Need Help?
Call or text
Show parts
This part is discontinued by the manufacturer and is no longer available for purchase.
Usually ships within 4 - 14 days
The replacement crankcase gasket seen here is for use with many different types of lawn and garden equipment. The purpose of the crankcase gasket is to fit between the crankcase and the crankcase cover. It helps to make sure that there are no oil leaks that could cause issues with the engine or make a mess when the machine is being stored. Owners should check on the gaskets when they are performing maintenance on their machines. Over time, the gaskets can start to crack or dry out. When this happens, it means that a leak is likely going to occur if it hasn't already. Owners will want to replace these gaskets regularly to ensure they do not have leaks. This is a genuine OEM replacement crankcase gasket that is sold individually. The durable gasket will work for models of many types of machines including lawn mowers, tillers, leaf blowers, generators, wood chippers, log splitters, and certain other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Simplicity, and Cub Cadet.
This precision-drilled burner orifice is sized for Type 4 butane applications. It meters gas to the burner so flames ignite reliably and burn cleanly when the appliance is configured for butane per the manufacturer's specifications. What it does:
This OEM starter grip is a replacement for select Briggs & Stratton engines. The starter rope grip provides the handle that is used to pull the starter rope. When it is pulled, the starter recoil spring engages the flywheel puller, which then causes the flywheel to rotate and starts the rotation of the blade as the engine fires. The starter rope grip is made of durable plastic but it can become damaged or cracked over time. If it is broken, the rope will be unable to be pulled to engage the engine until the part is replaced. This is a genuine starter grip designed to work with a variety of lawn and garden equipment that features a Briggs & Stratton engine with a pull-start. The starter grip is sold in two pieces with the grip and a cap that snaps on once the rope has been tied inside of the handle to secure it in place. The unit is sold individually. This item does not include the rope or any additional parts.
The fuel cap is a simple but important part of a lawn care machine. It provides a seal that helps to keep dirt and other debris from getting into the fuel and contaminating it. Over time, though, there may be issues with the fuel cap. It might no longer tighten properly, form a proper seal, or be lost all together. This is an authentic OEM replacement part from the manufacturer. This fuel cap can work with a range of lawnmowers, tillers, leaf blowers, generators, and other small engine equipment. It is compatible with brands like Briggs & Stratton, Toro, Cub Cadet, Simplicity, and Craftsman.
The fuel tank gasket is made to provide an airtight seal when mounting the gas tank on a variety of different engines. The high-quality gasket is made from composite material and is made to last. Over time, though, the gaskets will dry out and become brittle. When this happens, it will create leaks, which could allow air to get into the fuel tank and cause engine problems. Proper maintenance will include checking the gaskets to ensure they are in good shape. If they appear brittle, be sure to replace them as soon as possible. To remove the screw that secures the fuel tank, you will need to use a Torx screwdriver. When replacing the gasket for the fuel tank, make sure it is seated properly before finishing the reassembly. This is a genuine OEM part that is sold individually. It can work on a range of engines, including those from Toro and Briggs & Stratton machines.
The stop wire is a safety cable device offered on many types of lawn and garden equipment. It is pressed near the upper handle of a device to start it, which lets the blades spin and creates forward motion on equipment that is self-propelled. A stop wire can stretch out over time and will need to be replaced to ensure total safety. If the blade brake control is released and the blades continue to spin for more than a couple of seconds, the wire needs to be replaced.Take the equipment and put it on a flat surface before taking the metal on the stop cable and moving it out of the mower handle. Squeeze the center tabs of the wire with needle-nose pliers and pull the cable end through the bracket. Pull the other end out and then replace it with a new component.This is an authentic OEM replacement part for use with garden equipment engines. It is an individual part that is sourced directly from the manufacturer. This part is compatible with lawnmowers, wood chippers, snowblowers, generators, log splitters, tillers leaf blowers, and pressure washers by Briggs & Stratton, MasterCut, Craftsman, Simplicity, Toro, MTD, Cub Cadet, Lawn-Boy, Murray, and Wheel Horse.
This tube-pick up was created for three to five horsepower horizontal and five horsepower vertical engines with a two to three-quart tank and a pulse jet carburetor. As part of the carburetor, the tube-pick up moves gas from the float bowl to the main body of the carburetor. Sometimes the tube-pick up can become clogged up with particles and dirt, which makes it harder for gasoline to flow through it. This component can also become damaged or cracked, which means it will need to be replaced to operate the lawn equipment. Replacement requires removing the carburetor from the fuel tank, removing the tube-pick up and installing the new version. Carb cleaner may also be used in the process. This tube-pick up is a genuine OEM product directly from the manufacturer. It comes as an individual part and is made out of plastic. It is used for engines on leaf blowers, generators, tillers, lawn tractors, and lawnmowers by Simplicity, Briggs & Stratton, Cub Cadet, and Toro. A set of pliers may be needed to install the tube-pick up.