Parts for Echo PB-265L: Fuel System Parts

This part is a crankcase gasket. The crankcase is the housing for the crankshaft, which is integrated into the engine block. The crankcase is split into two parts and the crankcase gasket creates a seal between the two halves.A new crankcase gasket may be needed if they are worn out or broken so there isn't a proper seal. It is recommended that the crankcase gaskets are replaced any time that the engine is serviced. This ensures that a proper seal is created when the engine is reassembled.This genuine OEM Echo part is sourced directly from the manufacturer and it is sold individually. This crankcase gasket is used on a variety of outdoor power equipment machines including hedge trimmers, leaf blowers, grass trimmers, edgers, pole saws, and brush cutters. It is compatible with outdoor power equipment that is manufactured by Shindaiwa, Echo, and Little Wonder.

The intake gasket is designed to act as a seal between the cylinder head and the heat dam. It keeps the engine sealed and protected during use. Not only does this reduce the risk of damage to the engine on various lawn equipment units, but it eliminates potential leaks that could reduce engine power or performance and ensures maximum flow to the engine. Gaskets can become worn or damaged over time with regular use or they can break unexpectedly. This Echo gasket is made from compound material that is durable and designed to withstand the high heat inside of an engine. Use it to replace the gasket in compatible lawn equipment. This gasket is an OEM part that is designed to fit many Echo and Little Wonder lawn and garden equipment engines. There are more than 150 compatible models in total, including blowers, pumps, reciprocating saws, cultivators, edgers, and other saws. Check your user manual for compatibility and to see if there are any special replacement instructions to consider.

This fuel cap assembly is for use with a range of gas-powered lawn and garden machines. The fuel cap covers the fuel tank and is designed to keep fuel in the tank and debris and air from getting inside. This cap includes a retainer that helps to keep the cap from falling and becoming lost when adding fuel to the machine. Fuel caps are a simple but important part of any gas-powered piece of equipment. The cap could suffer from damage caused by natural wear and tear or because of an accident. It may no longer tighten properly. They could also become lost if there is no retainer in place. When there is damage to the cap or it is lost, owners will want to replace it right away. This is an authentic OEM replacement part that is sold individually. The cap can be used on many models of tiller, string trimmer, leaf blower, edger, hedge trimmer, and pole pruner. Compatible brands include Echo and Little Wonder. Buyers must make sure they are choosing the correct fuel cap for their machine.

This is a genuine fuel cap gasket replacement designed for use in certain lawn and garden equipment engines. The fuel cap gasket is threaded onto the tank with the fuel cap, creating an airtight seal and ensuring that gasoline doesn't leak out while the machine is in use. This gasket can become corroded from the chemicals over time or simply become worn and ineffective at sealing as the rubber wears out. In some cases, the gasket is lost. A replacement with an OEM part like this will be required. This replacement fuel cap is manufactured to exact OEM standards by Echo and can be used for select models of hedge trimmers, blowers, edgers, and grass trimmers made by Echo, Little Wonder, and Shindaiwa. This gasket is sold as an individual unit and does not include any additional hardware or parts. This durable rubber gasket is easy to replace. Simply take off the fuel cap and remove the old gasket, if still present. Then, put the new gasket on the fuel tank or in the cap (depending on the requirement of the model being repaired) and replace the fuel cap. Be sure to allow the unit to cool and wear gloves when performing repairs.

This intake manifold gasket is a replacement part that will work with a range of types of lawn and garden equipment to prevent leaks and to stop debris from getting into the engine. Gaskets can start to wear down over time. They may become brittle or start to break apart. If the intake manifold gasket has failed, it can cause a range of problems for the engine. There could be leaks, and the engine may no longer function properly. Owners should check their gaskets if they are having trouble with their engine. If the gaskets are to blame, they need to be replaced. This genuine OEM replacement intake manifold gasket is sold individually. It can work with blowers, hedge trimmers, edgers, grass trimmers, string trimmers, and pole pruners. Compatible brands include Echo and Shindaiwa. Buyers who are looking for intake manifold gaskets need to be sure they are choosing the correct size for their make and model.

It is very easy to set aside the cap to a fuel tank. Many do so at traditional gas stations, which is why so many manufacturers create gas cap connectors or capless systems. When it is yard and garden machines, it is necessary for the makers to create connectors that keep the cap of a fuel tank connected to the tank itself. Often, machines cannot run if the cap is cracked or missing. This replacement fuel tank cap connector will work with a long list of home and garden machines from Echo, LIttle Wonder, and Shindaiwa. It is made of plastic and designed to last. This is an OEM replacement part that requires no tools for installation. It ships individually and is a very easy repair.

This is a replacement fuel line grommet for use with handheld outdoor lawn and garden equipment. The fuel line grommet is placed in the fuel tank to create a seal between the lines and the tank. The rubber grommet has three holes in it: a hole for the vent tube, fuel line, and fuel return line. The grommet may start to wear down over time or it could suffer other damage. When the fuel line grommet starts to fail, it will allow fuel to leak from the tank. It is important to replace the grommet when signs of trouble are noticed. When replacing the grommet, it is also a good idea to replace the fuel lines at the same time. This is a genuine OEM fuel line grommet to be used as a replacement for string trimmers, edgers, hedge trimmers, leaf blowers, and pole pruners. The grommet is compatible with models from Echo and Shindaiwa. This part is sold individually.

This felt fuel filter 125-527-1 is used to clean fuel before it reaches the carburetor. If clogged, this can restrict the flow of fuel to the carburetor, causing the engine not to start. Fits 3/16 inch ID fuel line and engines up to 30cc. This part is commonly used with blowers, chainsaws, edgers, shredders, and trimmers. Not compatible with greater than 10% ethanol fuel.

This clip attaches the fuel line to the engine’s carburetor. This clip is important as it keeps your outdoor tool’s fuel line attached to the fuel filter. If this connection comes loose, fuel will not be filtered properly and might not reach the rest of the engine. Clips are prone to becoming brittle over time and can easily snap due to their small size and location against the vibrating engine. While a faulty fuel line clip might not be the most obvious of problems, it’s an easy fix that only requires a metal hook. Fish out the fuel line from the empty fuel tank and take off the filter. Remove the faulty clip and replace it with the new one. This item is a genuine OEM product shipped straight from the original manufacturer and is compatible with Echo, Mantis, and Shindaiwa appliances. It can be used with chainsaws, hedge trimmers, edgers, pole pruners, tillers, and string tillers, and even leaf blowers.

A fuel pipe or fuel line moves gas from the tank to the engine. It is constructed from a durable yet flexible synthetic rubber material. It measures 3 x 5 x 70 mm and is made from a sturdy rubber material. You can use this fuel line with different machines like pole pruners, leaf blowers and tillers, and hedge trimmers. Over time, a fuel line can become brittle due to exposure to heat and gas, cracking and potentially causing fuel leaks. When operating a machine with a leaking fuel line, it can lead to more fuel consumption and even possible mechanical failure. This is why a fuel line in poor condition should be immediately replaced. To install this replacement fuel line, the spark plug should be removed. Empty the fuel tank before installing to prevent accidental spills. The V471001200 Fuel Pipe OEM Replacement is a genuine fuel pipe replacement made by Echo. This OEM fuel line is sold individually. If a genuine Echo Fuel Line Grommet is needed, it will need to be purchased separately.

Connected to the fuel vent tube, this fuel tank vent is necessary for proper fuel flow. Without this part, gas might leak out and cause damage. The vent allows air into the tank but will keep gas from coming out. This part enables the tank to breathe and helps relieve vacuum and pressure. It might be a challenge to identify if the fuel tank vent is damaged. Finding an air leak isn't easy, but a machine that demands more fuel may signal such a case. The installation of this part must be done in a well-ventilated area. Do not begin the repair without draining the existing fuel from the tank and disconnecting the spark plug wire. This fuel tank vent is a genuine OEM product sourced directly from the manufacturer and comes as an individual part. It can be used on many lawn maintenance items, including chainsaws, hedge trimmers, power blowers, power pruners, and edgers. It is compatible with models from Echo, Mantis, and Shindaiwa.