Parts for Ariens 936060: Engine Parts

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This genuine Husqvarna fuel cap provides cover and protection to the hole into which engine oil is dispensed on certain lawn mowers, lawn tractors, and snowblowers. This fuel cap should remain closed when the appliance at hand is not in use in order to prevent leakage.If the engine of a small engine appliance is suffering from frequent leakages, there could be damage in the fuel cap that is causing the leaks. A fuel cap could also become misplaced. If the cap is broken or lost, it must be replaced immediately before using the small engine appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel cap is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman. This part is sold individually.

This screw is a common piece of hardware and serves as a replacement for those that are lost, damaged, or missing. It can be used for a range of machines, but it is typically used with lawnmowers and tractors as a means to fasten elements together and to reduce vibration.Although screws are meant to last, they can wear down and break over time. They may also become corroded from the elements. When repairing the machine, there is also the risk that the screws may be lost. Regardless of the problem with the screw, it will need to be replaced before the machine can be operated. The process is usually straightforward, but this can vary based on the location of the screw.The screws can be used with many models of lawn mowers and tractors from Husqvarna, Poulan, Ryobi, Weed Eater, and Jonsered. This is a genuine OEM replacement part sourced from the manufacturer. The screw is sold individually.

This OEM replacement part is a socket screw for lawnmowers. The socket screw attaches the exhaust to a lawnmower. If the socket screw is no longer securing the exhaust of the lawnmower, it will need to be replaced. Luckily replacing this screw is a very simple process.Before beginning, make sure the exhaust pipe has cooled. After that, locate the old socket screw that attaches the exhaust. Once located, unfasten the old screw. After removal, replace it with the new socket screw by tightening it with a screwdriver. Make sure it is fastened all the way so that the exhaust is secure. This genuine replacement part is sold individually and is compatible with Husqvarna, Poulan, and Craftsman brand lawnmowers.