Parts for Poulan PR55Y21CHC: Engine / Housing / Handle Parts

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

This T-handle bolt is a genuine MTD part, sold individually. This T-handle bolt can be used as a replacement part in the engine of a lawn mower or an edger. The purpose of the T-handle bolt is to work in conjunction with band clamps or straps with the intention of maintaining the placement of fuel tanks and other components.The T-handle bolt might have to be replaced at some point within the standard lifespan of the appliance in the event that it cannot perform its function as usual. This could occur as a result of general wear and tear from long-term usage or from a direct impact collision with a hard object such as a rock or a curb. If this occurs and the T-handle bolt is stripped beyond functionality or otherwise punctured or eroded, the component should be removed and replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This T-handle bolt is compatible with the following outdoor appliance brands: MTD and Craftsman.

This genuine Husqvarna part is a hairpin cotter intended for use with Poulan, Husqvarna and Weed Eater brand walk-behind lawn mowers. This hairpin cotter, also known as a clip or hinchpin, is used to secure a component on a shaft in the lawn mower . This part is shaped like a bobby pin with a single piece of metal formed into a large ring at the top end, and a "W" shape at the other. This is designed to work with the groove or hole at the tip of a hitch pin, where this pin will lock larger pins in place. This part is an identical replacement for an original carrier bracket that is damaged, faulty, or missing. This dependable bracket carrier is made of high quality durable metal.This is an OEM replacement part sourced directly from the manufacturer and is sold individually. For installation information or hardware requirements, please refer to the original product manual. This part is a suitable replacement for a hairpin cotter in products from Husqvarna, Poulan, Weed Eater, Craftsman, Murray, Ariens, Ryobi, and other brands.

The rear door kit serves as a replacement for the rear door on select mowers. Another term for this part is the chute door. It can be used with a clipping bag to allow the grass to shoot directly into the bag rather than leaving it on the ground to be raked later. The rear door on the mower could be damaged by simple wear and tear, or it could be due to an accident. If it is not working properly or is broken, you may not be able to add the clipping bag to the mower. Before replacing the rear door on the mower, be sure that the mower has been turned off and that the engine is cool. This door kit is easy to install. Eemove the wire and boot from the spark plug to ensure the engine doesn't accidentally start. Remove the grass bag and use pliers to remove the rear door.This rear door kit will be compatible with specific models of mowers from Craftsman, Husqvarna, and Poulan. The kit is sold individually and is a genuine OEM replacement part.

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This is a blade for a walk-behind lawnmower. A new walk-behind lawnmower blade may be needed if the original is cracked, broken, or damaged in any way. The lawnmower blade can become damaged if it hits a rock, a curb, a landscape block, or other hard objects. It is essential to use extreme care and caution while performing care and maintenance or replacing the lawnmower blade as it can cause serious injury. Wear gloves to protect hands during the replacement process.This lawnmower blade is a genuine OEM Husqvarna part. It is sold individually. This specific lawnmower blade is compatible with walk-behind lawnmowers that are manufactured by the Husqvarna brand and the Jonsered brand.

This hinge rod is a genuine Husqvarna part, sold individually. This hinge rod can be used as a replacement part in a lawnmower. The purpose of a hinge rod in a lawnmower is to affix to the discharge chute so that the chute has a range of motion while remaining attached to the appliance to fulfill its function.The hinge rod in a lawnmower might have to be replaced if it is damaged. The hinge rod could be punctured, scraped, dented, cracked, or eroded to the point that the hinge rod can no longer affix to the discharge chute or that the component is loosened to the point that a repair cannot fix it. If this occurs, the hinge rod should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This hinge rod is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Ariens, Murray, and Poulan.

This part is a replacement discharge chute deflector. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a broken, detached, or defective discharge chute deflector in lawnmowers.The discharge chute deflector is critical for user safety, as it deflects the debris expelled from the mower away from the user to help prevent injury. The lawn mower should not be used without a working discharge chute deflector in place. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this discharge chute deflector, the appropriate owner's manual and equipment diagrams should be referred to. This discharge chute deflector is a genuine OEM part made of durable plastic and is sold individually. It is suitable for use with lawnmower models that have been manufactured by Husqvarna, Poulan, and other brands.