Parts for Poulan LO45N21CA: Engine / Housing / Wheels / Tires / Handle Parts

Replacement control bar for walk behind lawn mowers. Installs on the handle to control power and speed. Replace if cracked, bent, or broken.

Upper handle for walk behind lawn mowers. Replace this structural component if your current handle is cracked, broken, bent, or missing. Black finish.

Lower handle for 21-inch walk behind mowers. Replaces cracked, bent, or broken lower handle sections. Black finish. Restores comfortable control.

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

Replacement handle bolt for lawn mowers and outdoor power equipment. Secures upper and lower handles together. Replace if damaged, stripped, or missing.

Replacement hex bolt for outdoor power equipment. Secures components like fuel tanks and body panels. Needed when original is stripped, rusted, or lost.

Replacement mulch door for walk-behind lawn mowers. Closes the discharge chute to enable mulching. Replace if cracked, bent, damaged, or won't stay in place.

This is an engine zone control cable, also known as a control cable, manufactured by Husqvarna. This component stops the blade when a lawn mower handle is released. When this part goes bad, it can cause the brake not to release even when the handle is pressed down. Engine zone control cables are known for experiencing wear and tear with regular use. If the cable has any signs of damage, cracking, wear, or stretching, it will need to be replaced. First, disconnect the spark plug wire before releasing the cables from the handle. Next, remove the drive cover before removing the engine zone control cable. The replacement engine zone cable can be connected to the transmission and the drive cover can be replaced. Install the control cable back onto the mower handle, reconnect the spark plug wire, and the lawn mower will be usable again. This is a genuine OEM replacement part that comes directly from the manufacturer. It can be used for mowers from Husqvarna, Weed Eater, AYP, Craftsman, RedMax, Poulan, Poulan Pro, Jonsered, and McCulloch. It is sold individually, and the replacement is considered easy. A screwdriver and pliers are the only tools that will be needed.

Handle knob for lawn mowers, snowblowers, and trimmers. Attaches to upper or lower handle adjustment levers. Replace when cracked, broken, or missing.

Hairpin cotter pin clip secures components on shafts in walk-behind lawn mowers. Replace if bent, broken, or missing to properly retain parts.

This hinge rod is a genuine Husqvarna part, sold individually. This hinge rod can be used as a replacement part in a lawnmower. The purpose of the hinge rod in a lawnmower is to affix the discharge guard to the mulching plate so that the two components are stably mounted to the appliance while in use.The hinge rod in a lawnmower is a small component that can be easily lost or misplaced; additionally, the hinge rod can suffer damage from general wear and tear with long-term use or as a result of collision with a hard object. If any of these things occur to the hinge rod, the hinge rod should be replaced by this genuine OEM replacement part in accordance with the proper instructions sourced from a relevant appliance manual. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hinge rod is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Ariens.

Mower handle won't stay up or feels loose? This torsion spring restores proper handle tension and control. Common fix for walk-behind mowers.

Height adjustment bracket for walk-behind mowers. Mounts to deck to enable cutting height changes. Replace if bracket is bent, cracked, or broken.

Discharge guard mounts to the right side of the mower deck to guide grass clippings out. Replace if cracked, broken, or missing from impact damage.

Attaches to the height adjuster lever to set your mower deck cutting height. Replace if cracked, broken, or missing for proper deck adjustment control.

Rear left axle arm assembly for walk behind lawn mowers. Replaces broken, bent, or worn axle arms. Mounts to mower deck to support rear wheel axle.

Flanged hex nut for lawn tractors and outdoor power equipment. Replace if threads are stripped, nut is missing, or hardware has corroded or loosened.

Black plastic hubcap for walk behind lawn mower wheels. Replaces cracked, broken, or missing hubcaps to protect wheel bearings and maintain appearance.

Secures hinged components on your walk-behind lawn mower. Replace if screw is stripped, missing, or damaged. Essential hardware for proper assembly.

Left-hand spring for walk behind lawn mowers. Replace if your original spring is stretched, broken, missing, or no longer provides proper tension.

Replacement wheel for walk behind lawn mowers. Installs on axle to enable smooth rolling and steering. Replace if cracked, worn, or damaged from use.

A lock nut secures bolted joints with the creation of friction on the thread of the bolt. It prevents loosening of parts, which is a common occurence on lawn machines due to the tremendous amounts of vibration and wear, which can loosen connections between crucial components. This lock nut will prevent such issues. It will be necessary to have wrenches and other tools to make the repair or replacement. This OEM lock nut for Husqvarna and Craftsman fits garden machines that include tillers, lawnmowers, tractors, and other equipment. This durable part ships individually.

Uneven lawn cuts or poor mulching? This walk-behind mower blade restores clean cutting performance. Simple DIY replacement in under 30 minutes.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.

Rear grass catcher frame mounts on the back of your walk behind lawn mower to support the grass bag. Replace if cracked, bent, damaged, or missing.