Electrolux Refrigerator Control Board

The Defrost Timer is an OEM replacement part for Frigidaire upright freezers. It serves as a crucial component responsible for regulating automatic defrost cycles.

Causes of a faulty defrost timer relate to 20,000+ hours of constant exposure to freezer temperatures as low as -10 degrees Fahrenheit. Such extremes can compromise electrical switching mechanisms over prolonged usage periods.

Symptoms of a failed defrost timer include:

• Inability to initiate automatic defrost modes  
• Excessive ice and frost accumulation inside cabinet
• Warm areas detected due to impaired fan circulation
• Diagnostic codes indicating defrosting problems

This genuine Frigidaire replacement part is compatible with Kelvinator and some Kenmore units as well.

The Control Board is an OEM replacement part for Frigidaire refrigerators. This component serves as the brain of the appliance, managing and coordinating various functions such as temperature control, defrost cycles, and the operation of fans and compressors. A functional control board ensures the refrigerator maintains optimal performance and energy efficiency.

Control boards can fail due to power surges, electrical issues, or normal wear over time. A malfunctioning board can disrupt the refrigerator's functionality and impact its ability to preserve food effectively.

Symptoms of a bad control board include:

• Inconsistent or incorrect temperatures in the refrigerator or freezer
• Unresponsive controls or display panel issues
• The refrigerator not cooling or running continuously
• Error codes or unusual noises during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This compressor inverter control board powers and regulates the variable-speed compressor in your refrigerator by converting household AC into the controlled output the compressor needs. Replacing a failed inverter can restore compressor operation and normal cooling performance.

• Receives commands from the main control to vary compressor speed for efficient, steady cooling
• Converts AC line voltage to the controlled output required by the compressor motor
• Common symptoms of failure: refrigerator warm, compressor not running while fans/lights operate
• May also present as intermittent cooling, clicking or humming near the compressor, or visible damage on the module

• Disconnect power before servicing; this is a high-voltage component mounted at the compressor
• Note wire positions and transfer connectors one at a time; ensure all connections are fully seated
• Secure the module to the original mounting to maintain proper heat dissipation and vibration control

The PC Board is an OEM part for Frigidaire refrigerators. It serves as the control center of your refrigerator, allowing you to adjust settings, monitor temperatures, and access various functions.

A bad PC board can be caused by electrical issues, component failure, or damage. When the user interface and display board become faulty, it can result in issues such as unresponsive controls, inaccurate temperature readings, or a blank display.

Symptoms of a bad PC include:

• Unresponsive buttons or controls on the refrigerator
• Inaccurate temperature readings or inconsistent display
• Blank or flickering display

Replace your faulty PC board with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The electronic control board is the central circuit board that governs temperature settings and coordinates cooling-system operations. Replacing a failed board can help restore accurate temperature regulation, normal cycling of components, and responsive controls.

• Interprets temperature sensor input and maintains the selected setpoint
• Controls compressor and evaporator fan run times to regulate cooling
• Coordinates the defrost system in frost-free models
• Common symptoms of a failing board: no cooling, erratic temperatures, unresponsive or flickering display/buttons, or intermittent operation

• Disconnect power before servicing to avoid electrical shock
• ESD-sensitive component; handle by the edges and avoid touching circuitry
• Photograph wiring and transfer connectors one at a time to the new board
• Access and fasteners vary by model; refer to the unit's tech sheet or service manual

This electronic control board manages your refrigerator's core functions. It processes sensor inputs and directs cooling, defrost, and fan operations so temperatures stay consistent and the unit responds to the controls.

• Coordinates compressor, evaporator, and condenser fan operation for proper cooling
• Controls the automatic defrost cycle based on sensor feedback
• Can cause no-cool, intermittent cooling, or unresponsive controls when it fails
• May help with erratic temperatures, frequent cycling, or clicking from the control area

• Disconnect power before servicing; this is a sensitive electronic component
• Handle by the edges and use anti-static precautions
• Note/photograph wire connections and transfer one connector at a time
• Mount the board securely; restore power and verify normal operation per the service instructions

This infinite switch controls the heat level of a stove's electric surface element, letting you adjust burner power from low to high for cooking precision and stable element operation. What it does:

• Regulates voltage to a surface heating element so the burner heats at the selected setting
• Allows smooth adjustment across low-to-high heat settings
• Commonly replaces a switch when a burner won't heat, only heats on certain settings, or won't turn off properly
• Works with standard knob control interfaces to change element output

• 1 infinite switch for a single surface element

• Disconnect power to the range at the breaker before servicing
• Use insulated tools and avoid contact with terminal ends; verify power is off with a meter
• Keep track of removed hardware and wire locations; take a photo before disassembly for reference

This inverter is the compressor control module that converts incoming power and regulates motor speed for variable-speed compressors, helping the fridge maintain consistent temperatures and energy-efficient cooling. What it does:

• Supplies and converts power to the compressor motor so the compressor runs at variable speeds
• Regulates compressor speed to maintain steady cooling and reduce temperature swings
• Can cause the compressor not to run or intermittent cooling when faulty
• Fault symptoms may include error codes, fridge not cooling, or unusual compressor behavior/noise

• One inverter (compressor control) module

• Disconnect power to the appliance before starting to avoid shock
• Handle the board carefully and avoid static discharge; use ESD protection if available
• Verify the replacement PN and wiring match the original before connecting

This switch control board replaces the oven/range user control module that routes user inputs and power to heating and accessory circuits, restoring normal control response and selector function. Ideal when buttons or settings fail to respond. What it does:

• Receives user inputs from the console and sends control signals to heating elements and components
• Routes power through selector switches to select temperature, mode, or burner settings
• Commonly used when controls are unresponsive, intermittent, or produce incorrect settings
• Helps stop erratic element behavior caused by a faulty switch/control board

• Disconnect power at the breaker or unplug the appliance before inspecting or replacing the board
• Handle the board by its edges and avoid static discharge; use anti-static precautions if available
• Verify correct replacement by matching part numbers and connector locations before installation

This control/switch board receives user input and routes electrical signals to the appliance, restoring responsive controls and allowing circuits to operate as intended. Replace a failed switch board to regain reliable control panel function. What it does:

• Routes user button/knob inputs to the appliance control circuitry
• Sends power/control signals to switches, relays, or heating elements
• Works with the appliance's wiring harness and mounting points to fit into the control area

• Disconnect power at the breaker or unplug the appliance before starting
• Handle the board carefully and avoid touching contacts; observe basic ESD precautions
• Verify connector orientation and secure all wiring; do not force connectors

A replacement switch control board that operates the appliance's user controls and sends electronic signals to other components, restoring responsive button and selector operation for reliable use. What it does

• Routes user inputs from buttons/knobs to the appliance's control system so selections register correctly
• Powers and interfaces with displays, indicators, and other control electronics
• Common symptom: unresponsive or intermittent controls, buttons that don't work, or startup failures tied to the control panel
• Helps resolve control-related error codes when diagnostics point to the switch/board assembly

• Disconnect electrical power before servicing to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use ESD protection if available
• Access typically requires removing the control console or front panel; retain all screws and connectors
• Only install if compatibility with your model is confirmed;

This electronic control board regulates refrigerator functions like temperature, defrost cycles and display/status signaling to keep cooling and user controls operating properly. Replace a failed control board to restore normal electronic control and diagnostics. What it does

• Receives sensor inputs and directs compressor, fans and defrost components
• Manages temperature setpoints and cycles based on thermostat signals
• Controls user interface indicators and electronic readouts
• Can stop operations or cause error codes when the board fails

• 1 control board (main electronic control)

• Disconnect power before service to avoid electrical shock or damage
• Handle circuit board by edges and avoid touching components or connector pins
• Verify connectors and mounting are secure; match connectors before reapplying power