Parts for Tecumseh LV195EA362004D: Engine Parts

This breather tube is a genuine OEM replacement part sourced directly from the manufacturer. It is used on various lawn mowers and small engines to provide ventilation to the engine crankcase and prevent pressure buildup. It attaches to the cylinder assembly so that air can flow in and out and prevent damage to the engine. The breather tube on lawnmowers also has a reed that lubricates the pistons by collecting oil and sending it back to the crankcase. Over time, the breather tube may become dry and brittle, resulting in cracks. A damaged breather tube can lead to blown seals and gaskets, oil leaks, and reduced engine performance. Oil leaks are identified by bluish smoke coming from the exhaust, engine backfiring, or a decrease in overall performance. If this occurs, check the breather tube for clogs or damage. Replacing the breather tube requires a cooled-down muffler and screwdriver. Remove the muffler to reach the tube. Remove the screws holding the tube in place. Remove the tube and check for damage and clogs. Replace with a new tube if it is damaged. Reinstall the tube and screws. Reinstall the muffler. This breather tube is made of durable rubber and is sold as an individual part. The tube does not come with retaining screws. It is compatible with lawn mowers and small engines manufactured by Tecumseh, Toro, and Cub Cadet.

The oil seal is designed to stop fluid from leaking out, as well as to ensure that dirt and other debris do not make their way into the oil. When applied properly, it should create an impermeable seal. It also provides spacing between the crankcase and the crankshaft. If the oil seal has been damaged or has degraded because of wear and tear, it will need to be replaced. Some of the signs that the oil seal might be bad include leaks or an engine that is not performing properly. Users might also notice that the machine is going through oil quickly. This is an authentic OEM product that is sold individually. The oil seal can be used with many types of lawn and garden equipment including lawn mowers, snowblowers, tillers, pressure washers, wood chippers, generators, and other small engines. Compatible brands including Briggs & Stratton, Simplicity, Snapper, MTD, Lawn-Boy, Tecumseh, Cub Cadet, Toro, and Craftsman.

This is a replacement crankcase gasket that can be used for a range of outdoor power equipment and small engines including lawn mowers. The crankcase gasket helps to provide a seal between the crankcase and the crankcase cover. It will help to ensure that there are no oil leaks, which could cause performance problems with the engine. The crankcase gasket should be checked on when owners do regular maintenance to their machines. The gaskets can start to have problems the longer they are used. They can start to dry out and crack, and they may even break. These kinds of issues could then cause an oil leak. This not only causes a mess, but it will waste oil. The replacement is relatively easy to perform. The crankcase gasket is made from durable material, and it is a genuine OEM part right from the manufacturer. It can be used with many types of small engines including those found on pressure washers and lawn mowers. Brands with compatible models include Tecumseh, Lawn-Boy, Toro, and Briggs & Stratton.

Here is a genuine replacement governor shaft that can be used with many types of small engines. The metal governor shaft is used in the cylinder cover to help hold the governor spool and the gear. Without a properly functioning governor shaft, it will cause performance issues with the machine. The shaft is made from metal, and it is durable. However, there may still be a need to replace it at some point. It could have become corroded or damaged, or it could have become lost during another repair. Regardless of the reason, owners will want to replace it sooner rather than later. A wrench and pliers will be needed to make the replacement. This is an authentic OEM part that is the same as the original on the machine. It is sold individually. The part can work with many makes and models of lawnmower, snowblower, log splitter, generator, wood chipper, pressure washer, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.

This is a genuine replacement flywheel nut that comes from the manufacturer Tecumseh. Nuts are used in various applications in a range of different types of machines. This flywheel nut is made from metal and is used to fasten the engine's flywheel to the crankshaft assembly. It helps to ensure that the connection is tight and that it does not start to come loose during operation. Nuts are a commonly lost part when making repairs on a machine or even during routine maintenance. The flywheel nut could also become corroded or otherwise damaged over years of use. If this happens, owners will want to be sure to replace the nut as soon as possible. Replacement for the flywheel nut tends to be fast and simple. This is an authentic OEM flywheel nut that is sold individually. The nut is a common part and can be used on many different machines. These include lawn mowers, snowblowers, generators, log splitter, wood chippers, pressure washers, generators, tillers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.

Spark plug covers can help to ensure added protection for the sparkplugs and can make sure that there is no debris getting on them. While the spark plug covers are long-lasting, they will eventually need to be replaced. Over time, they will start to dry, crack, and come apart. When this happens, replace the covers right away. Also replace the spark plugs at the same time. The OEM spark plug cover is sold individually, be sure to get enough to cover all the plugs. The cover can work with many different brands, including Craftsman, Briggs & Stratton, Toro, Cub Cadet, Troy-Bilt, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity. The covers can work for many types of machines, including lawnmowers, generators, chippers, log splitters, edgers, pressure washers, tillers, and other small engines.

This replacement cylinder head gasket is a genuine part manufactured by Tecumseh for use in select lawn and garden engines. The cylinder head gasket is designed to fit between the cylinder head and the crankcase, sealing the flow of air and fuel through the engine and preventing oil from getting into the fuel. The gasket is exposed to high heat and constant pressure and will become brittle and worn over time. This could affect the seal and lead to bigger problems, so an immediate replacement is necessary. This OEM cylinder head gasket is manufactured to exact standards by Tecumseh and can be used in select models from the brand, as well as those from Toro and Lawn-Boy. The gasket fits certain models of pressure washers, lawnmowers, and chippers. It is sold as an individual unit and doesn't include any hardware or accessories. Replacing the cylinder head gasket should only be done when the engine is cool. Wear gloves and work in a well-ventilated space when doing this kind of work for safety. When replacing gaskets, always use care with the new part so that it doesn't get broken or damaged during installation.

This is a genuine cylinder head bolt replacement designed for use on select small engines found in outdoor power equipment. The cylinder head bolt is responsible for securing the cylinder head in the engine. It is exposed to constant vibrations and high pressure, which can lead to eventual wear and damage. These bolts will need to be replaced immediately if they become damaged or broken. If the bolts are not replaced, the cylinder head will not be secure and that could cause further engine damage or total failure. This genuine OEM replacement bolt is manufactured by Tecumseh and designed for use in engines in a number of its small outdoor power machines. This part is compatible with dozens of engines and the exact number of bolts and placement may vary based on the model. The parts diagram should provide information on the application and location of this part. This bolt is sold as an individual unit, and those who need more than one will have to order multiple quantities. Always wear gloves for hand protection and allow the engine to cool before performing any engine repairs. This replacement bolt requires a hex socket or screwdriver.

This on-off switch terminal is composed of electrical contact areas that connect to a charge or load on a battery. One is marked for positive current while the other is where the current returns to. These terminals can sometimes stop working or suffer corrosion which makes them dangerous to use. Brushing and cleaning a terminal can help remove dirt and debris, but a malfunctioning terminal requires a replacement. This is the case if the corrosion is severe enough to eat away at the metal or the terminal doesn’t clamp on the way that it should. The battery terminals can be removed and replaced using tools like pliers, a socket set, a wrench set, and a hacksaw. This terminal is a genuine OEM component directly from the manufacturer. It’s designed to be used on engines of snowblowers, lawnmowers, chipper shredders, and tillers. It is compatible with Tecumseh, Husqvarna, Toro, Troy-Bilt, Craftsman, Simplicity, Cub Cadet, Briggs & Stratton, and MTD equipment. Some items that can help with installation include anti-corrosion spray, felt pads, and heat-shrink tubing.

This is a genuine replacement hex screw that is used in select outdoor power equipment engines. The hex screw is a generic, general use part that has several applications depending on the unit. It is small, so it may be lost or misplaced over time or during repairs. These durable metal screws are also known to wear due to the constant exposure to high heat and vibrations. If screws are damaged or go missing, they will need to be replaced in order to ensure the machine is safe to operate.Whenever replacing small parts, it is a good idea to wear gloves and keep a magnetic tool around in case screws fall into the engine. Always allow the engine to cool completely before working on power equipment. A Torx screwdriver or socket wrench will be required to replace this part. This hex screw is a genuine OEM part manufactured to exact standards by Tecumseh and designed for use in machines and engines from the brand along with those from Husqvarna, Toro, and Lawn Boy. Typically, these screws are found in lawnmowers, but they can be used in other equipment as well.

This is a genuine OEM screw replacement sourced directly from the manufacturer. It is a muffler stud screw used on lawn mowers, snowblowers, and other outdoor lawn and garden engines. This muffler screw attaches the muffler to the engine. These screws go directly through the muffler case and into the engine housing. There is no need for a nut or other fastener. Over time, vibration from the engine may cause them to loosen and possibly fall out. If this happens, the muffler can fall off. Periodic inspection and tightening will prevent this from occurring. A visual inspection as well as checking the tightness by hand will reveal any issues.If the screws are missing or rusted and need to be replaced, make sure the muffler has cooled before attempting to remove the screws. Use a wrench to remove the screws from the muffler. Insert the new screws and hand tighten. Use the wrench to tighten slightly more. Be careful not to overtighten and strip the screws. These screws are 1/4-20 x 2-9/32, gold in color, and sold individually. These muffler shoulder screws are compatible with lawnmowers, snow blowers, chippers, edgers, pressure washers, and other engines manufactured by MTD, Craftsman, Tecumseh, Toro, and Cub Cadet.

This is a genuine engine recoil starter cup that is designed for use in several different styles of outdoor lawn and garden equipment engines. This engine recoil starter cup is part of the starter recoil assembly and is used to attach various parts to the engine. The starter cup's primary role is to engage the flywheel when the starter rope is pulled. Although it is made of durable metal, this part can become warped or otherwise damaged over time and with constant exposure to high temperatures. If the part fails to work, the engine may not be able to engage until it is replaced. This engine recoil starter cup is manufactured by Tecumseh and is an OEM replacement part. It works with several models of outdoor power equipment engines, including those in machines from Craftsman, Sears, Lawn Boy, MTD, Troy-Bilt, and Tecumseh. The part is sold individually and does not include hardware. Allow the engine to cool completely and wear gloves for hand protection whenever performing engine repairs. If additional parts of the starter recoil assembly need to be replaced, those will require an additional purchase.

This screw is a versatile and genuine OEM part that can be used in various products. Screws are threaded fasteners that hold objects together. This generic product makes use of an external thread, or helical ridge, to fasten materials by engagement of a screw thread with an internal thread in the complementary part. The screw is sourced directly from the manufacturer. The part can become lost due to a variety of factors relating to general use. If the part is lost through general use, it can be replaced simply. Each screw is sold individually from the manufacturer. The part can be installed with a screwdriver and should only take a few minutes to replace. Make sure to inspect screws frequently in case a replacement screw is required. This generic screw part can be used with engines, snowblowers, and lawnmowers. Specifically, the product can be used with the Husqvarna Tec (1997-04) Engine as well as a variety of Toro snowblowers and lawnmowers. Users should check their manuals to ensure part compatibility before purchase as there are more than 150 compatible models.

This filler tube is designed for use on lawnmowers as a part of the oil system. The tube sits inside of the crankcase and has a rubber seal to prevent any leaking between the two components. It allows people to test the oil level using a dipstick. It is made of durable plastic but may experience damage or breakage over time. If the filler tube for a lawnmower is broken or cracked, leaking can occur. Taking a look at the tube will give an indication of whether the part is in good shape. If there is any issue with the tube, it needs to be replaced. The filler tube attaches to the lawnmower using a screw so a screwdriver is needed for the repair. Simply unscrew the old filler tube and place the replacement component in its place. Put the screw back in and tighten it before using the lawnmower. This filler tube is a genuine OEM replacement part sourced directly from the manufacturer. It comes as an individual part. The tube is compatible with lawnmowers from Craftsman, Lawn-Boy, Toro, and Tecumseh. It comes with gaskets to fit several different types of lawnmowers.

A dipstick is a part that is used to measure the amount of oil in various yard and garden equipment. It allows a person to reach an otherwise inaccessible space by inserting and then removing the dipstick. At that point, checking how much of the dipstick is covered in oil will let a person know whether it needs to be topped off. Over time, these tools can rust, break, or crack and will need to be replaced.Take a look at the dipstick for any damage before making a replacement of the part. If it needs to be replaced, it should be done while the lawnmower or other tool is cooled down. Unscrew the broken or damaged dipstick and take it out of the oil tank. Simply insert the new dipstick and screw it on before checking the oil level and using the machine again.This dipstick is a replacement part for Tecumseh, Cub Cadet, Toro, Briggs & Stratton, Troy-Bilt, Lawn-Boy, and Craftsman lawnmowers, wood chippers, and pressure washers. It comes as an individual component. It is a genuine OEM product that is sourced directly from the manufacturer.

This is a genuine replacement screw designed for Tecumseh engines installed on Toro lawn mowers. While screws are used for many purposes on the engine and mower body, this screw is usually found holding the starter grille in place over the rewind starter. The grille serves a number of important purposes, including allowing airflow, preventing large debris from binding up the starter, and more. In most cases, screws do not suffer from wear and tear. However, there are many ways they might be damaged. Removing the screw with the wrong tool might round the head, for instance. The screw may also be rusted in place if the mower is left unprotected in the elements. Replacing the grille screen screws is a simple process and requires little more than a wrench or the appropriate socket and ratchet. Simply unscrew it, dispose of it, and install the new screw. This screw is made from metal for better durability and is a genuine OEM replacement part. It is sold individually and works with Toro mowers with Tecumseh engines. It is also compatible with Craftsman, Lawn-Boy, and Cub Cadet mowers.

This control display board is the appliance's user-interface module that operates the front control panel and display, giving visible status and responding to user input. Replacing it fixes display and control issues safely and simply. What it does:

• Provides the visible display and interprets button/touch inputs so the appliance responds to selections.
• Can produce unresponsive or intermittent buttons/touch controls and erratic indicator lights.
• May trigger control errors or prevent cycle selection if damaged.

• Disconnect all power before starting — turn off breaker or unplug the appliance.
• Handle the board carefully and avoid static discharge; use a grounding strap if available.
• Remove and reattach wire connectors and mounting hardware gently; note connector orientation.
• Reconnect power and verify functions before reassembling trim or covers.

The recoil starter assembly is a replacement for the starter on lawn equipment. It has been sourced from the original equipment manufacturer to ensure a proper fit. The assembly allows users to start up their equipment by pulling on the starter rope. This causes the cogs to engage with the drive cup on the flywheel, so the engine can start. Over time, this assembly can start to have some wear and tear issues and might need replacement. It might have cracks or pieces broken off, including on the interior of the assembly. This could make it more difficult, or even impossible, to get the engine to start. Replacing the entire assembly could be the needed fix. The genuine OEM part is a complete assembly that includes the plastic shroud, the recoil spring, starter pulley, pull rope, and handgrip. The part can be used with lawn mowers, pressure washers, wood chippers, and other small engines. It is compatible with Tecumseh, Toro, Lawn-Boy, Cub Cadet, Craftsman, and Briggs & Stratton.