Parts for Weedeater FX26: Driveshaft / Handle / Shield Parts

This is a trimmer throttle cable assembly meant to be compatible with trimmers from several top brands. The throttle cable is the part that connects the throttle trigger and the carburetor. It can allow the user to provide power to the machine by regulating the carburetor airflow. If the cable has a problem, users will not be able to control the throttle properly or at all in some cases.The throttle cable could become damaged and need to be replaced. There are connections on each end of the cable that could be damaged or broken. The cable might also kink, which could cause it to break. Owners can replace the cable and extend the life of the trimmer. Tools commonly used for replacement include a hex key, Torx screwdriver, or a screwdriver depending on the model.The throttle cable assembly works with certain models of trimmer from Husqvarna, Weed Eater, and Poulan. The cable is sold individually. This is an authentic OEM replacement that has been sourced from the manufacturer.

This genuine OEM trigger is used on several different types of outdoor equipment, including gas trimmers and edgers. The trigger is attached to the throttle cable to control the speed of the spool assembly. With pressure, the trigger pulls the throttle cable, and in turn, speeds up the spinning hub where the cutting is done. It allows for faster or more difficult cuts to be performed. With routine use of the outdoor equipment, the trigger can break, wear out, or malfunction. Without a properly working trigger, the equipment cannot be controlled with the expected manual adjustments.Replacing the trigger on an edger or trimmer is easy and requires only a screwdriver for most makes and models. Wear work gloves when replacing the trigger. Remove the screws from the control handle housing. Remove the trigger from the throttle cable and put the new one on. Screw back into place and replace the control handle housing.This trigger is a replacement part. It is sold separately. The trigger piece works in a wide assortment of both Husqvarna and Weed Eater trimmers and edgers. The trigger is manufactured using rigid, high-quality plastic, and it is yellow.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Normally screws are found in many different types of appliances. These parts are important in holding different pieces together so that the user is able to operate the machine effectively. A new screw might be needed if some parts of the appliance are loose or missing from place.Screws can become stripped over time with normal equipment use. If this is the case it is recommended that they be replaced. The repair for this screw is simple and will most likely require common household tools as well as pliers. This screw is made of durable metal made for long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is also a genuine OEM replacement part.

This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.

This part is a screw. This is a genuine Husqvarna replacement screw and has been sourced directly from the manufacturer. This replacement part is a high-quality piece of standard hardware with many different applications. For proper installation instructions and usage guidance, it is recommended to refer to the equipment diagram supplied specifically by the manufacturer. It's common over time and with regular usage for screws to easily become stripped, rusted, broken, or lost. This can lead to improper functionality of outdoor power equipment. It's important to always use genuine manufacturer replacement screws to ensure the highest-quality materials and a proper fit. When installing screws, always follow proper guidelines and abide by appropriate safety measures. Husqvarna screws are manufactured from high-quality, durable metal. This replacement screw is designed to various models of trimmers and hedge trimmers, blowers, and chainsaws manufactured by Husqvarna, Craftsman, Poulan, and Weed Eater. Please note this screw is a genuine OEM part made of durable, non-corrosive metal and is sold individually.

This is a shield kit that is used on string trimmers from two major manufacturers. It is responsible for securing the cutter head and preventing grass clipping from landing on the user of the trimmer. The shield kit comes with the shield itself, two screws, a line limiter, a bolt, and a wing nut. This is an important component but it can become broken, damaged, or lost and will need to be replaced before continued use.If a visual inspection of the shield shows cracks, holes, or other damage, it should be replaced. The wing nut will need to be removed from the shield guard before it can be removed. Place the new shield using the mounting bolt. The line limiter can be installed using the included screws. Make sure the guard is lined up on the shaft before tightening the wing nut to the bolt.This is a replacement shield kit that is an authentic OEM part sourced directly from the manufacturer. It is sold as an individual kit. The shield kit can be used with string trimmers created by Poulan, Husqvarna, and Weed Eater.

This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.

The spool retainer replacement is used for trimmers and pruners. It helps to secure the spool in the hub assembly of the machines, so it will hold the line or string. Without a functioning spool retainer, it would be impossible to use the machine properly. The spool retainer can start to wear out over time and no longer function correctly. It might become broken, as well. Replacing the retainer is essential, and it is an easy replacement to make. The spool can be pressed into the hub assembly and it releases just as easily. This is a genuine OEM replacement part that is sold individually. It works with certain makes and models of pole pruners and trimmers. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro. When buyers are choosing the new spool retainer, they should ensure they are buying the correct replacement part.

This replacement part is a spool assembly. This is a genuine replacement part made by Husqvarna. This part is typically used with line cutters or edgers. The spool and line work to help the user create a straight line and stay consistent and steady when completing a job. A new spool assembly might be needed if the current one is missing or damaged in any way. This can mean that the spool itself has become dented, cracked, or bent. This can cause issues in dispensing the line and cause the part to need replacing. This should be a simple repair or replacement and only require common household tools. This spool assembly is a genuine OEM replacement part to ensure proper fit and long-lasting use. This part is sold individually and is sourced directly from the manufacturer.