Parts for Poulan P4500: Driveshaft / Handle / Shield Parts

This trigger is designed to control the operation of the equipment and its running speed. When this trigger is in working order, it connects to the throttle and the linkage, and when it is squeezed or depressed, it will speed up the rotation of the engine. Over time, the trigger can become worn with regular use. In some cases, these plastic triggers can also become damaged. Either way, replacing broken models with this OEM replacement trigger will get things back on track. This replacement trigger is compatible with equipment from Poulan, Husqvarna, and Weed Eater. There are more than 35 models of trimmers and pruners that can use this trigger. It installs easily with just a screwdriver. The throttle housing does have to be removed in order to release the cable from the existing trigger, but this only requires removing a couple of screws to get to the trigger itself for removal and replacement. This trigger is made of durable plastic materials that are designed to stand up to plenty of regular use. It is sold individually and customers will need to purchase any desired hardware separately.

This replacement part is a screw. This part is a genuine replacement part made by Husqvarna. Screws are small but important in many different types of machinery. Screws are able to hold different parts in place and help them stay secure during use so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is missing or damaged in any way. It is possible that the screw can become stripped over time and therefore not stay in place properly. If this is the case it is recommended that it be replaced. This repair should be fairly easy and only require a screwdriver and possible pliers. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use. Note that This is a genuine OEM replacement part.

This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.

This shield bracket is a genuine Husqvarna part, sold individually. This shield bracket can be used as a replacement part in a string trimmer. The purpose of a shield bracket in a string trimmer is to secure the shield so that flung debris can be safely kept away from the operator during use.The shield bracket in a string trimmer might eventually have to be replaced if it can no longer hold the shield firmly in place while the appliance is being operated. The shield bracket could be dented, punctured, scraped, warped, or eroded to the point that it cannot hold anything in place, and if this occurs, the shield bracket should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shield bracket is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This is a genuine tapping screw replacement uses in certain models of outdoor lawn and garden equipment engines. This replacement screw is standard hardware on several units, and it has a variety of applications. Owners will need to consult their parts diagram for exact location and use. The screw is made of durable metal, but it is also exposed to constant heat and vibrations when the machine is in use, which can cause wear, damage, or even breakage over time. In some cases, the screw may become loose or get lost in the course of other repairs. In this case, a replacement will also be necessary. It's best to choose a genuine OEM screw like this model from Poulan. This screw is compatible with several blowers, saws, trimmers, and hedge trimmers from Poulan, as well as select units from Weed Eater, Jonsered, Paramount, and Husqvarna. A hex screwdriver or allen key will be required to replace this screw. Be sure to wear gloves and allow equipment to cool before working. This general use screw might be good to purchase in multiples to keep extras on hand in case of emergency. Each screw is sold as an individual part.

This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.

This part is a replacement spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current spring is broken or defective, this part can be used as a replacement. It is intended for use with trimmers.The spring works by applying tension to the head of the trimmer. Over time and with regular use, springs can easily break or become eroded, requiring replacement. When working on or near an engine or blades, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this spring, the appropriate owner's manual and equipment diagrams should be referenced. This spring is suitable for use on a variety of trimmer models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This is the outer cover for a string trimmer housing. It clips into the bottom of the reel and secures it in place behind the central button. It’s constructed from a rubberized black plastic. This plastic is designed to be as durable as possible, while also flexing slightly when it’s under pressure. The cover serves two primary functions. It holds the reel in place and also acts as a mounting point for the central button. While it’s quite durable, it may eventually wear out due to regular use. A few scratches aren’t going to put a cover out of commission, but look for areas where the plastic has been worn through all the way. Replacing the cover is easy. Simply squeeze the old cover and pop it off the assembly. Position the new cover over the reel, then snap it into place. This cover is used primarily on Husqvarna string trimmers but is also used on some Poulan and Craftsman models. This is an OEM part sourced directly from Husqvarna, and it is sold individually.

This is the outer cover for a string trimmer housing. It clips into the bottom of the reel and secures it in place behind the central button. It’s constructed from a rubberized black plastic. This plastic is designed to be as durable as possible, while also flexing slightly when it’s under pressure. The cover serves two primary functions. It holds the reel in place and also acts as a mounting point for the central button. While it’s quite durable, it may eventually wear out due to regular use. A few scratches aren’t going to put a cover out of commission, but look for areas where the plastic has been worn through all the way. Replacing the cover is easy. Simply squeeze the old cover and pop it off the assembly. Position the new cover over the reel, then snap it into place. This cover is used primarily on Husqvarna string trimmers but is also used on some Poulan and Craftsman models. This is an OEM part sourced directly from Husqvarna, and it is sold individually.

This is a replacement knob for a trimmer. The plastic bump knob, which is connected to a spring, is used to secure the spool. A bump knob on a trimmer may get stuck or seized and will need a replacement. Before replacing the bump knob, remove the wire from the spark plug to avoid the accidental starting of the engine. Pull off the trimmer head housing and then use a flat head screwdriver to detach the old knob. Rotate it and then remove the component. Make sure the spring is in place then align the knob before rotating and snapping it in place. Take note that pulling the knob off may take extreme force when pulling. Some knobs are screw-mounted and a counterclockwise turn is necessary to unscrew it. This genuine OEM replacement part is sold individually and is compatible with specific trimmer models from Poulan and Weed Eater.