Cooktop Control Board

Replaced control board myself. Easy. Read more

I first felt along each heating element (bake and broil) hoping to find a rough or blistered place on them. But they were both smooth with no irregular places. (replacing the elements would have been the easiest and cheapest repair. Pulled the back off the range (unplugged, of course) - checked wiring. There were no loose connections or burned wiring. I disconnected the elements and checked them with a ohmmeter (VOM) and both had continuity. Discovered that both elements used the same... Read more

I researched online and found that it was probably one of two things wrong: the heat probe or the control board (clock). Since the probe was less expensive, I ordered that on Appliance PartsPros. It arrived SO quickly, and with the repair video I easily replaced it. BUT... it still got the F10 reading. Sigh. So I found a local appliance repairman (I didn't want to replace a more expensive item if it turned out I was wrong). He was a good one: he listened to my story, said he was sure it was the... Read more

I first checked the power , we had 220 volt at plug, I removed the back of the stove, checked things out , I found that the stove top burners still worked and the oven light worked. I tested and found that we had current to the timer and clock but nothing on the control worked to set the time, or to turn the oven on or to set the oven temp. I ordered this part on June 30th and received the next morning. I disconnected stove from electrical plug. Be Sure to unplug the stove for your... Read more

Replaced the oven controller. This needed the only removal of six hex screws securing the back guard rear shield, two-wire plugs on the control unit, and four Phillips screws. All are easily accessible. The only difficulty came from an apparent model design change that separated the control unit and the overlay - the labels for the control buttons (items 20 and 20a in the backyard parts diagram). Mine is a single unit (the overlay could not be removed without damage) led to the assumption that... Read more

I ordered a new kit and replaced it. It was easy except the video on the website did not include how to get off the front sticker. However, I did find another video to help Read more

I replaced the control. Read more

Exchange one MB with another MB. Just had to plug colored wires into the proper color code. Read more

I ordered the oven control board, I was told that it would fix my problem. I installed it, which was extremely easy, and it worked. The oven worked flawlessly. Read more

Ordered part and son-in-law replaced the part within 10 minutes. We ordered the part on Monday and the next day the piece arrived via mail! so quick we could hardly believe it! Nice! Read more

Ordered a Pcb board and membrane switch it fixed the problem Read more

I ordered the part and repaired it myself. I am a 67yr old widow. Read more

Replace control board. Read more

• Touchpad does not respond
• Will not program

I found exploded parts view of oven and looked for oven sensor probe and control card parts. I also looked at great videos and read past repair stories. I decided the problem had to be one of the two parts (probe or card) and ordered both. I decided that the probe should be changed first rather than involve a circuit card. I changed the probe and tested the oven and it works again. Read more

• Little to no heat when broiling

We ordered the Pwb(pcb) Assembly,sub, Part Number 6871W1N012B & received the part the next day. I couldn't believe how fast. My husband was able to replace in 15 minutes. My oven worked again! Read more