Parts for Whirlpool YLEW0050PQ3: 03 - Drum And Motor Parts, Optional Parts (Not Included) Parts

This thermostat is the temperature control switch that regulates cooling cycles to help keep your refrigerator at the right temperature. Replaces a worn or faulty control to restore consistent cooling performance. What it does:

• Senses cabinet temperature and opens/closes the cooling circuit to maintain set temperature.
• Starts and stops the compressor and/or evaporator fan based on temperature demand.
• Commonly used when the fridge runs constantly, doesn't cool enough, or cycles on and off too frequently.
• Works with mechanical temperature control systems.

• Disconnect power before diagnosis and replacement to avoid electric shock.
• Mount in the original location and route capillary/tubing per original routing; avoid kinks.
• Test operation after installation by allowing the unit to run through a full cycle.

This thermostat is a direct-replacement oven temperature control that helps the oven maintain the set cooking temperature for consistent bake and roast results. It restores proper temperature sensing when the original fails. What it does:

• Senses oven cavity temperature and signals the heating element or gas valve to cycle on/off
• Helps correct issues like oven running too hot, too cool, or baking unevenly
• Works as the temperature-regulating sensor used by the oven control system
• Matches OEM function for reliable temperature control and repeatable cooking results

• One thermostat as shown

• Disconnect power (or gas) before beginning any repair; verify power is off with a meter
• Accessible from the oven control housing or rear panel on most models; remove trims/panels as needed
• Handle component and capillary/tubing carefully to avoid kinks or damage

This is a genuine replacement mounting screw used to secure appliance panels and components. It restores proper fastening to reduce vibration and prevent parts from loosening during normal operation. What it does:

• Secures panels, brackets, or trim to the appliance frame
• Prevents rattling or vibration caused by loose fasteners
• Keeps wiring and small components held in place
• Helps maintain proper alignment of removable parts

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand, then tighten until snug; do not overtighten
• Keep removed fasteners organized to ensure correct reassembly

This genuine replacement wheel helps support and guide the dryer drum so it spins smoothly and quietly. Restores stable drum rotation to reduce rubbing, wobble, and noise from worn or damaged support hardware. What it does:

• Supports the dryer drum at the rear or front bearing to maintain proper alignment
• Helps the drum rotate smoothly to prevent scraping and uneven wear
• Reduces vibration and squealing caused by a worn or broken wheel
• Works with the dryer's axle/shaft and housing to stabilize drum movement

• One wheel as shown

• Disconnect power before starting any repair to avoid electrical shock
• Remove the dryer front or rear panel per the service manual to access the wheel
• Inspect related parts (axle, bearing, clips) and replace if damaged for best results
• Use hand tools and avoid forcing parts; follow the manufacturer's instructions

This drive motor powers the washer's agitation and spin functions so the tub turns reliably during wash and spin cycles. Replacing a worn motor restores proper drive operation and helps the machine complete cycles. What it does:

• Provides rotational force to the transmission/drive system for agitation and spin
• Enables the washer to start and maintain tub motion during wash and spin cycles
• Commonly replaced when the washer fails to agitate, won't spin, or stops mid-cycle
• Can address humming, grinding, or intermittent motion caused by a failing motor

• Disconnect power and water supply before beginning service
• Follow the OEM service manual for removal and replacement instructions
• Test operation after installation and reassemble panels securely.

This motor run/start capacitor helps the appliance motor start and run more reliably, restoring normal operation when the original capacitor has failed. Replacing a bad capacitor can reduce motor humming and prevent startup issues. What it does:

• Provides the stored electrical charge needed to start and stabilize the motor
• Helps the compressor, fan or motor reach proper speed during startup
• Commonly replaces capacitors that are weak, bulging or not holding charge
• May resolve symptoms like humming, intermittent starting, or motors that won't run

• One replacement capacitor

• Disconnect power at the breaker before attempting any service
• Verify capacitor is discharged and use insulated tools; capacitors can hold a dangerous charge
• Confirm compatibility with your appliance using model or serial number before ordering

This is a genuine replacement screw that secures appliance panels and small components to restore proper fit and reduce noise. Use it to replace missing or stripped fasteners for a secure, long-lasting connection. What it does:

• Fastens panels, brackets, trim, and small internal components
• Restores proper alignment to eliminate vibration or rattling
• Replaces missing or damaged screws that cause loose parts
• Helps ensure panels and assemblies stay securely mounted during operation

• Disconnect power and/or gas supply before working on the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Hand-start the screw, then tighten firmly but avoid over-torquing
• If threads are damaged, replace with the correct OEM screw rather than re-using

This band is a replacement drum drive band that helps transfer motor power to the dryer drum for proper tumbling and rotation, restoring normal drying performance and reducing rubbing or slipping. What it does:

• Wraps around the drum to provide a friction surface for the drive motor to turn the drum
• Helps maintain consistent drum rotation for even drying
• Can reduce slipping, squealing, or intermittent tumbling when worn
• Supports smooth operation and prevents excessive wear on related drive parts

• One replacement band

• Disconnect power before beginning
• Inspect drum, idler, and motor for wear while replacing the band
• Use proper routing and tension per the appliance's service diagram to avoid slipping
• Do not overtighten; ensure secure seating before testing operation

Measures 72". If longer belt is needed use WP8182481 which measures 73 5/8".

Color: White. Size: 1 qt. can. Acrylic appliance paint.

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.

Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.

Symptoms indicating the need for Appliance Touchup Paint include:

• Visible scratches or chips on the appliance surface
• Areas of exposed metal prone to rust
• Blemishes that affect the overall aesthetic of the appliance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage. 

Symptoms needing for Appliance Spray Paint include:

• Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
• A desire to refresh or update the appearance of the appliance without the need for complete replacement
• Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.