Engine Hose, Tube & Fitting

A fuel inlet is a connector that allows gasoline from the fuel line of an engine to pass through it into the carburetor. Once in the carburetor, the fuel mixes with air and passes into the cylinder, where it ignites to create power for the engine. Thus, the fuel inlet is attached on the one side the carburetor and to the fuel pipe, or line, on the other. This inlet is used in power tools such as lawn mowers, snowblowers, edgers, pressure washers, chippers, and generators. Periodically, since it is made partially of plastic, the fuel inlet will weather and crack so that it is no longer fuel tight. The main sign to watch out for with fuel inlets is gasoline leakage. This is always a dangerous situation. The user may have to remove the carburetor housing cover to determine whether the leak comes from the fuel line or the inlet valve. It is a good idea to replace each of these pieces at the same time. When choosing a replacement part for the fuel inlet, always use a genuine OEM replacement part like this one. This inlet is compatible with power tools made by Tecumseh, Briggs & Stratton, Toro, MTD, Lawn-Boy, and Cub Cadet.

The fuel line is a simple rubber hose that delivers the fuel from the fuel tank to the carburetor where the fuel will then be mixed with air and sent forth into the engine to provide the power. All fuel lines deteriorate over time and the rubber can become hard or cracked with age. These hoses can also be damaged by breakage or puncture, and they need to be fixed as soon as possible. This OEM fuel line replacement can provide a solution for compatible equipment. Be sure to drain all fuel for safe replacement and allow the engine to cool before starting repairs. This fuel line is a genuine OEM replacement part that is compatible with Tecumseh, Briggs & Stratton, Craftsman, Toro, Lawn-Boy, Cub Cadet, Simplicity, and Snapper. It can replace broken or missing fuel lines in lawnmowers, snowblowers, pressure washers, generators, wood chippers, and other small engines that take this size and type of line. This fuel line is sold separately. Clamps or other hardware will have to be an additional purchase.

This is a fuel fitting that is part of the fuel assembly on many models of snowblowers and lawnmowers with engines. It's made of durable metal and plastic. The part is used to move fuel from the fuel tank into the engine carburetor. The fuel fitting is responsible for drawing the pressure needed to pump fuel so the lawn and garden equipment can operate. The fuel fitting can be damaged through use or impact and will no longer work as expected. If this occurs, the fuel fitting will need to be replaced.Depending on the equipment that contains the fuel fitting, tools for a replacement might include a pair of pliers, a screwdriver, and a hex key. If a visual inspection shows that the fuel fitting is cracked, turn off the equipment and disconnect the spark plug wire. Remove the fuel fitting from the carburetor and the fuel tank and replace it with a new part.This fuel fitting is designed to be used with lawn mowers and snowblowers manufactured by Lawn-Boy, Toro, Tecumseh, and Cub Cadet. It is sold as an individual part. This is a genuine OEM replacement part that is directly sourced from the manufacturer.

This breather tube is a genuine OEM replacement part sourced directly from the manufacturer. It is used on various lawn mowers and small engines to provide ventilation to the engine crankcase and prevent pressure buildup. It attaches to the cylinder assembly so that air can flow in and out and prevent damage to the engine. The breather tube on lawnmowers also has a reed that lubricates the pistons by collecting oil and sending it back to the crankcase. Over time, the breather tube may become dry and brittle, resulting in cracks. A damaged breather tube can lead to blown seals and gaskets, oil leaks, and reduced engine performance. Oil leaks are identified by bluish smoke coming from the exhaust, engine backfiring, or a decrease in overall performance. If this occurs, check the breather tube for clogs or damage. Replacing the breather tube requires a cooled-down muffler and screwdriver. Remove the muffler to reach the tube. Remove the screws holding the tube in place. Remove the tube and check for damage and clogs. Replace with a new tube if it is damaged. Reinstall the tube and screws. Reinstall the muffler. This breather tube is made of durable rubber and is sold as an individual part. The tube does not come with retaining screws. It is compatible with lawn mowers and small engines manufactured by Tecumseh, Toro, and Cub Cadet.

This part is a breather tube that is used on outdoor power equipment engines. This part collects oil that lubricates the piston and sends the collected oil back to the crankcase. It helps prevent the engine from overheating and also helps the engine perform at optimal levels.Signs that the breather tube needs to be replaced are if oil is leaking. If the breather tube is clogged and unable to function properly, this increases the pressure on the engine. It can cause blown gaskets and seals, which causes oil to leak. The operator may also notice excessive exhaust that is thick and black. The engine performance will also be lacking. Allow the engine time to cool down before accessing the breather tube.This breather tube is an OEM part that is sourced directly from the manufacturer and is sold as an individual part. It is compatible with outdoor power equipment engines that are manufactured by Tecumseh and MTD.