Parts for Poulan PR65Y21MB: Engine / Handle / Housing Parts

Replace your lawn mower's engine zone control cable. Installs between handle and engine to engage/disengage blade operation. Order new cable if broken or frayed.

Replacement handle bolt for lawn mowers and outdoor power equipment. Secures upper and lower handles together. Replace if damaged, stripped, or missing.

This T-handle bolt is a genuine MTD part, sold individually. This T-handle bolt can be used as a replacement part in the engine of a lawn mower or an edger. The purpose of the T-handle bolt is to work in conjunction with band clamps or straps with the intention of maintaining the placement of fuel tanks and other components.The T-handle bolt might have to be replaced at some point within the standard lifespan of the appliance in the event that it cannot perform its function as usual. This could occur as a result of general wear and tear from long-term usage or from a direct impact collision with a hard object such as a rock or a curb. If this occurs and the T-handle bolt is stripped beyond functionality or otherwise punctured or eroded, the component should be removed and replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This T-handle bolt is compatible with the following outdoor appliance brands: MTD and Craftsman.

Hairpin cotter pin clip secures components on shafts in walk-behind lawn mowers. Replace if bent, broken, or missing to properly retain parts.

Replacement rear door kit for walk behind lawn mowers. Installs at the rear discharge chute to direct clippings into the bag. Needed when cracked or broken.

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

Secures hinged components on your walk-behind lawn mower. Replace if screw is stripped, missing, or damaged. Essential hardware for proper assembly.

Fix lawn mower that won't drive or has weak self-propel with this engine pulley. Common repair for transmission power issues. Moderate difficulty.

Flanged hex nut for lawn tractors and outdoor power equipment. Replace if threads are stripped, nut is missing, or hardware has corroded or loosened.

Replace cracked or worn 9x2 black rear wheels on your walk-behind lawn mower. This non-drive wheel installs on the axle for smooth rolling and stability.

Attaches to the height adjuster lever to set your mower deck cutting height. Replace if cracked, broken, or missing for proper deck adjustment control.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.

Uneven lawn cuts or poor mulching? This walk-behind mower blade restores clean cutting performance. Simple DIY replacement in under 30 minutes.

Replacement discharge chute deflector for walk behind lawn mowers. Mounts to side discharge opening. Replaces cracked, broken, or missing deflectors.

Hinge bracket assembly for walk-behind lawn mowers. Mounts to mower deck to support hinged components. Replace if bracket is bent, cracked, or broken.

Hinge rod for walk-behind mower discharge chutes. Allows chute to pivot while staying attached. Replace if bent, broken, or missing to secure chute.

Replace a broken throttle control if your mower won't adjust speed or power settings properly. Connects to engine to regulate performance during use.

Secures control cables in proper position for safe operation. Replace if cable routing becomes loose or clamp breaks. Verify fit with your model number.

Replace a lost, stripped, or damaged hex screw fastener in your lawn mower or string trimmer. Secures components and panels for proper assembly.

Regular maintenance like oil changes and air filter and spark plug replacements can make a lawnmower easier to start and perform at its best. A Midwest Engine 5140B OEM Maintenance Kit can help. This kit includes everything needed to maintain the efficiency of a lawnmower: an 18oz bottle of Briggs & Stratton SAE 30 Small Engine Oil, an air filter, a spark plug, and fuel treatment. This genuine Midwest Engine Maintenance Kit is best for Poulan rotary mower and lawnmower models. It is also suitable for equipment like a wood chipper, tiller, or pressure washer and is sold individually.