Need Help?
Call or text
Show parts
This exhaust tube assembly is a genuine MTD part, sold individually. This exhaust tube assembly can be used as a replacement part in a lawn mower. The purpose of the exhaust tube assembly in a lawn mower, also known as an exhaust pipe, is to provide a safe channel for the burned gas used up by the lawn mower to exit the appliance and pass back out into the air, where it is blown out of the way of the operator for safe use.If exhaust is not being channeled out of the exhaust tube, if flames are coming out of the exhaust tube, or if there is excessive noise and vibration coming from the area of the exhaust tube, the exhaust tube should be replaced by this genuine OEM replacement part. Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This exhaust tube assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Murray, Yard Machines, and Yard Man.
Usually ships within 4 - 14 days
A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.
This is a genuine replacement self-tapping hex screw with a blunt nose designed for lawn mowers and lawn tractors. It is used in a variety of locations for the engine assembly of lawn mowers. The self-tapping feature allows the metal screw threads to tightly secure to other metal. The blunt nose requires the use of a pre-drilled pilot hole smaller than the diameter of the screw. These screws do not interchange well. Be sure to check the owner's manual to ensure the correct part number. The hex head needs a socket wrench for the easiest removal and replacement. When removing this type of screw, stripped threads can occur. If this happens, use a screw of the same type in a slightly larger size to accommodate for the damage. Typically, this type of screw would need to be replaced when removed to access another part of the lawn mower for replacement, such as the carburetor. This an OEM part sourced directly from the manufacturer and is sold individually. This screw fits products by Bolens, Brute, Columbia, County Line, Craftsman, Cub Cadet, Huskee, Huskee Supreme, MTD Black, MTD Gold, Mastercut, Murray, Troy Bilt, Yard Man, & Yard Machines.
This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.
A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.
This PTO clutch is a genuine MTD part, sold individually. This PTO clutch can be used as a replacement part in a lawn mower. The purpose of the PTO clutch in a lawn mower is to take the electrical voltage that is transmitted through a spark and to use it to engage the blades so that the blades rotate and chop through greenery while the appliance is in use.The PTO clutch in a lawn mower might need to be replaced at some point within the typical lifespan of a lawn mower; the PTO clutch could be short circuited, punctured, dented, cracked, or exposed to the elements in such a way that renders its functionality and efficacy reduced or negated. If this occurs, the PTO clutch should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This PTO clutch is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Murray, Yard Machines, Yard Man, and MasterCut.
The exhaust systems on lawn and garden equipment are just as important as those on a vehicle. They need a good seal to prevent a leak between the carburetor and the exhaust tube, which would allow air leakage that could cause performance issues and loud noise. Over time all exhaust gaskets deteriorate and require a full replacement. It is relatively easy to replace an exhaust gasket and requires only the use of screw drivers, a socket set or a wrench set depending on the device being service. Replacement components such as sockets or screws may also be required during this repair. The gasket surfaces should be cleaned and fully dried before being installed between the carburetor and the exhaust tube. This exhaust gasket works with Toro, Simplicity, Murray and Briggs & Stratton lawnmowers, generators, snowblowers, wood chippers, and lawn tractors. It also works with equipment made by Craftsman, Husqvarna, Cub Cadet, Poulan, Wheel Horse, MTD, Ariens, and more.
This replacement part is a washer. This is a genuine replacement part made by MTD. A washer is a small part but important to the overall workings of the machine. Washers work with other small pieces such as nuts and screws to keep parts in place and in proper working order.A new washer might be needed if the current one is missing or damaged in any way. This can be caused by normal wear and tear. Washers may experience a large amount of friction over time and can become stripped down after a while. If this is the case, be sure the replace the part as it might not be as effective as during prior uses. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.
This replacement part is a flat washer, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. A flat washer is found in many types of appliances and machinery in general. Typically washers are used to increase the size of any screw's bearing surface area. This in turn reduces the surface pressure applied on the object and allows the entire machine to run smoothly and efficiently. A new washer might be needed if the user notices that the current ones are damaged or missing. Because pressure is often put on the washers it is common that they become stripped overtime. Be sure to purchase the correct amount as many different machines require more than one washers. Be sure to reference the owner's manual for more specific information on how to replace the parts. This is a genuine OEM replacement part sourced directly from the manufacturer and is sold individually.
This is a replacement throttle cable that is designed for use with select lawn tractors. The throttle cable is what controls the speed of the engine. When the metal lever is engaged, the machine will shift into high or low gear. The durable metal part is subject to constant vibrations and repetitive motion, and could break or become worn over time. It is also attached to a cable that is made of durable rubber and metal materials, which connect to the engine to control the opening and closing of the throttle. This cable can also become worn, brittle, or damaged over time and will need to be replaced. The entire piece is sold as a single unit and does not include any other parts or hardware. This genuine throttle cable is manufactured to OEM standards by MTD. It is compatible with machines from MTD, as well as those from Troy-Bilt, Murray, and Yard Man. Be sure to allow the mower to cool completely and disengage the engine before performing any repairs. Wear gloves for hand protection, as well.
This muffler is a genuine OEM replacement part sourced directly from the manufacturer for use on lawn and garden equipment. It reduces the noise coming from the exhaust. Being a metal part exposed to the elements, it is not uncommon for mufflers to corrode over time and need replacement. As a lawnmower part, the muffler may sustain damage from debris in the yard while mowing. In either case, the muffler should be removed and replaced to keep the noise level to a minimum.The engine and damaged muffler should be cool to the touch before repairing the lawnmower. Wear work gloves and safety goggles. Remove the spark plug from the lawnmower for extra safety. Locate the bolts securing the muffler to the lawnmower and loosen them to remove the muffler. Dispose of the old muffler and align the new muffler with the bolts. Attach the new muffler and tighten the nuts. Put the spark plug back in the lawnmower. This muffler is a high-quality metal part that is individually sold. It does not come with hardware. It is designed for use on lawn mowers and lawn tractors manufactured by MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Poulan, and Husky.
This is a genuine drive pulley replacement that is designed to be used in select models of lawn mowers and tractors. The drive pulley is what holds the drive belt and allows it to operate to turn the engine over and allow the machine to operate properly. This durable metal part can become worn over time due to the repetitive spinning motion. It could also get knocked loose or face other damage that would require a replacement. This genuine OEM drive pulley is manufactured to provide an exact fit for compatible units from MTD, Troy-Bilt, Cub Cadet, Yard Man, and others. The drive pulley is sold as an individual unit and there is no hardware included. Owners will want to inspect the drive belt and other pulleys when replacing the drive pulley to ensure that everything else is in good working order. When working on the internal engine components of tractors, it is always advised to wear gloves and eye protection. Owners should also disengage the engine power supply to ensure a safe repair, and perform all work in a well-ventilated area.
The Hex Head Self-Tapping Screw is an OEM part for MTD outdoor power equipment. This screw is designed to securely fasten components of your equipment, providing reliable and durable connections. The thread size is 5/16 inches for major diameter, with 18 threads. The screw is 3/4 inches long and has a hexagonal or six-sided head.
Over time, the Hex Head Self-Tapping Screw can become damaged due to corrosion, stripping of the threads, or wear from frequent tightening and loosening. This can compromise the integrity of the connections and potentially lead to equipment malfunction.
Symptoms of a bad Hex Head Self-Tapping Screw include:
This OEM replacement part is designed for use with various models of MTD outdoor power equipment.