Parts for Craftsman 247.25003 / 2012: Engine Accessories Parts

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

This is a flange nut that can be used in a variety of lawn and garden equipment from different manufacturers. The nut is made of metal, measures 5/16x18, and is used to secure components in place. It also assists with preventing backing out caused by vibration. Over time, the flange nut can become damaged and will need to be replaced. If the flange nut in lawn and garden equipment has become damaged, is loose, or gets lost, then replacement is required. The level of difficulty of replacing a flange nut depends on which parts it's securing and what kind of equipment it is installed on. This flange nut is an OEM replacement part that can be used with lawn mowers, snowblowers, wood chippers, tillers, log splitters, leaf blowers, and edgers by MasterCut, Craftsman, Yard-Man, Toro, Bolens, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold individually and will require a wrench or socket for installation.

This part is a replacement hex bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can replace a defective or lost hex bolt in outdoor power equipment.This hex bolt is a standard piece of hardware named for its hexagonal shape and is used to secure together components in many different equipment types. This part will need to be replaced if corroded, damaged, stripped, or lost. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this particular hex bolt, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This hex bolt can be used with outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This is a genuine replacement oil drain hose designed for use on select MTD engines for outdoor power equipment. The drain hose is used to drain the oil from the engine so that the engine can run properly. This part is made of durable rubber, but over time it is subject to high heat and can crack or wear. If it becomes damaged, it could leak and cause the engine to die or not start at all. A replacement with an OEM part like this oil drain hose will resolve the issue. this project hose is designed by MTD to exact manufacturer standards and will fit perfectly in compatible models. This part is sold individually and does not include any additional hardware or components. In order to replace the drain hose, it will be important to allow the engine to cool completely. Wear gloves for hand protection and ensure that work is done in a well-ventilated area. In some instances, it may be necessary to drain the oil before replacing this part.

This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

This is a rubber grommet that is designed as a replacement for select lawn tractors and mowers. The rubber grommet is a part that is designed to protect parts from abrasion and provide passage for various elements in the mower. It will create a strong and durable seal in the machine but due to constant wear, heat, and vibrations, the rubber could become worn or cracked over time. The grommet could also be lost or misplaced in the process of other repairs. In either case, a replacement with this OEM part will resolve the issue. This genuine OEM rubber grommet is sold individually. Owners should disconnect the power to the tractor and allow the engine to cool completely before replacing this part. Wear gloves for hand safety, as well. The part is manufactured to exact standards by MTD and can be used in machines from Yard Machines, Bolens, MTD, Troy-Bilt, Yard Man, Cub Cadet, and Husky. Owners should refer to the parts diagram for exact placement of this grommet. Installation will require a screwdriver and wrench set.

This replacement part is a fuel valve. This is a genuine replacement part made by MTD. This part is typically found connected to the fuel tank and is able to allow the fuel to leave when necessary, but hold the rest in place during use. A new fuel valve might be needed if the current one is unable to perform the necessary actions. If the fuel tank is leaking or not able to hold the proper amount of fuel, the valve might need to be replaced. Wear work gloves when working with parts that may be covered in fuel. Refer to the proper owner's manual for more information on how to install this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.