Parts for Poulan PR55N21CHE: Engine / Housing / Wheels / Handle Parts

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

This replacement part is a mulch door intended for use in lawn mowers. It closes the discharge chute so that grass cuttings can be recut and turned into mulch.The mulch door can become damaged from impact. If bent or worn out, it may become stuck or fall out of place, necessitating replacement.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This T-handle bolt is a genuine MTD part, sold individually. This T-handle bolt can be used as a replacement part in the engine of a lawn mower or an edger. The purpose of the T-handle bolt is to work in conjunction with band clamps or straps with the intention of maintaining the placement of fuel tanks and other components.The T-handle bolt might have to be replaced at some point within the standard lifespan of the appliance in the event that it cannot perform its function as usual. This could occur as a result of general wear and tear from long-term usage or from a direct impact collision with a hard object such as a rock or a curb. If this occurs and the T-handle bolt is stripped beyond functionality or otherwise punctured or eroded, the component should be removed and replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This T-handle bolt is compatible with the following outdoor appliance brands: MTD and Craftsman.

This genuine Husqvarna part is a hairpin cotter intended for use with Poulan, Husqvarna and Weed Eater brand walk-behind lawn mowers. This hairpin cotter, also known as a clip or hinchpin, is used to secure a component on a shaft in the lawn mower . This part is shaped like a bobby pin with a single piece of metal formed into a large ring at the top end, and a "W" shape at the other. This is designed to work with the groove or hole at the tip of a hitch pin, where this pin will lock larger pins in place. This part is an identical replacement for an original carrier bracket that is damaged, faulty, or missing. This dependable bracket carrier is made of high quality durable metal.This is an OEM replacement part sourced directly from the manufacturer and is sold individually. For installation information or hardware requirements, please refer to the original product manual. This part is a suitable replacement for a hairpin cotter in products from Husqvarna, Poulan, Weed Eater, Craftsman, Murray, Ariens, Ryobi, and other brands.

This hinge rod is a genuine Husqvarna part, sold individually. This hinge rod can be used as a replacement part in a lawnmower. The purpose of the hinge rod in a lawnmower is to affix the discharge guard to the mulching plate so that the two components are stably mounted to the appliance while in use.The hinge rod in a lawnmower is a small component that can be easily lost or misplaced; additionally, the hinge rod can suffer damage from general wear and tear with long-term use or as a result of collision with a hard object. If any of these things occur to the hinge rod, the hinge rod should be replaced by this genuine OEM replacement part in accordance with the proper instructions sourced from a relevant appliance manual. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hinge rod is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Ariens.

This hex bolt is a genuine OEM replacement part sourced directly from the manufacturer. It is used in multiple applications in outdoor power equipment to connect components, such as attaching the fuel tank to the body of a lawnmower. The hex bolt has a six-sided head that is removed or installed using a hex wrench. Hex bolts can become loosened due to vibration during use and will need to be tightened during regular maintenance. If the bolts are rusted or have fallen out and are lost, replacements can be installed. Always wear gloves when working with equipment. Make sure the equipment has had time to cool down to prevent burns. Locate the part that has a missing or damaged hex bolt. If necessary, remove components that are in the way. Use a hex wrench or box wrench to loosen the bolt that needs to be replaced. Once loosened, the bolt can be manually removed by hand; gripping the sides of the head and turning will unscrew the bolt. Pull the bolt out and insert the one. Screw as far down as possible by hand. Finish tightening using a hex wrench. Do not overtighten.This hex bolt is made of heavy-duty metal and is sold as an individual unit. It is compatible with lawnmowers, lawn tractors, and other machinery manufactured by Husqvarna, Bluebird, Poulan, and Craftsman.

This part is a discharge guard designed to fit on lawn mowers built by Craftsman. The discharge guard fits on the right side of the cutting deck and guides the ejected grass clippings out the right side of the mower. Because they protrude several inches away from the mower, it is common for discharge guards such as these to be banged against fences, trees, curbs, and other fixed objects. While the guard is constructed of resilient plastic, it can be cut or the slots used to fix it to the mower may be torn, causing the grass to be incorrectly discharged. Replacement of the discharge guard is a simple matter since no hardware is involved. Simply lift off the old guard, removing it from the slots in the attachment housing. The new guard should settle onto the slots and provide an immediate perfect seal. Should replacing the side discharge guard become necessary, it is essential to use an OEM certified replacement that is, like this one, identical to the manufacturer's original part. This discharge guard is compatible with mowers offered by Weed Eater, Ariens, Craftsman, Poulan, and Husqvarna.

This height adjuster knob is for lawn mowers. It attaches to the mower's height adjuster lever to adjust the lawn mower deck to the desired cutting height. Adjusting the lawn mower height ensures that the lawn is cut to the proper mowing height. The correct mowing height for a lawn depends on multiple factors, such as the type of grass species and the time of year. Height adjuster levers are typically made of metal, so the slightly rubberized height adjuster knob protects the operator during the adjustment process. The height adjuster knob's flat surface also prevents slippage during the adjustment process. The knob slides onto the lever and attaches without any clips, retainers, or screws. To remove the knob, pull it off. It might be challenging to remove. Due to the location of the height adjuster knob, wearing gloves is recommended when replacing the knob. This knob is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with lawn mowers made by Craftsman, Husqvarna, Weed Eater, Poulan, and Murray.

A lock nut secures bolted joints with the creation of friction on the thread of the bolt. It prevents loosening of parts, which is a common occurence on lawn machines due to the tremendous amounts of vibration and wear, which can loosen connections between crucial components. This lock nut will prevent such issues. It will be necessary to have wrenches and other tools to make the repair or replacement. This OEM lock nut for Husqvarna and Craftsman fits garden machines that include tillers, lawnmowers, tractors, and other equipment. This durable part ships individually.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This is a blade for a walk-behind lawnmower. A new walk-behind lawnmower blade may be needed if the original is cracked, broken, or damaged in any way. The lawnmower blade can become damaged if it hits a rock, a curb, a landscape block, or other hard objects. It is essential to use extreme care and caution while performing care and maintenance or replacing the lawnmower blade as it can cause serious injury. Wear gloves to protect hands during the replacement process.This lawnmower blade is a genuine OEM Husqvarna part. It is sold individually. This specific lawnmower blade is compatible with walk-behind lawnmowers that are manufactured by the Husqvarna brand and the Jonsered brand.

This is a rear grass catcher frame that is used on a variety of lawnmowers. The grass catcher frame goes on the back of the lawnmower and is designed to offer support for the grass bag where the lawn clippings are held. Damage is the most common reason to replace the rear grass catcher frame. This can be caused by impact or wear and tear through regular use. If the frame becomes damaged, it will need to be replaced.When replacing the rear grass catcher frame, no tools are needed but work gloves may be useful. Take the lawnmower and put it on a level surface. It should be turned off with the spark plug wire disconnected. Take the grass bag off of the damaged frame before removing the original component. Place the grass bag on the new frame and install it onto the lawnmower.The rear grass catcher frame is designed to be compatible with lawnmowers made by Weed Eater, Poulan, Craftsman, and Husqvarna. It is sold as an individual component. This is an authentic OEM replacement part that is sourced directly from the manufacturer.