Engine Engine

This is a breather assembly that is made for use on many types of lawn and garden equipment. The breather is an important component that helps vent extra air from the crankcase of the engine. If the engine on the equipment is no longer running well, it could be caused by a malfunctioning or broken breather assembly. If this is the case, the part will need to be replaced.Several tools are needed to replace the breather assembly. These include a 7/16th-inch socket, a 3/8th-inch nut drive or socket, a Phillips head screwdriver, a 5/16th-inch nut drive or socket, a 3/8th-inch nut driver or socket, and a pair of pliers. The muffler will need to be removed to gain access to the breather assembly. It can be inspected for damage before being removed. A new part can be installed to get the engine running at its best.This breather assembly is a genuine OEM replacement part that is sourced directly from the manufacturer. It's sold as an individual component. This assembly is made for use with lawnmowers, chipper shredders, snowblowers, leaf blowers, generators, and pressure washers made by Briggs & Stratton, Cub Cadet, Toro, Craftsman, Lawn-Boy, and Simplicity.

Piston rings help to maintain the pressure between the piston and cylinder wall. If the compressed gas between these two parts begins to leak out, the engine will not be able to put out enough energy, and the lawn appliance will stop working. Piston rings can wear out over time due to engine overheating or faulty ignition in the engine. A telltale sign of a burnt-out piston ring is whitish-grey smoke coming from the appliance. Extreme oil inefficiency is another sign. This part is a genuine OEM part designed for Echo or Mantis handheld yard tools such as a chainsaw, hedge trimmer, leaf blower, edger, pole pruner, or tiller engine. It does not ship with other parts. Any additional parts needed to install the piston ring must be ordered independently.

This is a cylinder head used in several types of lawn and garden equipment. The cylinder head is the component that sits on top of the engine. It is responsible for closing the combustion chamber. The gap in between the head and the engine is filled with a head gasket. The cylinder head also helps ensure that the cylinder stays properly lubricated at all times. If the cylinder head has failed, it can cause dropped engine performance, low oil levels, and smoke may come from the exhaust.If the cylinder head needs to be replaced, the grass screen and shield will need to be removed. Take the bolts out of the engine cover before removing the cover. Remove the engine shroud and the bolts that hold the pump bracket to the head. The valve cover should be removed to find the cylinder head. Take the old one out and insert the new one before reassembling the equipment.This cylinder head is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The cylinder head is compatible with hedge trimmers, leaf blowers, and chipper shredders made by Shindaiwa, Mantis, and Echo.