normal there might be an issue with the line guide inside of the machine. Be sure to wear working gloves while replacing this part as it is typically found near the blades of the appliance. This small part is sold as a single piece. This part is a genuine OEM part sourced directly from the manufacturer. Be sure to reference the specific owner's manual for more information on how to replace this part.