Parts for Poulan PB185A42-96042016600: Engine Parts

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This riding lawn mower muffler is a replacement part for mowers that have a bad or damaged muffler. The muffler reduces the amount of exhaust noise that comes from the mower. It is also needed to prevent exhaust sparks from igniting dry leaves, grass, or other debris on the ground. Without a muffler, it could also allow cool air to get into the exhaust valve, which could cause the engine to lose compression. This could mean needing a valve replacement. The muffler on a riding mower can become damaged and have other issues after a couple of seasons. A buildup of soot in the muffler can cause it to be less effective. Additionally, the muffler could develop small holes or cracks that will reduce or eliminate its effectiveness entirely. When the muffler is no longer working properly, or if it has been several seasons, it is a good idea for owners to replace the muffler. This is a genuine OEM part sourced from the manufacturer. It can be used with riding mowers from a range of manufacturers including Ryobi, Husqvarna, Poulan, Craftsman, Jonsered, and Ariens.

This engine pulley is a genuine MTD part, sold individually. This engine pulley can be used as a replacement part in a lawnmower. The purpose of the engine pulley in a lawnmower is to guide the rotational motion of the drive belt within the internal mechanisms of the lawnmower such that the belt can facilitate the rotation of the wheels and the propulsion of the appliance across a variety of surfaces when in use.If the engine pulley has been cracked, scraped, punctured, dented, warped, or eroded to the point that it can no longer serve its function, the engine pulley should be removed and replaced by this genuine OEM replacement part as soon as possible.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This engine pulley is compatible with the following outdoor appliance brands: MTD and Craftsman.

This OEM replacement part is a socket screw for lawnmowers. The socket screw attaches the exhaust to a lawnmower. If the socket screw is no longer securing the exhaust of the lawnmower, it will need to be replaced. Luckily replacing this screw is a very simple process.Before beginning, make sure the exhaust pipe has cooled. After that, locate the old socket screw that attaches the exhaust. Once located, unfasten the old screw. After removal, replace it with the new socket screw by tightening it with a screwdriver. Make sure it is fastened all the way so that the exhaust is secure. This genuine replacement part is sold individually and is compatible with Husqvarna, Poulan, and Craftsman brand lawnmowers.

This is a genuine replacement for the oil drain valve on select Husqvarna engines. The oil drain valve is connected to the oil pan and the drain, assisting with draining oil from the engine. As the oil passes through the drain valve, it can cause residue to build up over time. This is a metal part, but it can become damaged in many ways. The valve seals could become worn or faulty, creating leaks. In the event that it is no longer functioning, a replacement valve may be required. This OEM part will provide an exact fit for compatible engines. This genuine oil drain valve is manufactured by Husqvarna to exact standards and is compatible with many engines made by the brand. These engines are found in lawn tractors from brands like RYOBI, Weed Eater, Poulan, and Jonsered, as well. Allow the engine to cool completely and disable the spark plug(s) before beginning any engine repairs. This durable metal replacement part is sold as an individual unit and additional hardware and accessories are not included.