Need Help?
Call
This electronic control board manages oven functions including temperature regulation, cooking modes, and the clock display on your range. It mounts behind the control panel and communicates with the oven's sensors and heating elements. Replace this board if the oven does not heat to the correct temperature, displays error codes, has a blank or malfunctioning display, or if the controls become unresponsive.
I first felt along each heating element (bake and broil) hoping to find a rough or blistered place on them. But they were both smooth with no irregular places. (replacing the elements would have been the easiest and cheapest repair. Pulled the back off the range (unplugged, of course) - checked wiring. There were no loose connections or burned wiring. I disconnected the elements and checked them with a ohmmeter (VOM) and both had continuity. Discovered that both elements used the same... Read more
Fix F10 error code or oven that won't heat with this control board. Manages temperature, timer, and heating modes. Moderate DIY repair with video guide.
I researched online and found that it was probably one of two things wrong: the heat probe or the control board (clock). Since the probe was less expensive, I ordered that on Appliance PartsPros. It arrived SO quickly, and with the repair video I easily replaced it. BUT... it still got the F10 reading. Sigh. So I found a local appliance repairman (I didn't want to replace a more expensive item if it turned out I was wrong). He was a good one: he listened to my story, said he was sure it was the... Read more
Fix F10, F11, or F12 error codes, oven temperature issues, or non-heating elements with this range control board. DIY repair in about 30 minutes.
I ordered a new kit and replaced it. It was easy except the video on the website did not include how to get off the front sticker. However, I did find another video to help Read more
Fix oven not heating, F10 error codes, or non-working controls. This electronic control board regulates baking temps and timers. DIY-friendly repair.
I ordered the oven control board, I was told that it would fix my problem. I installed it, which was extremely easy, and it worked. The oven worked flawlessly. Read more
Fix F11 or F13 error codes, blank display, or total control panel failure. This gas range circuit board restores oven timers and functions. DIY-friendly.
We simply removed the back panel off the stove, removed four screws and unplugged the controller. It was so quick and easy. It took about five minutes to replace. Read more
The Control Board is an OEM part for Frigidaire ranges. This part manages and regulates the functions of the range, including the oven temperature, cooking modes, and timing, ensuring precise control and efficient operation.
Causes of a bad control board can include electrical surges, overheating, or component failures due to regular wear and tear.
Symptoms of a bad Control Board include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
I googled the error code and symptoms my oven was exhibiting to determine the solution and which parts to order. I needed a new control panel and chose also to replace the overlay that shows on the front of the stove. I could have reused the old one because I turned out to be able to remove it without damaging it. I just kept it in case I damage the new one in the future. The “fast” shipping (not overnight) option had the part delivered the next morning, which was a nice surprise. I felt... Read more
Fix F99, F13 error codes, dead display, or non-working oven timer. This clock control board restores all timer and bake functions. DIY-friendly repair.
Replaced Oven Control Board. I already had removed the old part when I ordered the replacement. Part showed up in 48 hours. It took me about two minutes to install the new part. Tested to make sure it worked, then another 30 seconds to screw the back panel of the stove on. Read more
This electronic control board manages oven functions including temperature regulation, bake/broil cycles, and the clock display. It mounts behind the control panel and communicates with the oven's heating elements and sensors. Replace this board if the oven won't heat, displays error codes, has a blank or flickering display, or if the clock and timer stop working correctly.
After finding or oven no longer heated, we found that the clock/time (controller) board had failed and fused one lead of the wiring harness to the board. We replaced the board and entire wiring harness. Took about an hour to match the direct fit wiring harness and mount the new board. The job wasn't difficult just a little time consuming. Read more
Fix oven not heating, error codes, or beeping issues with this range control board. Manages temperature settings and oven functions. 25-minute DIY repair.
Turned off the power. Pulled out the stove. Removed back of upper part of stove. Removed old control board. Took photos with phone to make sure I got wires back on correctly. Only 1 wire was difficult to remove and required gentle rocking with pliers. Put the overlay on the new board. Placed all the clips and wires back on the new board. Turned on power to test. Tested ok. Turned power off and resecured the board and back on the stove. Repositioned the stove. Turned power back on. I... Read more
Fix F10 error codes, blank displays, or temperature fluctuations. This oven control board restores bake/broil cycles and keypad response in your range.
Replaced the control board. Read more
Oven won't heat to set temperature or display shows error codes? This electronic control board manages bake/broil circuits and clock functions. DIY repair.
Fix a blank display, beeping error codes, or non-working oven timer with this range clock control board. Most DIYers complete this repair in 15 minutes.
I looked up and ordered a new display panel. Since it was not showing anything I was hoping something on the board just failed. When I got the new part I plugged it in and it has been working fine since. I wish I could have found some trouble shooting options for this type of problem but I could not find anything related to a blank display. Like I said fortunately the new panel worked. Iremember it took about 4 days to get the part which was not bad considering I did not want to pay for... Read more
This is a relay board that controls power to the surface burner elements on an electric range or cooktop. It receives signals from the electronic oven control and switches the heating elements on and off at the correct power levels. Replace this board if your surface burners fail to heat, heat inconsistently, stay on continuously, or if you notice error codes related to the surface elements.
Appliance parts pro recommended the control board, and I ordered it and install it very easy Read more
This electronic oven control board governs your range's heating functions and displays the time and timer. Replacing a failed board restores reliable bake/broil operation, accurate temperature control, and a responsive clock/timer interface. What it does:
Stumbled upon Appliance Parts Pros web site and after some research bought 2 circuit boards. (UIB) Interface Board AP4501702 and ESEC Relay Board AP5780950. I carefully replaced the UIB board first and it solved the problem. Things like taking the door off can be found on the internet and took me far more time than actually replacing the board. I have never used APP before but understand that the other board is returnable. I am a very happy and future customer. Read more
Fix display issues, unresponsive controls, or oven overheating with this electronic control board. Manages bake/broil functions and timing display.
Unplugged oven and removed back panel of oven, found schematics taped to back of oven. Found a relay board that was burned where upper heating element plug connected to it. Replaced relay board and then repaired burned connector by replacing the spade terminal ends that were melted. Suspect connection was loose and that caused board damage. The other board i replaced because some display segments had stopped working with oven temperature. Was difficult to see what temp the oven was. This was a... Read more
Main electronic control board for electric cooktops. Manages user interface and appliance functions. Replace if board is damaged, burnt, or unresponsive.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.