Echo Pruner Parts

Oil seal prevents dust, dirt, and water from contaminating internal parts while retaining lubrication. Replace if leaking or motor runs poorly. Verify fit.

This is a genuine replacement bolt that is designed for use with select trimmers and brush cutters. The metal hex screw is generally found on the starter cover and used to secure the cover to the trimmer to protect the internal engine components. Although

This genuine Echo flywheel can be used as a replacement part for string trimmers, edgers, hedge trimmers, leaf blowers, leaf vacuums, and pole saws. The purpose of the flywheel in the small engine of such outdoor appliances is to save up the momentum gene

Replacement chain tensioner assembly for chainsaws. Installs near the bar to adjust chain tension. Replace if cracked, broken, or threads are stripped.

Many gas-powered small engines require the use of a pull cord to get the engine going. Rather than a starter, it is the pull of the cord that causes the engine to turn over and combustion to begin inside of the engine. These pull mechanisms often use a da

This is a rope guide that is used with various types of lawn and garden equipment. It connects the rope handle and the starter rope. It helps prevent damage to either of the ropes by covering them in durable plastic material. Over time or through use, the rope guide can become damaged or break. If this happens, the part will need to be replaced. First, put the equipment on a flat surface. Drain the fuel from the tool and disconnect the spark plug wire. Next, the starter will need to be removed from the tool to gain access to the rope guide. The rope guide and any other damaged components, such as the string and springs, can be removed from the tool before adding a replacement component. This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The rope guide is compatible with string trimmers, leaf blowers, hedge trimmers, and pole pruners manufactured by Little Wonder, Echo, and Shindaiwa.

This part is a crankcase gasket. The crankcase is the housing for the crankshaft, which is integrated into the engine block. The crankcase is split into two parts and the crankcase gasket creates a seal between the two halves.A new crankcase gasket may be needed if they are worn out or broken so there isn't a proper seal. It is recommended that the crankcase gaskets are replaced any time that the engine is serviced. This ensures that a proper seal is created when the engine is reassembled.This genuine OEM Echo part is sourced directly from the manufacturer and it is sold individually. This crankcase gasket is used on a variety of outdoor power equipment machines including hedge trimmers, leaf blowers, grass trimmers, edgers, pole saws, and brush cutters. It is compatible with outdoor power equipment that is manufactured by Shindaiwa, Echo, and Little Wonder.

A throttle return spring is a coil-shaped metal mechanism designed for use with outdoor lawn and garden power equipment such as trimmers, hedge trimmers, tillers, string trimmers, pole pruners, cultivators, pumps, reciprocating saws, regular saws, edgers, leaf blowers and vacuums, and pole saws. It is compatible for use with products manufactured by Echo, Mantis, Little Wonder, and Shindaiwa.The throttle return spring pushes the throttle closed when the user lets off the gas. A weak or failed throttle return spring is dangerous because it will prevent the throttle from easily returning to its resting position. This could pose a serious safety hazard to the person operating the machine and anyone nearby. This throttle return spring is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Echo. This throttle return spring is made of metal.

This genuine Echlimiter cap can be used as a replacement part for string trimmers, hedge trimmers, leaf blowers, leaf vacuums, and edgers. The function of a limiter cap for such small engine appliances is to reduce harmful emissions in the effort of environmental protection. A limiter cap can be worn down and lose its essential functionality over time from general long-term usage or exposure to corrosive external materials such as dirt, debris, and pebbles. A limiter cap can be pierced, punctured, or warped to the point that it loses its efficacy in a way that is visible to the naked eye, in which case it should be replaced in order to serve its function of reducing harmful emissions from the appliance. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This limiter cap is compatible with the following brands: Echo and Little Wonder.

This genuine Echo limiter cap can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners. The function of a limiter cap for such outdoor appliances is to minimize the environmentally detrimental emissions from the exhausts of these appliances.A limiter cap can suffer damage from general long-term use and standard wear and tear. If the limiter cap is damaged to the point where it is visibly eroded, punctured, pierced, ripped, torn, or otherwise rendered ineffective, it should be removed and replaced as soon as possible. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This limiter cap is compatible with the following brands: Echo, Mantis, and Little Wonder.

This collar makes up part of the fuel assembly inside various types of lawn and garden equipment. The part is made of durable metal and attaches directly to the fuel tank. The collar ensures the fuel tank is protected from damage from the tool's metal screws. It also works to secure the fuel tank so the engine will power on. The collar can become damaged or worn through use and may need to be replaced.If the collar is broken, it will no longer provide protection for the fuel tank. It can also remove the tank's secure attachment to the rest of the equipment. When replacing this part, an Allen wrench or a screwdriver may be needed. Unscrew the fasteners that hold the collar onto the fuel tank to remove it from the tool. Reattach the new collar to the equipment's fuel tank.This collar is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual unit. The collar is designed to be compatible with tillers, string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners manufactured by Echo, Shindaiwa, and Mantis.

Most lawn and garden machines operate on fuel, typically gas or a blend of gas and oil. The system for delivering fuel to the engine relies on fuel lines with durable seals and connections. The fuel grommet on many power tools is designed for use between the fuel tank and the filter. It is meant to secure the line and ensure there is no leakage and only minimal movement. This replacement fuel grommet is designed for Echo, Shindaiwa, LIttle Wonder, and other makes and models of lawn and garden gear. This includes trimmers, pruners, chainsaws, and many other small engine machinery. This is an OEM replacement part that will ship individually and will require pliers to install. It is important to ensure that this is the appropriate size and gauge for the machine in question prior to the repair.

This genuine Echo ignition switch can be used as a replacement part for string trimmers, hedge trimmers, leaf blowers, leaf vacuums, and edgers. The function of an ignition switch in outdoor appliances is to turn on the engine by connecting to the spark plugs and firing them up in order to power the engine.An ignition switch can be worn down over time by overuse or exposure to the elements. An ignition switch can also be damaged by a direct impact collision that can warp the component. It may also suffer from corrosion to the metal or plastic material that can prevent it from sending voltage and creating a spark to power on the engine. If this form of damage occurs, the ignition switch should be removed and replaced with this genuine OEM part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This ignition switch is compatible with the following brands: Echo and Shindaiwa.