Parts for Poulan PR55R21MCA: Engine / Housing / Handle / Bag Parts

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

A lock nut secures bolted joints with the creation of friction on the thread of the bolt. It prevents loosening of parts, which is a common occurence on lawn machines due to the tremendous amounts of vibration and wear, which can loosen connections between crucial components. This lock nut will prevent such issues. It will be necessary to have wrenches and other tools to make the repair or replacement. This OEM lock nut for Husqvarna and Craftsman fits garden machines that include tillers, lawnmowers, tractors, and other equipment. This durable part ships individually.

This genuine Husqvarna part is a hairpin cotter intended for use with Poulan, Husqvarna and Weed Eater brand walk-behind lawn mowers. This hairpin cotter, also known as a clip or hinchpin, is used to secure a component on a shaft in the lawn mower . This part is shaped like a bobby pin with a single piece of metal formed into a large ring at the top end, and a "W" shape at the other. This is designed to work with the groove or hole at the tip of a hitch pin, where this pin will lock larger pins in place. This part is an identical replacement for an original carrier bracket that is damaged, faulty, or missing. This dependable bracket carrier is made of high quality durable metal.This is an OEM replacement part sourced directly from the manufacturer and is sold individually. For installation information or hardware requirements, please refer to the original product manual. This part is a suitable replacement for a hairpin cotter in products from Husqvarna, Poulan, Weed Eater, Craftsman, Murray, Ariens, Ryobi, and other brands.

This engine zone control cable is a genuine Husqvarna part, sold individually. This engine zone control cable can be used as a replacement part in a lawnmower. The purpose of the engine zone control cable in a lawnmower is to allow the operator of the appliance to engage and disengage the component with the purpose of speeding up and slowing down the appliance as it is propelled across a variety of surfaces while in use.The engine zone control cable in a lawnmower is a necessary and vital component of the appliance that must be completely replaced if it suffers any form of damage that precludes its basic function. If the engine zone control cable is frayed, worn out, torn, ripped, dented, punctured, warped, or eroded to the point of reduced or no functionality, the engine zone control cable should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This engine zone control cable is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This hex screw is a genuine Husqvarna part, sold individually. A hex screw can be used as a replacement part in a lawn mower or a string trimmer. This screw is a small fastener.The hex screw in a lawn mower or a string trimmermight be lost or damaged. If this occurs, the hex screw should be replaced by this genuine OEM replacement part in order to guarantee the safe continued use of the appliance by its operator. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This hex screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This part is a replacement mulching plug. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a defective or broken mulching plug in various lawnmowers. The mulching plug is installed in the lawnmowers discharge chute and allows the user to switch the mower into mulching mode. In mulching mode, grass clippings will be turned into mulch and expelled, which can provide the lawn with extra nutrients. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this mulching plug, the appropriate owner's manual and equipment diagrams should be referred to. This mulching plug is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with lawnmowers that have been manufactured by Husqvarna and Poulan.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.

This is a blade for a walk-behind lawnmower. A new walk-behind lawnmower blade may be needed if the original is cracked, broken, or damaged in any way. The lawnmower blade can become damaged if it hits a rock, a curb, a landscape block, or other hard objects. It is essential to use extreme care and caution while performing care and maintenance or replacing the lawnmower blade as it can cause serious injury. Wear gloves to protect hands during the replacement process.This lawnmower blade is a genuine OEM Husqvarna part. It is sold individually. This specific lawnmower blade is compatible with walk-behind lawnmowers that are manufactured by the Husqvarna brand and the Jonsered brand.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This part is a replacement mulching plug. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a defective or broken mulching plug in various lawnmowers. The mulching plug is installed in the lawnmowers discharge chute and allows the user to switch the mower into mulching mode. In mulching mode, grass clippings will be turned into mulch and expelled, which can provide the lawn with extra nutrients. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this mulching plug, the appropriate owner's manual and equipment diagrams should be referred to. This mulching plug is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with lawnmowers that have been manufactured by Husqvarna and Poulan.

This replacement part is a discharge chute. This is a genuine replacement part made by Husqvarna. Discharge chutes are typically found in riding lawnmowers and help the grass clippings and debris get deposited in the correct area.A new discharge chute might be needed if the user notices the current chute is not working properly. If grass clippings, mulch, and other debris are being expelled out the wrong area, it might be due to a faulty discharge chute. Be sure to refer to the appropriate user manual before attempting to replace this part. Be sure the engine is completely shut down as there might still be debris logged in the previous chute. This discharge chute is sold individually and is sourced directly from the manufacturer. It is a genuine OEM replacement part which ensures a proper fit.