Parts for Whirlpool YLEW0050PQ2: 03 - Drum And Motor Parts, Optional Parts (Not Included) Parts

Dryer lint screen catches fibers during drying cycles. Replace when torn, clogged, or damaged to maintain airflow and efficiency. Verify fit with your model.

Dryer won't heat or overheats? This thermostat regulates temperature during drying cycles. Easy 15-minute DIY fix restores proper heat control.

This thermostat is a direct-replacement oven temperature control that helps the oven maintain the set cooking temperature for consistent bake and roast results. It restores proper temperature sensing when the original fails. What it does:

• Senses oven cavity temperature and signals the heating element or gas valve to cycle on/off
• Helps correct issues like oven running too hot, too cool, or baking unevenly
• Works as the temperature-regulating sensor used by the oven control system
• Matches OEM function for reliable temperature control and repeatable cooking results

• One thermostat as shown

• Disconnect power (or gas) before beginning any repair; verify power is off with a meter
• Accessible from the oven control housing or rear panel on most models; remove trims/panels as needed
• Handle component and capillary/tubing carefully to avoid kinks or damage

Mounting screw secures panels, brackets, and trim to the appliance frame. Replace if screw is stripped, missing, or damaged to restore secure fastening.

Dryer drum felt seal prevents air leaks and noise around the drum. Replace if worn, torn, or detached to restore proper airflow. Confirm fit with your model.

This genuine replacement wheel helps support and guide the dryer drum so it spins smoothly and quietly. Restores stable drum rotation to reduce rubbing, wobble, and noise from worn or damaged support hardware. What it does:

• Supports the dryer drum at the rear or front bearing to maintain proper alignment
• Helps the drum rotate smoothly to prevent scraping and uneven wear
• Reduces vibration and squealing caused by a worn or broken wheel
• Works with the dryer's axle/shaft and housing to stabilize drum movement

• One wheel as shown

• Disconnect power before starting any repair to avoid electrical shock
• Remove the dryer front or rear panel per the service manual to access the wheel
• Inspect related parts (axle, bearing, clips) and replace if damaged for best results
• Use hand tools and avoid forcing parts; follow the manufacturer's instructions

Replacement housing cover for your dryer's control panel. Installs on the top front of the unit. Order a new one if yours is cracked or broken.

This drive motor powers the washer's agitation and spin functions so the tub turns reliably during wash and spin cycles. Replacing a worn motor restores proper drive operation and helps the machine complete cycles. What it does:

• Provides rotational force to the transmission/drive system for agitation and spin
• Enables the washer to start and maintain tub motion during wash and spin cycles
• Commonly replaced when the washer fails to agitate, won't spin, or stops mid-cycle
• Can address humming, grinding, or intermittent motion caused by a failing motor

• Disconnect power and water supply before beginning service
• Follow the OEM service manual for removal and replacement instructions
• Test operation after installation and reassemble panels securely.

Fix a dryer that won't start or hums but doesn't spin. This motor run/start capacitor restores reliable motor operation. DIY-friendly repair in under an hour.

Replacement mounting nut for dryer assembly. Used to secure components and panels. Replace if stripped, missing, or damaged during maintenance or repair.

Replacement screw secures panels, brackets, and trim on washers and dryers. Replace missing, stripped, or damaged fasteners to restore proper fit.

This band is a replacement drum drive band that helps transfer motor power to the dryer drum for proper tumbling and rotation, restoring normal drying performance and reducing rubbing or slipping. What it does:

• Wraps around the drum to provide a friction surface for the drive motor to turn the drum
• Helps maintain consistent drum rotation for even drying
• Can reduce slipping, squealing, or intermittent tumbling when worn
• Supports smooth operation and prevents excessive wear on related drive parts

• One replacement band

• Disconnect power before beginning
• Inspect drum, idler, and motor for wear while replacing the band
• Use proper routing and tension per the appliance's service diagram to avoid slipping
• Do not overtighten; ensure secure seating before testing operation

This 72-inch dryer drive belt transfers motor power to rotate the drum. Replace when worn, frayed, or broken to restore tumbling action. Verify fit.

Stacking kit secures dryer on top of washer for space-saving installation. Replace if brackets are missing, broken, or worn from previous setup.

Color: White. Size: 1 qt. can. Acrylic appliance paint.

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage. 

Symptoms needing for Appliance Spray Paint include:

• Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
• A desire to refresh or update the appearance of the appliance without the need for complete replacement
• Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.