Parts for Craftsman 41AR4BEG799: Engine Assembly Parts

This muffler assembly is a genuine MTD part, sold individually. This muffler assembly can be used as a replacement part in a leaf blower. The purpose of the muffler assembly in a lawnmower is twofold: the muffler assembly both reduces the noise and vibration during use and protects the appliance from the possible damage of accumulated external materials in and around the appliance, such as rocks, dirt, pebbles, and debris.If the muffler assembly can no longer reduce the noise of the appliance while in use or if the muffler assembly has been cracked, dented, punctured, or otherwise seriously damaged, the muffler assembly should be removed and replaced by this genuine OEM replacement part as soon as possible.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This muffler assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Yard-Man, and Troy-Bilt.

This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for outdoor appliances with small engines such as string trimmers and leaf blowers. This spark plug provides an ignition source for the engine.The spark plug might have to be replaced at some point in the standard lifespan of the appliance if it suffers enough damage to render it useless. The spark plug might be cracked, punctured, or eroded enough to reduce its functionality. If this occurs, the spark plug should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: MTD and Craftsman.

This replacement part is an insulator gasket. Insulator gaskets isolate the metal surfaces of a flanged joint, electrically insulating them.A new insulator gasket might be needed if the current one is damaged in any way. If the engine struggles to turn on or does not start at all, it might be due to a damaged or malfunctioning insulator gasket. When replacing this part, be sure that the engine is completely powered off and cooled down.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This is a screw that is used for many pieces of lawn and garden equipment in a host of different ways. Screws such as this one are used to hold two components together. If the screw is not affixed properly or if there is an issue with the screw itself, it could affect the stability of the machine. If it is missing or not tight, it might also result in added noise when the machine is in use.Screws are made from metal and can last for a long time. However, if the threads are stripped or if the head of a screw wears down, it should be replaced. There is also the chance of corrosion or of losing the screw when working on the machine.This part is sold individually, and it can work well for a range of different machines from MTD, Craftsman, Bolens, and Yard Machines. This is a genuine OEM replacement part that is from the manufacturer.

This replacement part is a gasket assembly. This is a genuine replacement part made by MTD. This part is important to the overall workings of the engine as the gasket assists the engine in running properly and efficiently during use. A new gasket assembly might be needed if the current one is no longer working. If the user notices any unusual noises coming from inside the engine, it could be the gasket unable to operate properly. This can be due to normal wear and tear over time or an isolated incident that may have caused damage. Work gloves are recommended when working with parts near the engine to prevent injury. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a genuine replacement O-ring, which is a standard part on a number of engines. This O-ring is specifically designed as a replacement for the one found in the carburetor on select lawn and garden engines. The O-ring is designed to create a seal in the carburetor to ensure optimal performance and prevent leaks. It is also designed to help create the right amount of pressure. Over time, O-rings can become corroded, worn, or damaged due to their exposure to pressure and high heat. If they become broken or damaged, they can result in poor engine performance or even total engine failure. This genuine OEM O-ring is manufactured by RYOBI and compatible with a number of tillers, trimmers, and blowers from this brand. It is also designed for use with select models from Bolens, Yard Man, MTD, and Troy-Bilt. There are more than 150 models that can use this specific O-ring. It is made of durable materials and sold as an individual unit. Keep in mind that because O-rings have multiple applications and engines may have more than one type, it is important to double-check the location and application of the part to ensure the right one is being used.

This part is a replacement air cleaner assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended for use as a replacement for a broken, worn, or defective air cleaner assembly on various models of blowers. This air cleaner assembly includes the base, cover, and the foam air filter itself. This part helps to make sure that dirt, debris, and contaminants are filtered out of the air as it enters the engine so it doesn't have a negative effect on the equipment. Air filters should be cleaned regularly and replaced when worn or old. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this air filter assembly, the appropriate owner's manual and equipment diagrams should be referenced. This air filter assembly is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with blower models that have been manufactured by MTD and Craftsman.

This air filter can be used as a replacement for the small engine of a leaf blower or a leaf vacuum. The function of an air filter is to prevent the engine from accumulating dust, debris, pebbles, and other small external materials picked up by the leaf blower or leaf vacuum in the process of operating the equipment.An air filter might have to be replaced if it suffers damage that prevents it from blocking external materials from entering the internal infrastructure of the appliance. An air filter that is damaged or needs replacement might clog with debris and prevent the engine from properly starting or might have tears and rips allowing dirt and debris to pass through the filter and cause internal damage to other components. If this is the case, the air filter must be immediately removed and replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD. It is sold individually. This air filter is compatible with the following brands: MTD, Troy-Bilt, and Craftsman.

This throttle cable is a genuine MTD part, sold individually. This throttle cable can be used as a replacement part for a leaf blower or a leaf vacuum. The purpose of the throttle cable in a leaf blower or a leaf vacuum is to regulate the speed of the appliance so the pace can be determine by the operator. If the throttle cable has suffered damage in the form of fraying, tearing, ripping, puncturing, or eroding over general wear and tear from long-term usage, the throttle cable should be removed and replaced by this genuine OEM replacement part before using the leaf blower or leaf vacuum again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This throttle cable is compatible with the following outdoor appliance brands: MTD, Craftsman, Yard Man, Troy-Bilt and Cub Cadet.

This is a genuine replacement pawl assembly for select MTD engines. This pawl assembly attaches to the crankshaft in the motor. It is responsible for rotating the shaft and flywheel as a reaction to the recoil starter rope being pulled. The part is subject to constant motion and can wear down over time or otherwise fail. If the pawl assembly goes bad, the shaft and flywheel will not be able to rotate and the engine will not run properly, if at all. A replacement part like this model will solve the problem for compatible units. This genuine OEM pawl is manufactured by MTD to exact standards to provide a fit for compatible machines from Troy-Bilt, MTD, Cub Cadet, and Yard Man, including blowers and trimmers. This pawl assembly includes the metal housing, two plastic pawls, and two springs, which makes it a complete part that requires no additional purchase. This unit is sold as an individual piece. Ensure the engine is cool prior to repair and wear gloves to ensure hand protection when working on the moving parts of the engine. Disconnect the spark plug to protect from accidental engine engagement, as well.

This is a genuine replacement oil plug that is found in certain trimmers, edgers, and blowers designed for outdoor use. The oil plug is used to seal and fill the oil in the engine. This part is a high-quality plastic piece that features threads for screwing it into place and an O-ring to create a strong seal to prevent leaks and ensure optimal engine pressure. The oil cap may become stripped or damaged over time, or the O-ring could become faulty. In either case, replacing the entire cap/plug is the easiest solution.This genuine OEM replacement oil plug is compatible with machines from Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet. The plug is sold individually and comes with the O-ring. There are no other parts or hardware included. No tools are required to replace this plug. Simply unscrew the old one and screw the new one into place once the O-ring has been put on the new plug. Wear gloves whenever engine work is being performed to ensure hand protection. The oil should be checked regularly in all machines, which is a good time to check the cap to ensure it isn't damaged or in need of replacement.

This replacement part is a short block and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by MTD. The short block is a type of engine that is commonly found in small appliances. This engine operates differently than a normal engine and requires other parts such as a gasket and cylinder heads that must be purchased separately. A new short block might be needed if the machine is not turning on, or is stopping abruptly while in use. It is possible that the short block might need to be replaced after years of normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by MTD.