Parts for Poulan PE3500: Driveshaft / Handle / Shield Parts

This part is a screw. This is a genuine Husqvarna replacement screw and has been sourced directly from the manufacturer. This replacement part is a high-quality piece of standard hardware with many different applications. For proper installation instructions and usage guidance, it is recommended to refer to the equipment diagram supplied specifically by the manufacturer. It's common over time and with regular usage for screws to easily become stripped, rusted, broken, or lost. This can lead to improper functionality of outdoor power equipment. It's important to always use genuine manufacturer replacement screws to ensure the highest-quality materials and a proper fit. When installing screws, always follow proper guidelines and abide by appropriate safety measures. Husqvarna screws are manufactured from high-quality, durable metal. This replacement screw is designed to various models of trimmers and hedge trimmers, blowers, and chainsaws manufactured by Husqvarna, Craftsman, Poulan, and Weed Eater. Please note this screw is a genuine OEM part made of durable, non-corrosive metal and is sold individually.

A hex wrench is a standard tool that drives bolts and screws that have hexagonal sockets on the head. This hex wrench is 5/32 inches in size and offers six pressure points in comparison to a Phillips screw which only has four. A screw or bolt is less likely to be stripped when using a hex wrench. In some cases, hex wrenches get lost and a replacement is needed. While they are made of durable materials, they can also become damaged. If a hex wrench is broken or has been lost, a replacement will be needed for use with lawn equipment. A hex wrench that is dirty or has had corrosive materials on it also may need to be cleaned or replaced to prevent damage to screws and bolts. This is a replacement hex wrench that is used with string trimmers, leaf blowers, edgers, chainsaws, and pole pruners created by Turf King, Craftsman, Paramount, Husqvarna, Poulan, Poulan Pro, and Weed Eater. It is a genuine OEM replacement part directly sourced from the manufacturer. This item is sold individually.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement part in string trimmers, edgers, chainsaws, and pole pruners.The screw in a small engine outdoor appliance might eventually have to be replaced in the case that the screw is lost, misplaced, or damaged from general wear and tear with long-term use. If the screw is lost or misplaced and its absence is noted by the operator, the screw should be replaced by this genuine OEM replacement part as soon as possible. If the screw is dented, cracked, punctured, or otherwise damaged, it should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.

This blade is a genuine Husqvarna part that fits various Husqvarna models. This blade can be used as a replacement part for lawn edgers, which are used to edge the areas of a lawn that are surrounded by or touching pavement.If the blade has made contact with the sidewalk, driveway, patio, garden, or other surface by which the lawn edger is passing, there is a chance that the blade will need to be replaced. Look for damage on the surfaces with which the lawn edger blades have made contact. Additionally, use the lawn edger and check if it its trimming and edging ability has declined or if there is a strange sensation in the feel and experience of trimming, such as a vibration coming from the equipment. If this is the case, the blade might have to be individually replaced. The appliance should not be used again until this replacement has occurred. Remember to always wear gloves when handling, repairing, and operating outdoor equipment such as lawn edgers.This blade is compatible with the brands Husqvarna, Weed Eater, and Poulan.

This replacement part is a washer. This part is small but important in various types of machinery. Washers work with other small parts like screws and nuts to ensure that components are secured within the equipment.A new washer might be needed if the current one is worn down or otherwise damaged. Work gloves are recommended when working with small parts. Be sure the engine is powered down before attempting to complete this job.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This part is a replacement nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current nut is defective or broken, this part can be used as a replacement. It is intended for use with outdoor power equipment.Nuts are a standard piece of hardware and are essential as they secure together different components. This part should be replaced if stripped, corroded, lost, or broken in any way. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this nut base, the appropriate owner's manual and equipment diagrams should be referenced.This nut is suitable for use on a variety of lawn mower models manufactured by Husqvarna, Poulan, other brands. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

This locknut is a genuine Husqvarna part, sold individually. This locknut can be used as a replacement part in string trimmers, leaf blowers, edgers, and chainsaws. The purpose of a locknut for one of these small engine outdoor appliances is to serve as a fastening component within the internal mechanisms of the appliance in conjunction with a bolt.If the locknut has been stripped away or, in its absence, has left one or more components detached from the appliance, the locknut should be replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This locknut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, and Paramount.

This replacement part is a screw. This is a genuine replacement part made by Husqvarna. This part is typically very small but important to many different types of appliances. They are responsible for holding things in place so that the engine can run smoothly.A new screw might be needed if the current one is missing or damaged. This might include being dented, bent, or cracked. It is not unusual for screws to be stripped down after years of normal use. If this is the case is it recommended that these parts be replaced as soon as possible. The repair should be simple and only require a screwdriver and possible pliers if the previous screw is lodged in place. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit.

This replacement screw is intended for use on a variety of lawn and garden tools to attach components. It is a genuine OEM part sourced directly from the manufacturer. It is used to attached the trimmer head to the shaft in weed eaters and in many other applications on other tools. Overuse and normal wear and tear can cause damage to the screw. The screw can also become stripped when it is over-tightened or bent from contact with heavy debris. The screw will need to be replaced if this happens. Routinely inspecting equipment will help reveal broken or missing screws that need to be replaced or tightened. This screw is a star-slotted screw that requires a Torx screwdriver to remove it from the machinery. If the screw is in a tight-fitting area, an extension socket with a Torx bit can be used to remove the screw and to install a new one. When replacing a screw, check the remaining screws for damage and tighten any that are loose. This screw is a silver-colored, heavy-duty metal screw sold individually. It is compatible with trimmers, leaf blowers, leaf vacuums, hedge trimmers, and other equipment manufactured by Craftsman, Weed Eater, Poulan, and Husqvarna.