Parts for Mtd 1P65B0B: Engine Assembly 1P65b0b Parts

This is a recoil starter assembly for lawn and garden power equipment. When the recoil starter rope is pulled, this causes the spark which starts the engine.A new recoil starter assembly will be needed if the recoil or pulley system has broken. The rope may become broken or frayed and the plastic on the pulley could crack. If the rope becomes loose and there is no tension when it is pulled, then a new recoil starter assembly will be needed.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. It is used on engines, lawnmowers, lawn tractors, and log splitters that are manufactured by MTD, Yard-Man, Yard Machines, Cub Cadet, Husky, and Troy-Bilt.

This part is a replacement shroud spacer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken shroud spacer in outdoor power equipment. Spacers ensure that equipment doesn't overheat or vibrate excessively by preventing too much friction from forming between moving components. They are essential to safe and proper functionality and should be replaced when no longer effective. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this shroud spacer, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this shroud spacer is suitable for use on outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a nut. This is a genuine replacement part made by MTD. Nuts are small but typically an important part of many different machines. These parts allow for pieces of the machine to stay secure and in place during use. Nuts usually work with other small parts such as screws and washers to ensure the proper functioning of the machine.A new nut might be needed if the current one is visibly missing or damaged. These parts can become worn down over time due to normal wear and tear. If this is the case it is recommended that it be replaced as soon as possible. This repair should be fairly easy and only require common household tools. Be sure the engine is completely cooled down before attempting to replace this part.This part is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

This brake assembly bolt is a genuine MTD part that is manufactured to be a replacement part for lawn tractors, push walk-behind mowers, log splitters, trimmers, chippers, shredders, and other engines.On engines such as these, the brake assembly helps work the brake, which stops the engine and any forward motion. It is not abnormal for brake assembly bolts to become worn over time and need to be replaced. This brake assembly bolt is designed for use with machines made by Black Max, Craftsman, Columbia, Cub Cadet, Huskee, Husky, Mastercut, MTD, Remington, Yard Machines, and Yard-Man. It is a genuine OEM part sourced directly from the manufacturer and is sold individually.

This flange bolt is a genuine MTD part, sold individually. This flange bolt can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, string trimmers, leaf blowers, edgers, log splitters, wood chippers, and tillers. The purpose of a flange bolt is to serve as a fastening component, in conjunction with a nut, so components can be secured and affixed to one another over time.The flange bolt might have to be replaced at some point within the standard lifespan of the appliance if it is lost, misplaced, or damaged. The flange bolt can be gradually stripped over time, in which case it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This flange bolt is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Cub Cadet, Craftsman, Yard-Man, Yard Machines, MasterCut, and Huskee.

This replacement part is a fuel tank. It is a genuine replacement part made by MTD. This fuel tank is usually found in appliances that use fuel and engines to operate. The fuel tank is responsible for holding the fuel before the carburetor uses it to start the engine during use. A new fuel tank might be needed if the user notices that the current tank is cracked, punctured, or otherwise damaged. This can be due to normal wear and tear. It is recommended that the user wear gloves during this repair as the fuel tank can still be full. This fuel tank is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is also a genuine OEM replacement part.

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.

This replacement fuel tank is an authentic OEM part for a lawn mower. The fuel tank attaches to the exterior of a lawn mower and allows the appliance owner to top up their mower with more fuel. Fuel is then passed from the tank to the carburetor through a fuel line. Fuel tanks are made of durable reinforced plastic but because they are located on the outside of the mower, they are susceptible to physical damage. If something heavy were to fall on the fuel tank, it could be dented or even punctured. A damaged fuel tank will leak gasoline on the mower body, creating a potential fire hazard. In this situation, the tank should be drained and then unbolted and replaced. Be sure to remove the fuel line before unbolting it from the mower. This replacement fuel tank is a top of the line part sourced from its original manufacturer. It is compatible with lawn mowers made by MTD, Huskee, Cub Cadet, Bolens, Yard Man, Yard Machines, and Troy-Bilt. This part does not include a fuel cap or a grommet. These parts are sort separately.

The flywheel key keeps the engine flywheel and the crankshaft connected. In the event that the engine is forced to a sudden stop, the flywheel key could be sheared off, making it impossible for the engine to start back up again. Replacing the flywheel key is a part of routine maintenance for many modern engines, so it should be inspected and replaced as needed. This sturdy metal flywheel key is easy to install, but remember to choose the right torque setting when doing the replacement. Always disengage the spark plug and wear gloves when replacing engine parts. This genuine flywheel key is designed to be used in a number of lawn and garden equipment products from MTD, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Husky, and Bolens. It can be used as a replacement for many models of snowblowers, lawnmowers, and log splitters. Sold individually.

This crankcase gasket is a genuine MTD part, sold individually. This crankcase gasket can be used as a replacement part in lawnmowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers. The purpose of the crankcase gasket for one of these outdoor appliances is to seal off and protect the area surrounding the crankcase gasket from leakages and the accumulation of external materials within the infrastructure of the crankcase.The crankcase gasket might have to be replaced if the seal is broken due to damage or stripping away of the gasket. This could occur as a result of general wear and tear from long-term use or due to collision with a hard object that warps the gasket beyond functionality. If this occurs, the crankcase gasket should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This crankcase gasket is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, Yard-Man, Huskee, and MasterCut.

This replacement part is a carburetor insulator. This is a genuine replacement part made by MTD. This part is found in many types of machinery and is responsible for regulating the temperature within the machine to ensure that it runs smoothly and effectively. A new carburetor insulator might be needed if the appliance or machine is frequently changing temperatures and there is no regulation inside the engine. This can be due to a faulty carburetor and should be replaced immediately if this is the case. Refer to the proper user manual for more information on how to repair or replace this part. Work gloves are also recommended when replacing this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

A gas powered engine often requires priming before it can run, which means injecting some of the fuel into the engine's carburetor. Here, a careful balance of air and gas will receive a spark that causes combustion. The most common way to prime an engine is to use a primer assembly that is activated by a bulb that is pressed to create suction and draw fuel into a reservoir or carburetor. This replacement fuel bulb is for snowblowers that rely on gas powered engines to run. The fuel bulb is very flexible and made to endure seasonal conditions. It works with Craftsman, Yard Machines, MTD, Troy Bilt, and Bolens snowblowers. This is an OEM replacement part that fits into the cover assembly and which requires only a wrench to replace and install. It is sold individually, and other components of the priming assembly may be needed.

It's best to have spare O-ring gaskets on hand to rebuild a carburetor when the need arises. Use this manufacturer-approved replacement part to complete the process. When outdoor power equipment shuts off just after starting or won't start altogether, there may be a problem with the carburetor. It could be a leak that causes compression problems keeping the machine's engine from starting. Gasoline may drip from the float bowl because of an O-ring that won't seal or seat evenly all around, or one that has become brittle over time. This is a genuine OEM part compatible with specific lawnmowers, snowblowers, wood chippers, log splitters, tillers, and other garden maintenance machines from Craftsman, MTD, Cub Cadet, MasterCut, Troy-Bilt, and Yard Machines. It is sold individually.

The fuel bowl gasket provide an airtight seal to the fuel bowl. This will ensure that air, along with dirt and debris, do not make their way into the fuel. Gaskets will wear out over time. They will start to crack and fall apart, and they will no longer be capable of providing you with the necessary seal for the fuel bowl. The repair is easy and should only take between half an hour and an hour. This is an OEM replacement fuel bowl gasket part that is made from high-quality, durable rubber. Each of the fuel bowl gaskets is sold individually. The gasket can work well with many different types of outdoor power equipment, including snowblowers, chipper-shredders, tillers, lawn tractors, mowers, and other small engines. The fuel bowl gasket is compatible with many brands, including MTD, Yard Machines, Yard-Man, Troy-Bilt, Huskee, Cub Cadet, and Mastercut.

This is a genuine OEM replacement fuel bowl bolt for a snowblower, tiller, or chipper engine. The fuel bowl is a part of the fuel filtration system designed to prevent sediment from clogging up the carburetor. Fuel moves from the fuel tank and passes through the fuel bowl to catch any debris. It is essentially a particle filter. This bolt mounts the fuel bowl in place. The two most likely reasons why a fuel bowl bolt might need replacing are general wear and tear or loss. This bolt is located fairly close to the outside of the engine, making it more susceptible to the elements. Over time, the bolt may corrode and will need replacing. If lost while making a repair to the fuel bowl itself, the fuel bowl bolt will need to be replaced. Use a wrench to make the repair. This fuel bowl bolt is a top of the line replacement part for Bolens, Yard Machines, MTD, Troy-Bilt, Huskee, and Yard Man appliances. This part does not include any additional hardware, as it ships individually.

The fuel drain plug gasket creates a solid, leak-proof seal in the fuel drain. The gasket goes into the connection between the drain and the fuel tank. In the event that this gasket fails, there could be fuel leakage from the equipment that could be costly or even dangerous. Make sure to inspect and replace all gaskets regularly to ensure that the engine is working efficiently. This gasket is made of durable rubber material and is simple to install. drain the fuel to provide access to the drain plug and the fuel line without spilling fuel everywhere. Always wear gloves and make sure to disconnect the spark plug or disable the engine before working on any outdoor power equipment. This OEM replacement fuel drain plug is compatible with several tillers, snowblowers, lawnmowers, tractors, and other outdoor power equipment made by Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut. Sold individually.

This carburetor insulator is a genuine MTD replacement part for appliances with small engines, such as lawn mowers, lawn tractors, lawn trimmers, snowblowers, chipper shredders, tillers, and leaf blowers. The purpose of a carburetor insulator is to keep the heat of the running engine away from the carburetor, which combines the air and fuel that ignites the engine. This keeps the engine from overheating and suffering damage as a result.While there is a chance that a damaged carburetor insulator could prevent the engine from igniting altogether, it is more likely that a damaged carburetor insulator will allow for unmetered air leaks into the carburetor. Unmetered air leaks will cause the engine to take in more fuel, reducing the fuel economy of a small engine appliance. For this reason, if the symptoms align with a diagnosis of a damaged carburetor insulator, it must be individually replaced as soon as possible before using the small engine lawn appliance again.This carburetor insulator is compatible with the following brands: MTD, Cub Cadet, Yard Machines, and Craftsman.

This is a genuine carburetor insulator gasket that is designed to fit select models of lawn mowers. The carburetor insulator gasket is responsible for insulating the carburetor to create a strong seal between it and the engine block and insulate it from the excess heat. This gasket is subject to constant pressure and extreme heat, which can cause it to compress, warp, or become otherwise damaged as a result of regular use. Gaskets should be on the routine maintenance schedule and should be inspected every time other repairs are performed. Without functional gaskets, the engine may run poorly or may not run at all. This genuine OEM carburetor gasket is manufactured by MTD. It can be used in select machines from this brand, as well as those from Troy-Bilt, Cub Cadet, HUSKEE, Yard Man, and Yard Machines. There are hundreds of compatible units that take this gasket. The gasket is made of durable composite materials and sold as an individual unit. Hardware and additional components will require another purchase. Be sure to allow the engine to cool and use the appropriate tools for proper installation without damaging the gasket. Always drain the fuel system before working on the carburetor or internal engine components.

This is a carburetor stud for a lawn mower or tiller engine. A carburetor stud enables the carburetor to stay sealed to the intake manifold. They prevent threads from stripping in the metal manifolds and keep the carburetor perfectly aligned. This is an OEM part sourced directly from the manufacturer and is sold individually. When cleaning a carburetor, the user will need to remove the studs. Do not use vice grips when removing a stud, as this will strip the threads. A trick is to put two nuts on the threads and then hold a wrench behind the back nut. Tighten the closest nut, and then use another wrench or impact gun to reverse the stud out. This also works in reverse for replacing it with a new stud to properly place the carburetor so that it seals to the manifold.This part is compatible with several brands, including Bolens, Cub Cadet, Husky, Troy-Bilt, Yard Machines, and Yard Man.

This part is a replacement rocker arm stud. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended for use as a replacement for a broken or defective rocker arm stud on various types of outdoor small engine power equipment. This rocker arm stud works by securing the cylinder head. The rocker itself slides over the stud and is then held securely by the nut that locks it into place. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this rocker arm stud, the appropriate owner's manual and equipment diagrams should be referenced. This rocker arm stud is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with lawnmowers, blowers, and tillers that have been manufactured by MTD, Yard Machines, Cub Cadet, Bolens, Husky, and Troy-Bilt.

This is a valve adjusting nut that is an integral part of many different types of lawn and garden equipment, such as lawnmowers, trimmers, and snowblowers. The location of the part will vary based on the model. Users can refer to the equipment's diagram to determine where the component is located. The nut acts as a fastener and is made of durable metal. However, it can be damaged, may break, or become lost and will need to be replaced.If the valve adjusting nut is damaged or missing, it will need to be replaced. A pair of work gloves and basic tools will be needed for the process. Take the lawn and garden equipment and place it on a level surface before removing the spark plug wire. Access the location of the nut and remove it before installing the new replacement part.This is a genuine OEM replacement part that is directly sourced from the manufacturer. The valve adjusting nut is sold as an individual item. The part is made to be compatible with snowblowers, lawnmowers, string trimmers, leaf blowers, edgers, log splitters, wood chippers, and tillers manufactured by MTD, Troy-Bilt, Yard Machines, Craftsman, Cub Cadet, Huskee, MasterCut, and Yard-Man.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

This spark arrestor is a genuine MTD part. It is a replacement part for lawn mowers, log splitters, and walk-behind mowers. The spark arrestor is an important safety feature, and it is illegal to sell or operate a machine without one.This part arrests or extinguishes sparks that are created by the engine and other components while the mower is in use. It prevents fires, and mowers should never be used without one.This spark arrestor is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, MasterCut, Bolens, Cub Cadet, Husky, MTD, Troy-Bilt, and Yard-Man.

This genuine replacement part is a self-tapping screw. A self-tapping screw is a small screw that taps into place with relative ease. Lawnmowers have many screws that secure a variety of different parts. Whether they hold the housing of the various mechanical components or are used as mounting screws for other various parts, self-tapping screws are essential in holding all the different parts of the mower together. Over time, self-tapping screws that are exposed to the elements can rust and deteriorate. If they become too damaged, they might no longer do their job effectively and will need to be replaced. Luckily replacing these screws is a very simple process. To replace the screws, simply unthread the damaged screws and replace them with the new self-tapping screws. If the screws are stripped or too corroded to be removed, consider prying them out with a screwdriver or using a pair of needlenose pliers to rotate them out of their position. This OEM part is sold individually and is compatible with MTD brand mowers.

This push rod kit is a genuine MTD part, sold individually. This push rod kit can be used as a replacement part in a lawnmower. This kit comes with a variety of push rods in various shapes and sizes, perfect for the replacement or repair of a push rod within the internal machinery of the lawnmower. The push rods could be dented, punctured, scraped, cracked, warped, or eroded, and if this occurs to the point of reduced or no efficacy, the push rod kit should be ordered as a genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This push rod kit is compatible with the following outdoor appliance brands: MTD, Bolens, Yard-Man, Yard Machines, Troy-Bilt, Cub Cadet, and Husky.

This piston ring set is a genuine MTD part, sold individually. This piston ring set can be used as a replacement part in a variety of outdoor appliances including lawn mowers, snowblowers, and tillers. The piston ring set comes with a variety of differently sized and shaped piston rings, which seal off the area surrounding the pistons.If the piston rings of an outdoor appliances are suffering from damage in the form of puncturing, tearing, ripping, cracking, denting, or eroding, this set can be ordered as a genuine OEM replacement part. The replacement of the broken or malfunctioning piston rings should be performed in accordance with the proper instructions from a relevant appliance manual.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This piston ring set is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard Man.

This authentic OEM replacement part is a fuel line kit for a lawn mower. The fuel line is arguably the first stage in a combustion engine. Before the engine can ever start, fuel first has to come from the tank to the carburetor via the fuel line. The fuel line runs from the inside of a fuel tank and into the carburetor. It attaches to the side of the lawn mower using two small metal clamps. Fuel lines are almost always made of either vinyl or rubber and, because of their location on the outside of the lawn mower, they can easily snag on something and tear. If the fuel line tears, gasoline will begin leaking from the fuel tank and pose a potential fire risk. Fortunately, changing out a fuel line is easy. With a pair of needle-nose pliers, pull the damaged fuel line from the carburetor and out through the fuel tank. Reinsert the new line and clamp it down to the mower. This high-quality part is compatible with MTD, Cub Cadet, Yard Man, Troy-Bilt, Bolens, and Yard Machines lawn mowers. It is sourced from the original manufacturer and includes a hose and two metal clamps.

This recoil spring and pulley assembly is used in a variety of small gasoline engines that power devices such as mowers, lawn tractors, and log splitters, among other yard and landscaping devices. The assembly works by tightly coiling the spring in the starter housing. When the starter rope is pulled, the tension on the spring is suddenly released, creating a spark that fires the air/fuel mixture. The combustion starts the engine. The constant tightening and releasing of the tension at times will cause wear on the spring, resulting in the need to replace the spring and pulley assembly. To replace the recoil starter assembly, begin by removing the housing. Next, untie or starter rope and check to see if it is frayed and needs to be replaced as well. Remove the old assembly and install the new unit. Remember when re-tensioning the spring to wind the pulley in the opposite direction. Holding the pulley tightly so the spring does not release, attach the cap. Reattach the rope and coil it around the pulley. It is advisable to wear gloves for this task because the pulley and springs have sharp edges. This OEM certified replacement assembly is compatible with Yard-Man, Husky, Cub Cadet, MTD, Yard Machines, and Troy-Bilt yard equipment.