Parts for Yard-Man 41BDY20C901: Engine Assembly Parts

This muffler cover assembly is a genuine MTD part, sold individually. This muffler cover assembly can be used as a replacement part in a variety of small engine outdoor appliances including tillers, string trimmers, and leaf blowers. The purpose of the muffler cover assembly is to provide a safe housing for the muffler so that the muffler does not suffer damage as the outdoor appliance is in operation.If the muffler cover assembly is punctured, torn, scraped, dented, warped, eroded, or otherwise damaged to the point that the muffler is exposed to potential damage, the muffler cover assembly should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This muffler cover assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Bolens, and Yard Man.

This particular air cleaner filter is made for gasoline-powered trimmers. If any piece of lawn equipment kicks up more dust and particulate than a lawn mower, it is a trimmer. Trimmer line, unlike a mower, does not maintain a constant angle. Because trimmers are also frequently used as edgers, they fill the air with dust and debris. While air cleaner filters are made of durable material, they eventually become clogged with yard waste to the point that they simply cannot be cleaned. Users know that this is happening when the trimmer will not run smoothly, or it cannot be started at all when no other problem is indicated. The filter is replaced by removing the back cover and discarding the old filter. Before putting it in place, work a few drops of two-cycle oil into the new filter. This will help the foam capture more airborne pollutants. Reverse the process to install the new filter. When the time comes to replace the air cleaner filter, it is imperative that the new filter be an OEM certified part that has been manufactured to the same specifications as the original.This part may be used on string trimmers, tillers, and leaf blowers by Craftsman, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Bolens, and Yard-Man.

This part is a replacement choke lever. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective choke lever in outdoor power equipment.The choke lever is important to the functionality of the choke, which enables the user to enrich the fuel mixture in an internal combustion engine. This lever will need to be replaced if broken, snapped, corroded, or otherwise faulty. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this choke lever, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this choke lever is suitable for use on several outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please This is a genuine part made of high-quality, durable materials and is sold individually.

This is a carburetor replacement designed for use on select lawn and garden equipment engines. The carburetor is responsible for taking in the air and fuel and creating the mixture of the two before sending them to the engine. The fuel and air are mixed in the inner chamber, and then passed onto the engine through a series of valves and diaphragms. Over time, the exposure to high heat, constant vibrations, and fuel can cause the various components of the carburetor to wear and need to be replaced. In some cases, it's best to replace the entire module rather than trying to replace individual components. The carburetor replacement is a genuine OEM product manufactured by RYOBI and designed for use in equipment from RYOBI, Bolens, Huskee, MTD, Yard Man, and Yard Machines. The carburetor assembly can be used with select gas-powered edger/trimmer models and blowers. It is sold as a complete assembly and includes one carburetor unit per purchase. Always drain the fuel system and allow the engine to cool completely before doing any work. To replace the carburetor, the rear cover and fuel lines will need to be removed and replaced once the old unit has been taken out and the new one replaced.

This is a genuine replacement for MTD engines in select models of lawn and garden equipment. The carburetor gasket is situated between the carburetor body and the engine to provide a secure seal to keep air from leaking out. The engine needs proper compression to run and that is ensured by gaskets and seals like this one. Over time, however, these are exposed to constant heat and pressure and can shrink or become damaged as a result. Replacing gaskets is typically considered a part of routine maintenance on most equipment. Gaskets should be replaced immediately when they fail, and inspected any time work is done on the carburetor. This OEM carburetor gasket is designed to work with more than 150 different models of blowers, trimmers, cultivators, and edgers. It can be used in products from brands like MTD, RYOBI, Bolens, Troy-Bilt, Cub Cadet, Husky, Yard Man, and Yard Machines. The gasket is made of durable metal material and is sold as a single unit. Hardware is not included with this item. Be sure to cool the engine before performing repairs and drain the fuel system to prevent leaks and spills when working on the carburetor and its components.

A carburetor may dry up after prolonged periods of inactivity, causing problems starting the engine. If this happens, the carburetor will need to be primed. Priming is adding fuel to the carburetor. Most lawnmowers have a priming bulb so you don't have to pour gas into the carburetor manually. This component is usually a small rubber button, which suctions fuel from the tank. To activate it, simply press it several times. If it fails to draw fuel, then a primer bulb may be needed. Primer bulbs can deteriorate due to old age, repeated use, and exposure to chemicals and the environment. For worry-free machine compatibility, choose this Primer Bulb & Hose Assembly made by MTD. It will work with trimmers, leaf blowers, and string trimmers from MTD, Bolens, Yard-Man, Craftsman, Ryobi, and Huskee. The assembly comes with one primer bulb and one hose. Extra fuel lines are available but sold separately.

This fuel cap assembly fits on the lawn tractor fuel tank to keep the fuel inside and debris outside. The part is red and has a gas pump embossed on it for added identification. The top of the cap also features vent slots to allow hot air to escape and prevent heat expansion. It features a gasket under the cap to keep gas from sloshing out during operation. The fuel cap assembly is made of heavy-duty plastic that can fade and crack due to the elements. Removal and replacement are as simple as taking the old cap off and putting the new cap on. Hand-tighten to prevent gas from leaking. Never over-fill the fuel tank. Leave room for the oil additive if it is not mixed before fueling. This fuel cap assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual unit. This fuel cap is designed for use in lawnmowers and lawn tractors manufactured by MTD, Ryobi, Troy-Bilt, Bolens, Yard-Man Yard Machines, Cub Cadet, and Murray.

This replacement screw is useful for many different types of handheld outdoor equipment. Screws are used as a means to hold parts of the machine together. The screws also help to reduce the amount of vibration that occurs in the machine.These screws are used in outdoor equipment, so there is a chance they could corrode over time. In some cases, the screws may also lose their thread, or the heads of the screws could start to become worn down. Owners who notice issues with the screws, or who notice a missing screw should replace them to ensure the proper function of the machine. Failure to replace damaged screws could result in more difficulty replacing them after they wear down further.The screw works on various types of equipment including blowers and trimmers. It is compatible with a range of brands including Murray, Craftsman, Yard Machines, Bolens, Yard-Man, Craftsman, Ryobi, and McCulloch. This is a genuine OEM part sourced from the manufacturer, and it is sold individually.

The clutch assembly uses centrifugal force to connect the shafts and create the drive shaft motion that powers the machine. The drive shaft nests inside the other shaft, and over time these parts can wear and become damaged with regular use. Today's parts can even continue to function long past when they should, so it may not be apparent that a clutch assembly needs to be replaced until the entire unit is bad. If the engine is not performing as it should or if the drive shaft seems unstable, it may be time to replace the clutch assembly. This genuine OEM part includes everything needed for the job. This OEM clutch replacement is designed for use with various cultivators, edgers, and trimmers. It can be used on machines from MTD, RYOBI, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, Murray, and Husky. This assembly includes the clutch, clutch drum, washer, and left-hand threaded screw. Always disengage the spark plug and allow the engine to cool completely before beginning repairs.

Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.

This is a genuine replacement screw designed for use in select MTD engines on lawn and garden equipment. Specifically, this is an anti-rotation screw, which is used to stop the drive shaft housing from turning inside of the main housing assembly. This screw is a small part that is subject to constant vibrations, pressure, and high temperatures. It can sometimes become worn or damaged as a result or even break off entirely, which would mean that the inner housing would no longer be held in place accordingly. If this screw is damaged or lost, it needs to be replaced with a genuine OEM replacement as soon as possible. This MTD anti-rotation screw is manufactured with high-quality materials and designed for use in select trimmers from MTD, RYOBI, Yard-Man, Troy-Bilt, Murray, Cub Cadet, Yard Machines, and Bolens. This replacement will require a screwdriver. Simply remove the damaged screw, if it is not already missing, from the clutch cover assembly, and then install the new screw. It should only take a few minutes to perform the replacement. Be sure to wear gloves to protect the hands. This screw is sold individually and does not include any additional parts or hardware.

This is a genuine ignition module, also known as an ignition coil, that is designed to be used on select line trimmers. The ignition module is what connects the spark plug to the machine and is responsible for creating the spark and carrying that power back to the engine to power the unit. if the ignition module fails, the engine will not be able to start. It could start and stop, or it could fail to start entirely. Either way, replacing the ignition module will resolve the issue in most cases and can be done with this OEM part. Since it's attached to the spark plug, it's a good idea to inspect the module during regular spark plug replacement and other maintenance to check for damage. The ignition module is made from durable metal and rubber materials and is sold as an individual part. It will require a screwdriver and socket set to replace the part. Be sure to wear gloves to protect the hands and disconnect the power for safety before doing any work on electrical components like this.

This is a spark plug that is used in many types of lawn and garden equipment, such as leaf blowers and tillers. It is a part of the main working of the tool and ensures the motor can run so the equipment can be used. The purpose of the spark plug is to ignite a mixture of air and fuel found inside the combustion chamber of the engine. If this part is damaged or has been lost, the engine will no longer start so the spark plug will need to be replaced.If the spark plug needs to be replaced, work gloves and basic tools may be needed. Move the tool to a level surface and make sure it is turned off. Disconnect the spark plug wire before removing it. Use a spark plug gauge to adjust the gap before installing the new part and using the tool.This part is designed to be compatible with trimmers, tillers, and leaf blowers manufactured by MTD, Ryobi, Yard-Man, and Troy-Bilt. The spark plug is sold as an individual part. It is a genuine OEM replacement component that is directly sourced from the manufacturer.

This muffler assembly is a genuine MTD part, sold individually. A muffler assembly can be used as a replacement part in a string trimmer or a leaf blower. The purpose of this genuine OEM part for one of these outdoor appliances is to reduce noise made by the motor while the blower in use.The muffler assembly in a string trimmer or a leaf blower can become damaged throughout its typical lifespan, and if this damage necessitates a complete replacement of the part, the muffler assembly should be removed and replaced with this genuine OEM replacement part as soon as possible. This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This muffler assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, and Yard Man.