Parts for Echo PB-265L: Engine, Short Block - Sb1092 Parts

This intake manifold gasket is a replacement part that will work with a range of types of lawn and garden equipment to prevent leaks and to stop debris from getting into the engine. Gaskets can start to wear down over time. They may become brittle or start to break apart. If the intake manifold gasket has failed, it can cause a range of problems for the engine. There could be leaks, and the engine may no longer function properly. Owners should check their gaskets if they are having trouble with their engine. If the gaskets are to blame, they need to be replaced. This genuine OEM replacement intake manifold gasket is sold individually. It can work with blowers, hedge trimmers, edgers, grass trimmers, string trimmers, and pole pruners. Compatible brands include Echo and Shindaiwa. Buyers who are looking for intake manifold gaskets need to be sure they are choosing the correct size for their make and model.

This genuine Echo retaining ring can be used as a replacement part for string trimmers, hedge trimmers, chainsaws, leaf blowers, and leaf vacuums. The function of a retaining ring for a small engine appliance is to fasten and limit the motion of a component by attaching it to a shaft or into a bore. A retaining ring can come loose and fall off, becoming lost. A retaining ring can also suffer damage over time in the form of punctures, piercings, or corrosion to the metal material that can preclude it from continuing to fasten components to shafts and bores. If this is the case, the damaged retaining ring should be immediately removed and replaced with this genuine OEM part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This retaining ring is compatible with the following brands: Echo, Little Wonder, and Shindaiwa.

This oil seal is used in a wide selection of lawn and garden equipment. It is used to prevent dust, water, dirt, and other contaminants from reaching important parts. It also helps retain lubrication so the motor can run without any issues. If the oil seals are no longer working correctly, it can allow the oil to leak out of the tool. Topping off the oil is an option, but replacing the seal will take care of the issue for good. If there is oil leaking from a pole saw or hedge trimmer, this is an indication that new oil seals may be needed. Sockets and wrenches will be needed to handle the replacement process. Drain the oil from the engine and remove the motor to get started. Take a look at the oil seals and how they are seated for replacing the seal later. A drill or a screw can be used to remove the old seal before putting the new one in. Designed for use with Echo, Little Wonder, Mantis, and Shindaiwa string trimmers, hedge trimmers, leaf blowers, tillers, edgers, and pole saws, this component is sold individually. It is a genuine OEM part that comes directly from the manufacturer.

This is a ball bearing that is made out of durable metal and used in a variety of lawn and garden equipment types. It fits in between a washer and a spacer in a tool to prevent excessive heat and friction between different components. The ball bearing takes the load and spins to help distribute weight while preventing friction so the tool runs at its best. When the ball or bearing retainer wears out, it can cause issues with the gardening tool. If it is located in a wheel, it can make it hard to turn.Wear is constant on ball bearings whenever a tool is in use, which means they over time they will start to experience issues and can wear out. Pressure, heat, vibration, and friction will take a toll over time. It's important to maintain the ball bearings and replace them whenever needed. This ball bearing is a genuine OEM replacement part that is sourced directly from the manufacturer. It's sold as an individual component. The part is designed for use with string trimmers, hedge trimmers, chainsaws, tillers, and pole pruners made by Echo, Little Wonder, Mantis, and Shindaiwa.

This part is a crankcase gasket. The crankcase is the housing for the crankshaft, which is integrated into the engine block. The crankcase is split into two parts and the crankcase gasket creates a seal between the two halves.A new crankcase gasket may be needed if they are worn out or broken so there isn't a proper seal. It is recommended that the crankcase gaskets are replaced any time that the engine is serviced. This ensures that a proper seal is created when the engine is reassembled.This genuine OEM Echo part is sourced directly from the manufacturer and it is sold individually. This crankcase gasket is used on a variety of outdoor power equipment machines including hedge trimmers, leaf blowers, grass trimmers, edgers, pole saws, and brush cutters. It is compatible with outdoor power equipment that is manufactured by Shindaiwa, Echo, and Little Wonder.

The intake gasket is designed to act as a seal between the cylinder head and the heat dam. It keeps the engine sealed and protected during use. Not only does this reduce the risk of damage to the engine on various lawn equipment units, but it eliminates potential leaks that could reduce engine power or performance and ensures maximum flow to the engine. Gaskets can become worn or damaged over time with regular use or they can break unexpectedly. This Echo gasket is made from compound material that is durable and designed to withstand the high heat inside of an engine. Use it to replace the gasket in compatible lawn equipment. This gasket is an OEM part that is designed to fit many Echo and Little Wonder lawn and garden equipment engines. There are more than 150 compatible models in total, including blowers, pumps, reciprocating saws, cultivators, edgers, and other saws. Check your user manual for compatibility and to see if there are any special replacement instructions to consider.

This is a genuine replacement intake gasket that can be used on select models of outdoor power equipment engines. The intake gasket is responsible for creating a seal on the cylinder where the intake comes into the engine. Over time, this gasket can be cracked or otherwise damaged from high heat and constant pressure of use. The composite gasket can also become warped and create a faulty seal, which would also necessitate replacement.A screwdriver is required to replace this part. Gaskets should always be inspected when other repairs are being performed. They are usually a part of routine maintenance simply because they break down and wear with age. Some people may even want to keep an extra one handy in case of emergency repairs. Always allow the engine to cool and never work on power equipment without gloves.This intake gasket is a genuine OEM part manufactured by and made for use in machines from Echo. It can be found ins elect models of blowers and blower/vacuums from the brand. The gasket is sold as an individual part and it is made from high quality composite materials.