Parts for Cub Cadet 17AI2ACP756: Engine Connections Parts

This wire harness assembly is an authentic OEM replacement part sourced directly from the manufacturer. It is the grouping of wires and electrical cables needed to power the lawnmower and other lawn and garden equipment. The harness holds all the wiring together in one area. If this assembly becomes damaged due to debris from the lawnmower or even being chewed through by animals while the machine is stored, it will have to be replaced in order for the machine to run.This project requires a screwdriver, socket set, pliers, and wire cutters and strippers. This will take between one and two hours, depending on your skill level. Remove the fender to get access to the harness. Remove the battery and disconnect all electrical connections on the machine. Next, remove the harness and install the new one. Reconnect all wires making sure to follow the process exactly so that the connections are correct. Reinstall the battery and fender. Check all components of the machine to make sure the connections are right.This wire harness assembly is sold individually. It is designed for use in lawnmowers and other small engines manufactured by Troy-Bilt and MTD.

A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.

This is a genuine replacement self-tapping hex screw with a blunt nose designed for lawn mowers and lawn tractors. It is used in a variety of locations for the engine assembly of lawn mowers. The self-tapping feature allows the metal screw threads to tightly secure to other metal. The blunt nose requires the use of a pre-drilled pilot hole smaller than the diameter of the screw. These screws do not interchange well. Be sure to check the owner's manual to ensure the correct part number. The hex head needs a socket wrench for the easiest removal and replacement. When removing this type of screw, stripped threads can occur. If this happens, use a screw of the same type in a slightly larger size to accommodate for the damage. Typically, this type of screw would need to be replaced when removed to access another part of the lawn mower for replacement, such as the carburetor. This an OEM part sourced directly from the manufacturer and is sold individually. This screw fits products by Bolens, Brute, Columbia, County Line, Craftsman, Cub Cadet, Huskee, Huskee Supreme, MTD Black, MTD Gold, Mastercut, Murray, Troy Bilt, Yard Man, & Yard Machines.

This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.

This genuine MTD replacement part is an electric PTO clutch assembly for use with lawn mowers and lawn tractors. A properly functioning clutch is essential for the safe and reliable use of a lawn mower or tractor. The clutch engages the mower drive pulley to engage the blades. The clutch may become worn out or damaged with extended use, necessitating replacement. Remember to check the clutch assembly periodically to spot any wear or damage. This part is an identical replacement for a clutch that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with Yard Man, Troy-Bilt, Cub Cadet, MTD, and more lawn tractors and mowers. Please note: original part numbers 1620191, 717-04183, 717-04622, and 917-04183 are now obsolete, and manufacturer has replaced the original part numbers with this part.

This replacement part is a washer. This is a genuine replacement part made by MTD. A washer is a small part but important to the overall workings of the machine. Washers work with other small pieces such as nuts and screws to keep parts in place and in proper working order.A new washer might be needed if the current one is missing or damaged in any way. This can be caused by normal wear and tear. Washers may experience a large amount of friction over time and can become stripped down after a while. If this is the case, be sure the replace the part as it might not be as effective as during prior uses. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

The muffler on lawnmowers prevents neighbors from becoming overly upset when the grass is cut early in the morning. When the engine starts on the lawnmower, the combustion releases burnt gas, making a very loud noise. The muffler dissipates the noise to make the lawnmower run more quietly. Over time, heat from the exhaust and constant exposure to the elements may cause the muffler to rust and possibly have holes that increase the noise. If this happens, the muffler should be removed and replaced to keep the noise to a minimum. Wait for the engine to cool so that the muffler is cool to the touch. Wear work gloves and have a socket set and adjustable wrench available. Remove the muffler screws and set them aside to use on the new muffler. Remove the damaged muffler from the mounting bracket. Install the new muffler on the mounting bracket using the mounting screws from the old muffler. Tighten the screws and start the lawnmower to ensure the muffler is installed correctly. This muffler is a silver metal part that is sold as one unit. It does not come with attachment screws. It is designed for use on lawn mowers manufactured by MTD, Ryobi, Yard Machines, Bolens, Yard Man, Troy-Bilt, and Husky.