Electrolux Refrigerator Insulation, Sound Dampening Parts

The Ice Chute Door Insulation is an OEM replacement part for Frigidaire refrigerators. It is installed on the ice chute door to prevent warm air infiltration and moisture buildup around the ice dispenser.

Causes may include compression or cracking of insulating foam/material from normal use stress. Spills exposing it to liquid are also damaging.

Symptoms of defective insulation consist of:

• Ice accumulating within the chute cover area
• Condensation visible on exterior chute surfaces
• Inefficient icemaker performance due to altered temperatures

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The EVAPORATOR INSULATOR is an OEM part for Frigidaire refrigerators. It is a heat-resistant insulating pad or wrap that surrounds the evaporator coils. The insulator works to retain cool air and prevent warmer air from entering the refrigerated compartment.  

Causes of a bad insulator can include deterioration or breakdown of insulating properties over time due to aging materials. Cracks, holes, or compressed sections of the insulator result in reduced insulation performance.

Symptoms of a bad evaporator insulator include:

• Inconsistently cool or warmer fridge temperatures 
• Frost or ice buildup on evaporator coils or surrounding areas
• Higher than normal electric bills from inefficient cooling
• Warm or cold spots inside refrigerator shelves and compartments

This OEM Frigidaire replacement insulator is compatible with some Kitchenaid, Electrolux, Gibson, Kelvinator, and Kenmore side-by-side refrigerator models. 

This air duct insulation cushions and seals the refrigerator/freezer air pathway to help reduce condensation and noise. It replaces worn or missing insulation that can allow cold-air leaks and excess moisture build-up. What it does:

• Fits around the internal air duct to help prevent air leaks and reduce moisture buildup.
• Helps minimize condensation and frost in the cabinet and on internal components.
• Dampens vibration and reduces airflow noise from the duct area.
• Restores proper airflow sealing after damage, deterioration, or previous part removal.

• Insulation air duct piece as shown

• Turn off and unplug the appliance before accessing internal components.
• Remove shelves, panels, and any fasteners as needed to reach the duct; keep track of hardware.
• Position the insulation exactly as the original and secure any clips or adhesive used by the manufacturer.

Air duct insulation that fits over the refrigerator air duct to reduce condensation and help direct airflow for more consistent cooling. Replaces worn or torn duct insulation to help prevent moisture buildup and improve efficiency. What it does:

• Wraps around the refrigerator air duct to insulate and reduce condensation
• Helps maintain consistent air temperature as it moves between compartments
• Reduces moisture and frost buildup on the duct and surrounding components
• Restores original fit where torn, compressed, or missing insulation causes issues

• Before starting, disconnect power to the appliance to avoid electrical hazards
• Remove access panels per your model's service instructions to reach the duct
• Slide or wrap the insulation around the duct, ensuring full coverage and a snug fit
• Replace any damaged fasteners or adhesive strips; test operation and check for proper airflow after reassembly

This insulation piece fits inside the refrigerator cabinet to help maintain internal temperatures and reduce heat transfer, improving cooling stability and efficiency. It replaces worn or damaged insulation behind liners and panels. What it does:

• Provides thermal barrier between cabinet and exterior to help the cooling system maintain set temperatures
• Reduces cold-spot development and helps prevent excessive frost buildup behind liners
• Dampens vibration and minor noise from compressor and refrigerant movement
• Supports proper airflow pathways by filling gaps around panels and components

• One insulation piece as shown

• Disconnect power before beginning any work; for sealed-system safety, unplug the appliance
• Access typically requires removing interior liners or access panels—keep fasteners and clips organized
• Handle insulation gently to avoid tearing; replace any damaged retaining clips or adhesives

This evaporator block is the refrigerator evaporator coil assembly that removes heat from the freezer/refrigerator compartment to help maintain proper cooling and reduce frost buildup. What it does:

• Circulates refrigerant through the evaporator to absorb heat from the compartment
• Promotes cold airflow across the freezer and fresh-food sections when paired with the evaporator fan
• Helps control frost and ice buildup on the evaporator surface
• Common symptoms: reduced cooling, excessive frost or ice buildup, or warm freezer temperatures

• Always disconnect power to the appliance before servicing
• Replacing the evaporator typically requires accessing sealed refrigerant areas;
• Allow components to fully defrost and drain before removal to avoid water damage
• Handle the coil gently to avoid bending fins or damaging tubing

This cabinet insulation panel replaces the worn or damaged foam that surrounds the refrigerator compartment to help preserve internal temperatures and improve cooling consistency. It restores proper insulation where the original panel is missing or degraded. What it does

• Replaces torn, compressed, or missing cabinet insulation to help maintain refrigerator/freezer temperatures.
• Reduces cold air loss from the cabinet cavity that can cause frost buildup or longer run cycles.
• Helps the appliance reach and hold set temperatures more reliably.
• Supports proper airflow and component spacing behind liners and panels.

• Disconnect power before beginning any service to avoid electrical shock.
• Access may require removing interior liners or trim; keep fasteners organized for reassembly.
• Handle foam gently to avoid tears; position with the vapor barrier facing the original orientation.
• Use OEM instructions and replacement diagrams for exact placement; if adhesive is used, apply as directed by manufacturer.