Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Electrolux Washer Dryer Combo Fuse Or Sensor

Best Seller
Electrolux High-Limit Thermostat
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204267

The High Limit Thermostat is an OEM part for Frigidaire dryers. It serves as a critical safety device, designed to cut off the power to the heating element if the dryer overheats. This thermostat helps prevent potential fire hazards by maintaining a safe operating temperature within the dryer.

Symptoms of a bad High Limit Thermostat include:

  • The dryer not heating up at all, indicating that the thermostat may have tripped or failed permanently.
  • Dryer repeatedly shutting off during cycles, which can be a sign that the thermostat is tripping too frequently due to overheating issues.
  • Excessive heat in the dryer, suggesting that the thermostat is not functioning properly and failing to regulate the temperature.

Causes of a bad high limit thermostat can include restricted airflow due to a clogged lint filter or venting system, malfunctioning heating elements that generate excessive heat, or simply the thermostat wearing out over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Shuts off too soon
  • Too hot
  • Takes too long to dry
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You The dryer did not heat!   Linda R. • La Jolla , CA • November 30, 2014

My appliance repair guy checked out the problem, but the stack washer dryer required the contractor to dismantle the cabinet to allow the repair to occur. So i wanted the parts available for the repair, so we would not have to have the dryer pulled apart in a small space for an extended time i ordered the parts on Friday afternoon and they arrived at my home before noon on Saturday! The contractor and the repairman were able to coordinate the repair on Tuesday morning, and though the... Read more

More
$38.95
Compare At:
$62.47
You Save:
$23.52

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Thermal Limiter
Genuine Frigidaire part
By: Frigidaire
Part Number: 134120900

The Thermal Limiter is an OEM part for Frigidaire dryers. It acts as a safety feature, designed to prevent the dryer from overheating by shutting down the appliance when the internal temperature exceeds safe limits. 

Symptoms of a failing Thermal Limiter include:

  • The dryer failing to start or stopping abruptly during a cycle
  • No heat being generated while the dryer is running
  • The dryer overheating or feeling excessively hot

Common causes for a bad thermal limiter include restricted airflow due to a clogged lint filter or venting system, component failure from age or faulty manufacturing, and unusually high operating temperatures from overloading the dryer or mechanical failures elsewhere in the system. When a thermal limiter trips or fails, it must be replaced to restore functionality to the dryer.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Shuts off too soon
  • Too hot
  • Takes too long to dry
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Worn bearing and felt causing dryer drum to rattle and creek   Bay S. • Bothell , WA • January 05, 2016

Recommendations have fun and a bucket to prevent losing parts. First watch the videos, practice disassemble and reassemble the dryer drum. Make certain you have a good screw driver and spatula from kitchen (could not find my putty knife). Secondly, clean and inspect everything, make sure the motor bearing and belt pulleys are in good condition with little or no play. Third after you have confidently disassembled, vacuum cleaned, inspected all the worn parts, grease the motor and pulley,... Read more

More
$11.95
Compare At:
$14.22
You Save:
$2.27

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Heat Sensor
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281135

The Dryer Heat Sensor is an OEM part for Frigidaire dryers. This sensor monitors the temperature inside the dryer drum to ensure clothes are dried effectively and safely by regulating the heat levels during the drying cycle.

Causes of a bad heat sensor can include wear and tear from frequent use, buildup of lint or debris, or electrical issues. A malfunctioning sensor can result in incorrect temperature readings, leading to under-drying or overheating of clothes.

Symptoms of a bad Dryer Heat Sensor include:

  • Clothes not drying properly or taking too long to dry
  • Dryer overheating or shutting off unexpectedly
  • Inconsistent drying cycles
  • Error codes related to temperature control

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Our dryer didn't heat   Larry L. • Poway , CA • November 10, 2014

Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits. I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have. I looked up my dryer, decided what was probably the problem,... Read more

More
$38.95
Compare At:
$55.90
You Save:
$16.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Control Thermostat (Electric)
Genuine Frigidaire part
By: Frigidaire
Part Number: 134048800

This dryer control thermostat regulates internal temperature by cycling the heater on and off. Replacing a failed thermostat restores proper, consistent drying temperatures to protect fabrics and improve overall drying performance.

  • Monitors exhaust temperature and opens/closes contacts to maintain target heat
  • Helps prevent underheating and overheating during drying cycles
  • Common symptoms of failure: no heat or low heat, long dry times, runs too hot, inconsistent temperatures
  • A sticking thermostat may cause the high-limit safety to trip
What's included: 1 control thermostat Install notes:
  • Disconnect power before servicing
  • Access location varies by model; typically mounted on the blower or heater housing
  • Move wires one at a time from the old thermostat to the new one; ensure tight, secure connections
  • After replacement, clean the lint path and verify exterior venting for proper airflow

Do-It-Yourself Stories from Customers like You My dryer was taking too long to dry my clothes.   Gerard C. • Millville , MA • March 08, 2017

I replaced both thermostats, the seals and the heating element and the belt. It's an easy job to keep my dryer last longer. Read more

More
$81.21
Compare At:
$95.83
You Save:
$14.62

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Safety Thermostat
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304406099

This safety thermostat is a temperature-sensitive switch that helps protect your appliance from overheating. When excessive heat is detected, it opens the circuit to stop power to critical components, helping prevent damage and ensuring safe operation.

  • Monitors temperature at a specific location and interrupts power if it exceeds a safe limit
  • Can cause no power, no heat, or shutdown during use when failed or tripped
  • Helps prevent overheating damage to internal components
  • Restores normal operation when replaced
What's included: Safety thermostat only. Install notes:
  • Disconnect power to the appliance before service
  • Note wire positions and terminal orientation before removal
  • Use proper tools and avoid bending or stressing terminals
  • After installation, check for underlying overheating causes (blocked airflow, failed fan, etc.)

More
$87.95
Compare At:
$103.78
You Save:
$15.83

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Cover Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 131729301

This is a factory cover assembly that protects and finishes a specific component area on your appliance, helping keep internal parts shielded from debris and damage for reliable operation.

  • Shields internal components in the designated area from dust, splashes, and accidental contact
  • Helps maintain proper airflow/containment where designed
  • Can address issues like a missing, cracked, or loose cover causing rattles, exposure, or poor fit
  • Restores a clean, secure enclosure to the original design
What's included: One cover assembly, as pictured. Install notes:
  • Unplug the appliance and shut off any applicable utilities before servicing
  • Use appropriate hand tools; retain and reuse original fasteners
  • Handle edges carefully and align tabs/slots before tightening screws
  • Test operation and inspect for proper seating and clearance after installation

More

Electrolux washer dryer combo fuse or sensor replacement parts are crucial for keeping your laundry routine seamless. These components ensure your appliance works efficiently and safely, allowing you to focus more on your day and less on your laundry.

Your Electrolux washer dryer combo handles everything from delicate fabrics to heavy loads. Fuses protect against electrical hazards by breaking the circuit when a fault is detected, and sensors optimize performance by monitoring moisture levels and temperature. High-quality Electrolux washer dryer combo parts ensure your appliance functions at its best, extending its lifespan and efficiency.

Using genuine OEM replacement parts for your Electrolux washer dryer combo is a smart choice. These parts are designed specifically for your model, ensuring perfect fit and compatibility. With OEM parts, you get the same level of quality and performance as the original components, keeping your appliance running like new.

If you're in need of an Electrolux washer dryer combo fuse or sensor, don't worry. These replacement parts are readily available and designed to meet the high standards of your appliance, ensuring it continues to serve your household efficiently.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store