Parts for Poulan 96142003200: Engine / Housing / Handle Parts

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

This is a handle knob for many brands of lawnmowers, snowblowers, or trimmers. It attaches to the upper or lower handle on adjustment levers. This genuine OEM handle knob is a frequently lost or broken component as it is on the exterior of the machine, used frequently, and often struck during use. It will need to be replaced if it becomes wobbly or refuses to remain firmly in place. The only tools required to install the authentic replacement part will be a rubber mallet and a 1/16 punch. It is threaded to easily install once the cap has been removed with the punch. Made of durable materials, it ships individually but may require the use of a handle bolt depending upon the machine it is being used to repair. It works on rotary lawnmowers as well as manually and self-propelled models from brands like Husqvarna, Poulan, Weed Eater, Ryobi, Murray, and Craftsman, among others.

This genuine Husqvarna part is a hairpin cotter intended for use with Poulan, Husqvarna and Weed Eater brand walk-behind lawn mowers. This hairpin cotter, also known as a clip or hinchpin, is used to secure a component on a shaft in the lawn mower . This part is shaped like a bobby pin with a single piece of metal formed into a large ring at the top end, and a "W" shape at the other. This is designed to work with the groove or hole at the tip of a hitch pin, where this pin will lock larger pins in place. This part is an identical replacement for an original carrier bracket that is damaged, faulty, or missing. This dependable bracket carrier is made of high quality durable metal.This is an OEM replacement part sourced directly from the manufacturer and is sold individually. For installation information or hardware requirements, please refer to the original product manual. This part is a suitable replacement for a hairpin cotter in products from Husqvarna, Poulan, Weed Eater, Craftsman, Murray, Ariens, Ryobi, and other brands.

This part is a replacement mulching plug. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a defective or broken mulching plug in various lawnmowers. The mulching plug is installed in the lawnmowers discharge chute and allows the user to switch the mower into mulching mode. In mulching mode, grass clippings will be turned into mulch and expelled, which can provide the lawn with extra nutrients. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this mulching plug, the appropriate owner's manual and equipment diagrams should be referred to. This mulching plug is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with lawnmowers that have been manufactured by Husqvarna and Poulan.

This replacement part is a discharge chute. This is a genuine replacement part made by Husqvarna. Discharge chutes are typically found in riding lawnmowers and help the grass clippings and debris get deposited in the correct area.A new discharge chute might be needed if the user notices the current chute is not working properly. If grass clippings, mulch, and other debris are being expelled out the wrong area, it might be due to a faulty discharge chute. Be sure to refer to the appropriate user manual before attempting to replace this part. Be sure the engine is completely shut down as there might still be debris logged in the previous chute. This discharge chute is sold individually and is sourced directly from the manufacturer. It is a genuine OEM replacement part which ensures a proper fit.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This part is a lower transmission spring. This lower transmission spring is an integral component needed for the self-propel or automatic drive function on outdoor power equipment. It is made of durable metal.A new lower transmission spring may be needed if the self-propel function is not working properly on a lawnmower or snow thrower. Another reason that a new lower transmission spring will be needed is if it is physically broken or damaged in any way. Sometimes the lower transmission spring needs to be replaced simply due to normal wear and tear after a long period of time and use. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This lower transmission screw is used on lawnmowers and snowthrowers manufactured by Husqvarna, Poulan, Weed Eater, and Jonsered.